Forks for forklift trucks - Import export

PLIERS FOR DRUMS MOD. DL FP 350 The clamp DL 350 for drums used to lift quickly and safely metal drums Lt. 200 and diameter mm. 600 and maximum weight of 350 kg. The pantograph structure for weight effect applied closes blocking with a strong grip on the drum board. The pliers can be attached directly to a crane or you can attach to the forks of a forklift truck using appropriate lifting straps (not supplied). If you use a forklift we recommend pairing with forks hook MKFP 1000.

Containment tanks made of robust, non-toxic, stabilized U. V. polyethylene, very resistant and light. They are suitable for the safe storage and emptying of 1000 liter tanks. The tanks can be forked with forklift trucks and transpallets and can be superimposed to facilitate storage when not in use. They are resistant to most acids, bases and oils. The standard color is orange but it is also possible to request the high visibility yellow tanks by paying a supplement and by contacting us in advance for confirmation. Monobloc - self-supporting with removable grid - movable with forklift The tanks are available in two models: FPC1 1000 PE single tub in polyethylene with capacity 1500 kg. - suitable for a 1000 l tank. FPC2 1000 PE double tub in polyethylene with capacity 2500 kg. - suitable for two 1000 l tanks. side by side.

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The bucket is secured to the forks of the forklift truck by means of the supplied chain and to carry out the overturning it is sufficient to operate the release lever directly from the driver's seat of the forklift truck (by means of a rope) and therefore to operate in maximum safety. The tipping container is complete with polyurethane wheels with brake and gas shock absorbers to control the tipping speed Features - Rotational molded monobloc container (robust, handy and light) - Double wall with cavity, smooth interior and rounded edges - Reinforced base with ribs - Forked structure built with galvanized steel - N° 2 gas shock absorbers and end-of-stroke device for progressive tipping - N° 2 fixed wheels and 2 swivel wheels with brake

The hook for forks MKFP 100 is made from a sturdy steel frame suitable for insertion of forks with section max. mm. 135x50, screws for locking to the forks and lifting swivel hook fitted with a safety lock. The fork hook allows you to safely lift loads up to 1000 Kg. Before purchasing it is essential to make sure that your lifter is certified to raise up 1000 Kg, considering installing this hook at about half the length of the forks.

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1025 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The telescopic structure of the elevator with a minimum height 1840 mm allows to pass under doors and openings. The lifter maintains a height of 1840 mm also lifting the load at a height of about 15 cm. Over 15 cm lifting of the load, the structure begins to slip and the height of the trolley increases to reach 3 meters when the load is raised to 2.5 meters. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1010 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder ( for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.