Base metal - Import export

TIPPING BUCKET FOR MOVING SAND OR SNOW New bucket made with sturdy steel structure and high load capacity which makes it suitable for handling materials such as rubble, earth, sand, gravel, snow, fertilizers, grains etc., using a forklift. The automatic tipping is practical and safe, in fact, without getting off the elevator, the operator can operate the spring release system using a practical rope. TECHNICAL FEATURES: - Thick blade, welded on the bottom - Sturdy shovels for forking by forklift or vehicles equipped with forks - Two spring clips to cushion strong blows during unloading - Two-component acrylic water-based painting Red Ral 3000

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: For special alloys Material of product: HSSE PM Surface treatment: TiAlN For materials: Nickel-based superalloys (Incoloy, Inconel, Hastelloy,…), etc* Tensile strength up to: 1000 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material (powder metal) and surface treatment for nickel-based superalloys. The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C. It provides a better cutting performance and increased tool life time. The base material is powder metal (HSSE PM) with a higher hardness and toughness. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Materials: Nickel-based superalloys Incoloy 825, Inconel 718, Nimonic 75, Hastelloy X

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: For high-tensile materials and stainless steel Material of product: HSSE PM Surface treatment: TiAlN For materials: High-tensile materials, Stainless steel, Alloyed heat-treatable steel, Cast iron, Aluminium cast and wrought alloys, etc* Tensile strength up to: 1400 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for Stainless steel. The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C. It provides a better cutting performance and increased tool life time. The base material is powder metal (HSSE PM) with a higher hardness and toughness. The conical reduced leading thread improves chip drain and reduces thread friction. Tap for machine use in blind holes.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for through and blind holes, with straight flutes Application: For titanium Material of product: HSSE Surface treatment: no For materials: Pure Titanium and Titanium alloy Tensile strength up to: 1000 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H The geometrie and base material (HSSK powder metal) is made to cut into titanium and titanium alloy. Tap for machine use in blind and through holes. The short lead-in chamfer makes that tap universal in application. The flutes can hold the most part of the chips. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For special alloys Material of product: HSSE PM Surface treatment: TiAlN For materials: Nickel-based superalloys (Incoloy, Inconel, Hastelloy,…), etc* Tensile strength up to: 1200 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material (powder metal) and surface treatment for nickel-based superalloys. The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C. It provides a better cutting performance and increased tool life time. The base material is powder metal (HSSE PM) with a higher hardness and toughness. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes.

216 More - Professional multifunctional color trolley for hairdressers with 2 or more shelves made of scratch-resistant durable plastic Structure in chromed metal with 4-star base Round top worktop with containment edge Lower swivel shelves with adjustable height with removable trays designed for hook onto the edge of the tops themselves Colors Upper shelf Black, Ice, Gray and Orange - Lower shelves Black Removable trays Black, Ice, Gray and Orange Versions 216 P More Entry - with 2 shelves without trays and 4-star plastic base 216 M More Entry - with 2 shelves without trays and 4-star base in chromed metal 216 P More - with 2 shelves, 2 trays and 4 star base in plastic 216 M More - with 2 shelves, 2 trays and 4 star base in chromed metal 216 P More Top - with 3 shelves, 4 trays and 4 star base in plastic 216 M More Top - with 3 shelves, 4 trays and 4-star base in chromed metal Wheels

Hospital wardrobe available with one or 2 solid doors. 2 shelf and clothes rail configuration. Base with 4 metal legs, height 200 mm, painted with epoxy-polyester powders, diameter 50 mm, with height-adjustable feet. Structure made of bi-laminated melamine wood particle panels on two sides, class E1 formaldehyde emission, scratch-resistant, with ABS perimeter edges. Sides, base and top 18 mm thick . Backrest inserted in milled, 10 mm thick

Configuration: predisposition to receive clothes hanger rod, drawers and shelves. Base with 4 metal legs, height 200 mm, painted with epoxy-polyester powders, diameter 50 mm, with height-adjustable feet. Structure made of 0.8 mm thick steel sheet, with a particular process that eliminates sharp edges. Bottom and cap thickness 1.2 mm

Hospital wardrobe available with one or 2 solid doors. Inside it has 2 shelves and a clothes rail. Base with 4 metal legs, height 200 mm, painted with epoxy-polyester powders, diameter 50 mm, with height-adjustable feet. Structure made of bi-laminated melamine wood particle panels on two sides, class E1 formaldehyde emission, scratch-resistant, with ABS perimeter edges. Sides, base and top 18 mm thick . Backrest inserted in milled, 10 mm thick

216 Easy - Professional color trolley for hairdressers with 1 shelf made of scratch-resistant durable plastic Structure in chromed metal with 4-star base Simple round worktop with containment edge Colors Black, Ice, Gray, Orange Versions 216 P Easy Basic - with 4-star plastic modular base and non-slip feet 216 M Easy - with 4-star chromed metal base 216 P Easy - with 4-star plastic modular base 216 M Easy UP - with height-adjustable top (min. 82 max. 119 cm ) and 4-star base in chromed metal 216 P Easy UP - with height-adjustable top (min. 82 max. 119 cm) and 4-star modular base in plastic Wheels It can be equipped with removable transparent wheels D74 silent and anti-hair with plastic or metal covers or removable in plastic D48 or D74

216 Double - Professional color trolley for hairdressers with 2 shelves made of durable scratch-resistant plastic Structure in chromed metal with 4-star base Upper surface equipped with aluminum sheet cutting and containment system Equipped with 4 color bowls with brush Lower height swiveling surface adjustable with containment edge and two removable trays designed to hook onto the edge. Colors Flat Black Bowls with brush Black, White, Red, Ice, Gray and Orange Removable trays Black, White, Red, Ice, Gray and Orange Versions and Accessories 216 M Double Entry - without trays and with 4-star base in chromed metal 216 P Double Entry - without trays and with 4-star plastic modular base 216 M Double - with 4-star chromed metal base 216 P Double - with 4-star plastic modular base Wheels Can be equipped with transparent removable wheels D74 silent and anti-hair with cover in plastic or metal or removable in plastic D48 or D74

216 Work - Professional color trolley for hairdressers with 1 shelf made of durable scratch-resistant plastic Structure in chromed metal with 4-star base Top equipped with cutting and containment system for aluminum sheets Equipped with 4 color bowls with brush Colors Top Black Bowls with brush Black, White, Red, Ice, Gray and Orange Versions 216 M Work - with 4-star base in chromed metal 216 P Work - with 4-star modular base in plastic 216 M Work UP - with height-adjustable top (min.82 max. 119 cm) and 4-star metal base 216 P Work UP - with height-adjustable top (min. 82 max. 119 cm) and modular 4-star plastic base Wheels It can be equipped with transparent removable D74 silent and anti-hair wheels with plastic or metal cover or removable in plastic D48 or D74

Liquid elastomeric sheath in aqueous dispersion based on special styrene acrylic elastic resins, for waterproofing of terraces prior to laying of tiles, restoration and maintenance of old bituminous sheaths, protection and Waterproofing of roofing in fibre cement and sheet metal, tiles and Marmette, waterproofing in general of sloping non-walkable surfaces, protection and decoration of bituminous coverings and waterproofing coatings with a bitumen-based polymer, Finishes of metallic structures with protective bituminous background, rough or plastered masonry works, prefabricated in general, etc.