Panels- wood - Import export

Specific for preinsulated ductwork

STIFERITE Isoventilato a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on the top side by a water impermeable and vapore permeable Laminglass facer, and on the botton side by a saturated mineral fibre facer. Incorporated into the foam of the Isoventilato panel are wood (OSB3) laths that run along the entire length of the top side of the panel. The Isoventilato panel is suggested for insulation of ventilated roofs. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

Bonded to STIFERITE GT panels with various type of bitumen membranes GT 3 bonded to bitumenous membrane polymer of 3 kg/m², reinforced in fibre glass GT 4 bonded to bituminous membrane of 4 mm, reinforced in TNT polyester GT 5 bonded to bitumenous membrane of kg/m², reinforced in TNT polyester and slate chips’ finish The bonded panels GT 3 GT 4 GT 5 are suggested for insulation and as a waterproofing primer of flat and pitched roofs. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE RP is an high performance insulation board manufactured from CFC or HCFC free closed cell rigid polyisocyanurate polyiso foam. It's covered on both side with multilayer facing, and bonded to one side with a 13 mm (1/2 inch) plasterboard. It is available on request RP1 WP made with STIFERITE and a waterrepellent plasterboard 13 mm The RP panel is suggested for insulation of internal walls and suspended metal frame ceilings. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE BB a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by reinforced bitumenous paper. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE AI6 Edilizia a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by a 60 μm thick embossed aluminium facer. The STIFERITE AI6 panel is suggested for walls and floors. Ideal for applications requiring a vapore barrier. Available in AI8 version, embossed aluminium facer of 80 µm. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line..

STIFERITE FIRE B a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on one side by a mineralized fibre glass facers, and the other, to be positioned on toward the side more exposed to the risk of fire, by fibre glass with additional mineral fibre named STIFERITE FIRE B facer®. Specifically suggested for insulation of ventilated facades (it meets the requirements of the Technical Guide of “Anti fire safety requirements of facades in residential buildings” dated 15/04/2013). The FIRE B panel is suggested for Insulation of walls as in “ventilated facades”. Insulation for all applications where elevated fire reaction performance as in organic material insulation is required. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE Class SK a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by saturated fibre glass facers. The Class SK panel is suggested for external insulation walls in ETICSystem applications, correction of thermal bridges and porticoes. Panel used in ETICSystems with certification ETA Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE Class B a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on the top side by a bitumenous mineral fibre facer, ideal for hot torch applications, and saturated mineral fibre facer on the bottom side. The Class B panel is suggested for roofs under bituminous waterproofing mantles and where high resistance to a flame torch is required. Available in Class BH version, with compressive straight resistance of 200 kPa Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE GTE a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered by a GasTight multilayer aluminium foil facer reinforced on one of the sides by glass netting. The GTE panel is suggested for insulation of pitched roofs or flat roofs under synthetic mantles, walls, normal and heated floors, and applications requiring a vapour barrier. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE GT a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides with a special facer named Duotwin®. The GT panel is suggested for insulation of pitched roofs, flat roofs under cement slabs or synthetic membranes or bituminous glued, parameter walls, civil and industrial floors. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001 CE conformity marking on the entire line.

STIFERITE Class S a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by saturated fibre glass facers. The Class S panel is suggested for insulation of flat roofs under synthetic mantles inview or weighted down and under bituminous mantles applied cold (not torched), pitched roofs, walls and floors. Also available in version Class SH with compression strength resistance of 200 kPa Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Double Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The two overlapped floors structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The second floor is accessible through two staircases. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round, Liberty style. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Double Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The two overlapped floors structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The second floor is accessible through two staircases. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Single Decker Horses Merry-go-Round after the 18th century fashion. The carousel consists of an hot-dip galvanised rotating structure supported by a central column and covered by hand decorated fibreglass panels on which lighting is fixed. The floor structure is suspended from the ground by tie-bars hanged to the roof and the floor surface consist of clear coated solid hard-wood panels. The driving unit consist of AC self-braking gear-motor mounted to the central column and electronically controlled. All Jumping horses and the rocking chariot are moved by ball bearing mounted crankshafts located on the ceiling.

Hospital wardrobe available with one or 2 solid doors. Inside it has 2 shelves and a clothes rail. Base with 4 metal legs, height 200 mm, painted with epoxy-polyester powders, diameter 50 mm, with height-adjustable feet. Structure made of bi-laminated melamine wood particle panels on two sides, class E1 formaldehyde emission, scratch-resistant, with ABS perimeter edges. Sides, base and top 18 mm thick . Backrest inserted in milled, 10 mm thick

Hospital wardrobe available with one or 2 solid doors. 2 shelf and clothes rail configuration. Base with 4 metal legs, height 200 mm, painted with epoxy-polyester powders, diameter 50 mm, with height-adjustable feet. Structure made of bi-laminated melamine wood particle panels on two sides, class E1 formaldehyde emission, scratch-resistant, with ABS perimeter edges. Sides, base and top 18 mm thick . Backrest inserted in milled, 10 mm thick

Aluminium frame, honeycomb wood panel, adjustable hinges, magnetic lock. Wall opening needed cm 90×215.

Aluminium frame, honeycomb wood panel, adjustable hinges, magnetic lock. Wall opening needed cm 70×215.

Aluminium frame, honeycomb wood panel, adjustable hinges, magnetic lock. Wall opening needed cm 80×215.

Pocket door frame mod. Syntesis, honeycomb wood panel, flush recessed handle. Overall dimensions: cm 178×216.

Pocket door frame mod. Syntesis, honeycomb wood panel, flush recessed handle. Overall dimensions: cm 138×216.

Pocket door frame mod. Syntesis, honeycomb wood panel, flush recessed handle. Overall dimensions: cm 158×216.