Forklift fork - Import export

The hook for forks MKFP 100 is made from a sturdy steel frame suitable for insertion of forks with section max. mm. 135x50, screws for locking to the forks and lifting swivel hook fitted with a safety lock. The fork hook allows you to safely lift loads up to 1000 Kg. Before purchasing it is essential to make sure that your lifter is certified to raise up 1000 Kg, considering installing this hook at about half the length of the forks.

Drum clamp to be installed on the forks of the forklift. The clamp is made of a sturdy steel frame and fork mounted with a forklift, the locking is ensured by two screws and a chain with safety catch that prevents the clamp from sliding off the forks. The coupling and release system of the drum is automatic and the operator must not get off the forklift. It is sufficient to bring the clamp close to the drum and lift. Closing of the clamp is favored by the weight of the drum; to unhook it, simply place the drum on the floor. The clamp cannot be used to handle empty drums. The clamp is suitable for 210 lt metal drums with a diameter of about mm. 580. The pliers can also lift plastic drums with edges but only of the type that can be seen in the picture.

MANUAL LIFTER FOR PALLETS MOD. FP SDJA 1016 with adjustable forks - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, forks with adjustable width. Caution: the front supports have fixed width standard of 570 mm. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm The descent is done by pressing the lever on the rudder.

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1016 AS with wide structure - shipped fully assembled! Lifts for pallet with hydraulic foot pump and steering or battery operation, steel structure with rounded tip of the forks, directional wheels in nylon with brakes and two front needle roller, fixed forks. (CE certificate). Version with forks width adjustable from 220 to 950 mm and wide frame. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder.

PLIERS FOR DRUMS MOD. DL FP 350 The clamp DL 350 for drums used to lift quickly and safely metal drums Lt. 200 and diameter mm. 600 and maximum weight of 350 kg. The pantograph structure for weight effect applied closes blocking with a strong grip on the drum board. The pliers can be attached directly to a crane or you can attach to the forks of a forklift truck using appropriate lifting straps (not supplied). If you use a forklift we recommend pairing with forks hook MKFP 1000.

Clamp for drums to install on the forks of the forklift. The clamp consists of a sturdy steel frame and fork mounted on a forklift. Operation: The connection and disconnection of the drum is automatic and the operator should not fall from the cart, simply push the caliper to the frame, apply light pressure and lift. The clamping device is extremely safe because it is constituted by a double hook, the release is done automatically by placing the drum to the floor. The trolley is suitable for lifting full drums, it is possible lifting the empty drums by pressing it over a pressure to hook the trolley. In the case of empty drums, a second operator must manually apply a pressure on the drum to enable the hooks to be activated.

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The bucket is secured to the forks of the forklift truck by means of the supplied chain and to carry out the overturning it is sufficient to operate the release lever directly from the driver's seat of the forklift truck (by means of a rope) and therefore to operate in maximum safety. The tipping container is complete with polyurethane wheels with brake and gas shock absorbers to control the tipping speed Features - Rotational molded monobloc container (robust, handy and light) - Double wall with cavity, smooth interior and rounded edges - Reinforced base with ribs - Forked structure built with galvanized steel - N° 2 gas shock absorbers and end-of-stroke device for progressive tipping - N° 2 fixed wheels and 2 swivel wheels with brake

METAL CONTAINERS WITH OPENABLE BOTTOM - MOD. FP B637/638 Very robust metal containers, suitable for the collection of processing waste and building materials. The CP-CT containers allow to be lifted with the forks of the forklift or with the 4-branch chains, depending on the model and arrangement. The operator can open the bottom of the body by using a rope and remaining at a safe distance. The openable bottom allows you to empty the container comfortably and quickly in larger containers or specific areas for disposal. Built in painted steel. All standard models are wheelless. The 1000 liter series can be equipped with wheels and cover.

Containment tanks made of robust, non-toxic, stabilized U. V. polyethylene, very resistant and light. They are suitable for the safe storage and emptying of 1000 liter tanks. The tanks can be forked with forklift trucks and transpallets and can be superimposed to facilitate storage when not in use. They are resistant to most acids, bases and oils. The standard color is orange but it is also possible to request the high visibility yellow tanks by paying a supplement and by contacting us in advance for confirmation. Monobloc - self-supporting with removable grid - movable with forklift The tanks are available in two models: FPC1 1000 PE single tub in polyethylene with capacity 1500 kg. - suitable for a 1000 l tank. FPC2 1000 PE double tub in polyethylene with capacity 2500 kg. - suitable for two 1000 l tanks. side by side.