Machine loading - Import export

SEALING MACHINE/BAGGING MACHINE MOD. SUPER - FOR MASSIVE PRODUCTS Machine consists of a loading tube on which a tubular film with a width of 50 cm is fitted. and a manually operated sealing bar. The loading tube is slightly inclined and facilitates the sliding of the product inside the film, without causing sudden falls. By lowering the sealing bar a perfectly sealed bag is obtained and at the same time the bottom of the next bag is created, a hot cutting system separates the two packages. The SUPER bagging machine can be positioned at the entrance barriers of hypermarkets, supermarkets, shopping centers, to reduce theft, small objects but it is also widely used for packaging technical items, clothing, linen, etc.

The robot stretch wrapping machine model. FP EASY ECO, battery-powered and automatic steering with overrunning side wheel (CE). Turning around the pallet automatically performs the film wrapping or network. Equipped with manual steering for driving forward and backward buttons, traction batteries maintenance-free gel, current transformer 24 V DC - 220 V AC, built-in charger, electric motors, three-phase inverter driving wheel height adjustment, front bumper security.Place the machine near the load to be wrapped Hook the film or the net to the load Select the wrapping program Press the start button The machine rotating around the load makes the winding and stops at end of cycle Cut the film manually Please note that the machine has a driving wheel side wheel to be placed in contact with the load, if the load surface or irregular shape must assess the suitability.

Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the pallet base and press the start button. The table starts to turn, after a few turns, press the coil rise button and hold it. When the coil of film reaches the top of the load stop the machine or press the down button to perform the double winding. Attention: the pallet must not have the inner crosspieces on the side of the transpallet. STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film

Wrapping Machine Mod. FP 15 SE/T with table cut for loading and unloading with pallet, and safety photocell, photocell height sensing pallet, digital panel with 3 programs winding, inverter for soft start, manual lock/cut of the film and automatic wrapping cycle (machine CE). NOTE: the machine is loaded from the side. When ordering, with a surcharge, it is possible to obtain the modification for the front load. UPON REQUEST WE CAN MAKE WITH WRAPPING MACHINES: Rotary table diameter mm. 1800 (pallets up to 1300x1300 mm)Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the base of the pallet, select the wrapping program and press the start button. The machine automatically winding and stops. Cut the film manually. Attention: the pallet must not have the inner crosspieces on the side of the transpallet.

COMPLETELY AUTOMATIC STRAPPING MACHINE MOD. JN85-M Fully automatic strapping machine with high speed and reliability. The machine is equipped with motorized belts for insertion in packaging lines, aluminum arc with multiple flaps to facilitate the launch of the strap and the subsequent release and electrical system with Omron PLC. The electrical panel of the machine can manage the motorized loading and unloading belts (optional) and allows the use of the strapping machine in lines without operator.

Mobile hydraulics applications cover a very wide range of mobile machines working in all kinds of environments, often under difficult operating conditions (operating outdoors, at the mercy of the weather) and in very dirty environments (grease and grease mixed with dust). Whether it is a mobile crane lifting heavy loads, a construction machine, a tunnel boring machine or a demolition tong, they all have very high requirements for functionality and durability. Often, a robust design for the durable use of the machine must be combined with a simultaneous reduction in weight. In all modern equipment, it is necessary to find sealing solutions that offer high static and dynamic sealing performance, low friction and suitable system guidance. HIDROMEC develops sealing systems for mobile equipment that are reliable, durable and comply with environmental standards.

The company specializes in belt conveyors and the handling of materials and parts of different kinds and types. We design and manufacture: Belt conveyors Screw conveyors Conveyors with metallic rolling shutters Wire mesh conveyors Chain conveyors Modular belt conveyors Motorized roller conveyors and roller conveyors Mechanical elevators Bucket elevators Loading machine with drawers Each of our machines is the result of careful analysis and design and is manufactured to meet all of the customer's criteria and requirements.

The power-driven uncoilers Mod. AP are utilized for feeding cold heading machines or wire drawing machines with wire of medium-big diameter. Their main functions are: Feed and pre-straighten wire from coils into the next production machine (an in-line wire drawing machine or a cold heading machine), with consistent reduction of downtimes. Make the wire advance to the feed rolls of the cold heading machine, with reduction of the load on the feeding mechanism of the cold header. Increase the overall efficiency of the cold heading machine. Our power-driven uncoilers Mod. AP cover a range of wire diameters from 12,0 to 36,0 mm. and can be supplied complete with the following accessory devices: Longer coil-holding arm, for utilizing heavier coils. Rotating base, for helping the operator in the coil loading phase, in case of small working areas. Additional set of straightening rolls. Cutting-off device. The power-driven uncoilers Mod. AP can be supplied also in the version with two...

The machine accurately doses gold and silver grains for the prodcution of bullions and cast bars. The Preci-dos is completely automatic, with dosing cells and grains transfers completely controlled by PLC. It has a number of steps to achieve accurate control on final weight. The grains container in the machine are loaded by gravity into the pre-dosing scale, to approach the final desired weight. After the pre-dosing step, a second phase starts to reach the final desired weight by adding a controlled quantity of gold or silver wire or powder (depending on customer specification) and the discharge the correct quantity of material into a container. To maintain accuracy and productivity, the machine is capable of self-learning, based on the continuous use. In particular the machine can statistically anticipate the average drop time of a single grain, to avoid overshoot.

Most advanced ecological & environmental friendly machine fully automatic & pneumatic operation, Loading door 500 mm for easy loading Ecological friendly – no external contamination solvent containment, filling, discharge and venting are completely sealed Adjustable Solvent Level with Computer closed circuit with heat pump compressor Freon R407a LOW NOISE – Scroll technology - Advanced super fast & efficient drying circuit Fridge gauges and pressostat group (High & low pressure) , with safety valve, soundproof compressor Advanced super fast & efficient drying circuit with automatic electronic temperature adjustment self cleaning fully automatic tank with frontal windows + S.S. insert Distillation Unit in stainless steel with internal inspection light & service hatch Ergonomic shape for faster distillation and avoid overflow – fully hermetic pressurized distillator Continuous OR fractional distillation

The boring machine, model TSB3, is designed for machining of hydraulic cylinders internal holes, with diameters from 20 up to 300 mm. The machine can be adjusted manually or automatically and it has got an electrowelded , normalized carpentry base . It is simple to use and easy to programm; it works with blocked piece and rotating tools on two opposing units. Toolholder devices, permit the machining of more diameters in the same workpiece, chamfing and internal and external threading. The machine can be adjusted manually or automatically and it has got an electrowelded , normalized carpentry base . The boring machine TSB3 is equipped with a bench with adjustable supports depending on workpieces size. The hydraulic self – centering vise ensures the perfect orthogonality of machining; the load and unload are made manually , by the operator. The machine is controlled by a CN Siemens SINUMERIK 840 D SL.

High quality fusing machine for clothing, outerwear, shirts and the automotive sector. The machine is available with a belt width of 600-750-1000mm. It has a working area of 1000mm long, which allows several operators to load the pieces to be thermoadhesive. Such area consists of a work surface and a belt section that easily receives the pieces to be loaded into the machine. The transport system consists of a lower belt and an upper belt, made of fiberglass with antistatic treatment, Teflon coated. Compensating rollers guide the belt, excluding the formation of folds and corrugations. The 910mm long heating surface is made up of a series of 6 laminated profiles that form curved panels. The pressure system can be single or double. The scraper bars in Teflon graphite allow the total detachment of the outgoing pieces, finally the cooling station ensures that the pieces may be unloaded by hand or automatically cool down in such a way as not to leave marks.

FULL OPTIONAL high quality fusing machine for clothing, outerwear, shirts and the automotive sector. The machine is available with a belt width of 1000-1200-1400-1600mm. It has a working area of 1400mm long, which allows several operators to load the pieces to be thermoadhesive. Such area consists of a work surface and a belt section that easily receives the pieces to be loaded into the machine. The transport system consists of a lower belt and an upper belt, made of fiberglass with antistatic treatment, teflon-coated without joints. Compensating rollers guide the belt, excluding the formation of folds and corrugations. The 1150mm long heating surface is composed of a series of 8 laminated profiles that form curved panels. Built with top quality materials, belt guide system with FESTO pneumatics, high temperature bearings, energy saving system and ECO heating system with solid state relays and “smart” thermostats. The pressure system can be single or double.

High quality fusing machine for clothing, outerwear, shirts and the automotive sector. The machine is available with belt width 1100-1220-1400-1600-1830mm (2000-2200-2500mm on request). It has a working area of 1100mm long, which allows several operators to load the pieces to be bonded. Such area consists of a work surface and a belt section that easily receives the pieces to be loaded into the machine. The transport system consists of a lower belt and an upper belt, made of fiberglass with antistatic treatment, Teflon coated. Compensating rollers guide the belt, excluding the formation of folds and corrugations. The 1400mm long heating surface is composed of a series of 10 laminated profiles that form curved panels.