Automatic cutting - Import export

Semiautomatic seam saw for the automatic cutting of any type of can. Features include electropneumatic operation of blades with adjustable advancement, total retraction of blades if the protective cover is opened, modular fittings for can blocking, CEstandard protection and high soundproofing. Mono or triphase motors available.

Our staff, who are specially trained and kept constantly up-to-date with the latest developments, produce special and automatic machines, production lines and industrial plants, automation and handling systems, prototypes and newly developed machines, material handling and automation systems, equipment and lines. The on-site engineering department at the Nole plant provides specialist consulting on the production of ad hoc industrial machines and systems, which are designed according to customer requirements using advanced 3D design software. Below are some examples of machinery produced : Equipment for the production of foam rubber Automatic cutting lines for rubber Industrial washing facilities Drying ovens Inspection machines Newspaper sorting plants Polymer tempering plants Rolling mills for pasta and kneading machines

Wrapping machines with rotating ring series RING BOX EVO with automatic hook/cut of the film automatic and manual advancement, for the packaging with stretch film of sections, bars, boards and products with elongated shape. Practical and economical, allow to lower operating costs thanks to low consumption of energy and materials. The introduction of the products to be packaged is manual and is made by sliding them on a idle roller conveyor. By a foot pedal, is carried out the winding of the film on the product to the desired time; at the end of the cycle, with a slight movement of the pack, is obtained the cold-cutting of the film. All operations are controlled by PLC.

FPX800 LEVER HAND DISPENSER - FOR GUMMED PAPER Manual dispenser suitable for measuring and cutting the gummed paper. Lever operation. Equipped with automatic cutting blade and water tank. The length of the paper strip is adjustable by lever with adjustable stroke. By simply pressing the lever, a strip of wet paper is obtained, ready to be applied to the box. The wetted paper ensures a much higher seal than the adhesive tape and provides a clear indication on the tampering of the box. Unlike the adhesive tape, to open the box it is necessary to break the paper and it is not possible to close it again.

The operator wrap the product with the strap, put the two ends through the buckle and places into the strapping tool. The first end is locked with the brake while the second is placed under the cutter and inside the tension roller. Increasing the tension of the strap, the buckle keeps the tension. After reaching the desired tension the strap is cut automatically by the tensioning device.

Compact table-top Electronic Pressure Sensitive Tape Dispenser that delivers accuracy with the touch of a button. The dispenser can utilize various pressure sensitive tapes, including masking tape, Scotch® tape and strapping tape, making it ideal for sub-assembly areas and small package sealing. The PS2A will maintain the integrity and superior quality standards that have made Better Packages, Inc. a leader in the manufacturing and packaging industry. Special Features and Functions: - Automatically dispenses and cuts tape to the exact pre-set length. - Special adjustable core allows for 1" to 3" tape core sizes. - Color-coded, smooth touch keypad for ease of use. - Heavy-duty, 5-foot long electrical cord. - Grounded for enhanced safety.

Wrapping Machine Mod. FP 15 SE/T with table cut for loading and unloading with pallet, and safety photocell, photocell height sensing pallet, digital panel with 3 programs winding, inverter for soft start, manual lock/cut of the film and automatic wrapping cycle (machine CE). NOTE: the machine is loaded from the side. When ordering, with a surcharge, it is possible to obtain the modification for the front load. UPON REQUEST WE CAN MAKE WITH WRAPPING MACHINES: Rotary table diameter mm. 1800 (pallets up to 1300x1300 mm)Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the base of the pallet, select the wrapping program and press the start button. The machine automatically winding and stops. Cut the film manually. Attention: the pallet must not have the inner crosspieces on the side of the transpallet.

The fully automatic strapping machine mod. TP 201 with side sealing is particularly suitable for strapping furniture, household appliances, palletised loads and high packages. It can be inserted in lines where the available space or the limited height of the conveyor do not allow the use of a standard strapping machine. The strap is automatically launched, tensioned, welded and cut, speeding up the strapping operations. The strapping machine, suitably modified, can be easily inserted into automatic packaging lines and can also work without an operator.

Electromechanical automatic rebar cutting bench equipped with 2 side folding pockets. MobiPocket allows the unloading and lateral discharge of bars greatly reducing the clutter. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance.

Electromechanical automatic bar cutting bench with 5 transfer roller tracks and a second additional rebar conveyor. Thanks to the second transfer track, parallel to the cutting unit, cutbars can be placed along the whole length of the roller track optimizing the use. This means that the same roller track can be used to store different orders. Basically, it is as if you had a much greater number of roller tracks allowing a better cutting optimization thus reducing the quantity of scraps. The bar cutting bench "OPTIBAT 5" represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance.

Electromechanical automatic rebar cutting bench with 3 transfer roller tracks and a second additional rebar conveyor. Thanks to the second transfer track, parallel to the cutting unit, cutbars can be placed along the whole length of the roller track optimizing the use. This means that the same roller track can be used to store different orders. Basically, it is as if you had a much greater number of roller tracks allowing a better cutting optimization thus reducing the quantity of scraps. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance.

Electromechanical automatic rebar cutting bench with 6 transfer roller conveyors. The cutting bench 'BAT 6' represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Thanks to 6 different chambers optimise processing of small orders even without the transfer unit. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance.

Electromechanical automatic rebar cutting bench with 3 transfer roller conveyors. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance.

Electromechanical automatic mesh cutting and bending machine for the production of U, L, Zshaped mesh and sandwich panels. Mesh handling is guaranteed by clamps driven by electric servomotors. Max mesh width 1250 mm; Max mesh length 6000 mm.

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 12 mm (#3). Driven by digital electric servomotors. Max pulling speed 160 m/ min (525 ft/ min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m).

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 8 mm (0.315 in.). Driven by digital electric servomotors. Max pulling speed 160 m/min (525 ft/min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Fixed cut with automatic backstop length for a maximum cutting flexibility (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m).

Fast automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 16 mm (#5). Driven by digital electric servomotors. Max pulling speed 240 m/min (790 ft/min) Straighteners (horizontalvertical) with electronic setting Rollers for the extraction of the last part of the coil (Optional) Automatic 6inlets motorized wire change and insertion unit (Optional) Patented motorized horizontal wire change unit which allows to change the diameter and the coil in "Zero time" (Optional) Web Teleassistance

Automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4). Driven by digital electric servomotors. Capacity 2 Ø 10 mm (#3) Max pulling speed 150 m/min (495 ft/min) Straighteners with independent position and adjustment displays for the wires Cutting with Brushless Motorized wire change unit Web Teleassistance

double heating system with pre-heating that concurs to fuse with very low temperature respect to the standard temperature pressure system with “OUT” function for very delicate woven inside and outside belts cleaning devices carbon/graphite lower belt separation blade automatic turn ON and turn OFF by digital timer COUPLING, LAMINATION, TRANSFER, APPLICATIONS - COMPLETE LAMINATION LINE THAT CONCURS THE COUPLING OF 2 OR MORE LAYERS OF WOVEN WITH INTERLININGS, WEB GLUE OR FILM GLUE DIAGNOSTIC ON THE CONTROL PANEL introducion of the several rolls of wovens, interlinings, web glue or film glue by engine rolls perfect syncrony between fusing machine winding module and rewinding unit by inverter automatic cut machine availabilty for worked parts winding unit with vertical and horizontal control for a perfect alignment of the woven rolls during the winding fusing machine connected to the winding and rewinding module by inverter exit zone with rewinding unit equipped

The vertical spoolers which take-up the smooth or ribbed wire coming from the cold rolling line, can be supplied also in the version Mod. BVD with double reel, for reducing the downtimes. Tecno Impianti designs and manufactures this machine both in the version with manual cut of the wire and with automatic blocking and cut of the wire. The double vertical spooler can be supplied in the version for 2 or 3 Tons reels

Rock22 is an automatic variable weight portioning machine designed to work in line. A professional solution to perform the “rock” cut of hard cheeses. The cheese is automatically cut in a perfectly identical way to the "fresh" cut, made by hand: (the surface of the product remains rough and maintains all the organoleptic and aesthetic qualities of the freshly cut cheese). With the use of smooth blades it can cut standard portions of less seasoned cheeses (eg caciotte). Extremely fast: average hourly production of 32 pieces of 1 kg of about 55 wheels of Parmesan type cheese Allows you to set the type of cut based on: Standard servings: 1/2, 1/4, 1/8, 1/16, 1/32 of wheel. Special portions: 1/10, 1/12, 1/20, 1/24, etc. (with immediate replacement of the cutting plate and automatic recognition by the PLC).

Automatic machine for cutting cheese into slices with variable or predetermined weight and dimensions. Versatile and flexible, the ROCK 20PLUS model is designed to work in line with other machines from Caseartecnica Bartoli or stand alone. Technical features Rock 20 Plus automatic for cutting cheese: Small size. Suitable for working in line with pre-existing machines or by Caseartecnica Bartoli, for the complete automation of the production cycle. Number of cuts programmable by PLC. Interchangeable bells, for the perfect centering of cheeses with different shapes. Quick and easy replacement of the bells. Fully automatic operating cycle. Easy-to-extract worktop to facilitate cleaning and sanitizing of the machine. Multiple recipes for various types of products and cuts. Special, interchangeable blades for cutting semi-hard, hard and very hard cheeses. Automatic weighing with external scale. Programmable fixed weight cutting.

Semi-automatic, compact cutting machine designed to horizontally split cheese. Gives the same results as when hard cheeses are cut manually, reducing waste to a minimum. Main technical features: Horizontal circular cutter, for precise incision of the rind with no waste Safety sensors to detect the presence and correct centring of the wheel Made in compliance with EC standards

For the cutting of hard and semi-hard cheese we offer a wide range of semi-automatic portioning machines suitable for cutting all types of gifts, ranging from counter machines to automatic lines. The automatic lines are supplied to a large part of the Italian and foreign GDO. In particular: Automatic, semi-automatic and semi-manual cheese cutting machines. Portioning machines, which allow you to accurately divide the cheese into slices of customizable size. Horizontal disconnectors, which perform the horizontal cut of the shapes. Automatic cleaners, to eliminate the impurities present on the rind of aged cheeses before cutting and packaging. Automatic graters, which allow to obtain a homogeneous and ready-to-use finished product. Flattening machines, to precisely cut the upper and lower plate of the forms, for packaging.