Results for
NOVACCIAI MARTIN SPA
Italy
Ground bars Alloy Steel, Non-Alloy Steel and Stainless Steel Ø 6,00 ÷ 200,00 (IT9 ÷ IT6) EN 10278
Request for a quoteDRAGFLOW SRL
Italy
Hydraulic motor Radial piston Displacement [cc] 1240 R.P.M. 30 Capacity (l/min) 40 Max Torque (Nm) 5300 Additional Weight (kg) 350 Tooth system materials: harder and tougher alloy steel.
Request for a quoteNOVACCIAI MARTIN SPA
Italy
Cold drawn bars (+C EN 10277) Alloy Steel, Non-Alloy Steel and Stainless Steel Ø 8,00 ÷ 74,00 ( ≥IT9 ) EN 10278
Request for a quoteNOVACCIAI MARTIN SPA
Italy
Peeled & reeled bars (+SH EN 10277) Alloy Steel, Non-Alloy Steel and Stainless Steel Ø 10,00 ÷ 200,00 ( ≥IT9 ) EN 10278
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Round die. Metric, ISO DIN 13. HSSE. DIN 223. Tolerance ISO-6g. For high-tensile materials. Up to 1200 N/mm2. Professional thread cutting Thread standard: Metric, ISO DIN 13 Type: Round die Application: For high-tensile materials Material of product: HSSE Spiral entry: yes For materials: Tensile strength up to: 1200 N/mm2 Standard: DIN 223 Tolerance: ISO-6g Special geometry for high-strength material. Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For high-tensile materials Material of product: HSSE Surface treatment: TIN For materials: High-tensile materials, Alloyed heat-treatable steel, Cast iron , Aluminium cast and wrought alloys, Copper and alloys, etc* Tensile strength up to: 1300 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for high-strength material. The TIN surface treatment (titanium-nitride gold-yellow) increases the surface hardness (approx. 2300 HV) and the sliding properties. It provides a better cutting performance and increased tool life time. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Materials: High strength material up to max. 1300 N/mm² Alloyed heat-treatable steel, cast iron with nodular graphite, malleable cast iron Aluminium cast and wrought alloys Si<5% (long-chipping)
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric Fine, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For high-tensile materials Material of product: HSSE Surface treatment: TIN For materials: High-tensile materials, Alloyed heat-treatable steel, Cast iron , Aluminium cast and wrought alloys, Copper and alloys, etc* Tensile strength up to: 1300 N/mm2 Standard: DIN 374 Tolerance: ISO2/6H Special geometry, base material and surface treatment for high-strength material. The TIN surface treatment (titanium-nitride gold-yellow) increases the surface hardness (approx. 2300 HV) and the sliding properties. It provides a better cutting performance and increased tool life time. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Materials: High strength material up to max. 1300 N/mm² Alloyed heat-treatable steel, cast iron with nodular graphite,
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: For high-tensile materials Material of product: HSSE Surface treatment: TIN For materials: High-tensile materials, Alloyed heat-treatable steel, Cast iron , Aluminium cast and wrought alloys, Copper and alloys, etc* Tensile strength up to: 1300 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for high-strength material. The TIN surface treatment (titanium-nitride gold-yellow) increases the surface hardness (approx. 2300 HV) and the sliding properties. It provides a better cutting performance and increased tool life time. Tap for machine use in blind holes. The fast spiral flutes provide good chip removal from the blind hole. Materials: High strength material up to max. 1300 N/mm² Alloyed heat-treatable steel, cast iron with nodular graphite, malleable cast iron Aluminium cast and wrought alloys Si<5% (long-chipping)
Request for a quoteBIBIELLE S.P.A.
Italy
Zirconium discs, Y-weight backing. Main features and benefits: Zirconium ensures highly efficient removal in all applications requiring high operating pressure. Recommended applications: Mould making, manufacture of small-sized tanks and equipment Work surfaces: Stainless steel, alloyed steel, titanium, glass fibre.
Request for a quoteBIBIELLE S.P.A.
Italy
Zirconium-grained fibre discs – crosscut hole. Main features and benefits: Excellent removal at high pressures, quite a long life and good surface finish. Recommended applications: Deburring, removing welding seams, highly resistant materials. Work surfaces: Stainless steel, alloyed steel, heat-resistant nonferrous materials.
Request for a quoteBIBIELLE S.P.A.
Italy
Zirconium-grained fibre discs – round hole. Main features and benefits: Excellent removal at high pressures, quite a long life and good surface finish. Recommended applications: Deburring, removing welding seams, highly resistant materials. Work surfaces: Stainless steel, alloyed steel, heat-resistant nonferrous materials.
Request for a quoteBIBIELLE S.P.A.
Italy
Zirconium discs, Y-weight backing. Main features and benefits: Zirconium ensures highly efficient removal in all applications requiring high operating pressure. Recommended applications: Mould making, manufacture of small-sized tanks and equipment. Work surfaces: Stainless steel, alloyed steel, titanium, glass fibre.
Request for a quoteBIBIELLE S.P.A.
Italy
These are similar to the Satin Machine wheels but are made laying the non woven in a way that waved edges are obtained. Features and benefits: For applications on wide areas which require a higher uniformity finishing, the RFV allow a higher uniformity among the various steps on the surface. Recommended applications: Satin finishing large surfaces. Work surfaces: Stainless steel, standard or alloyed steel, nonferrous metals and alloys, aluminum, cast iron, titanium, plastic.
Request for a quoteBIBIELLE S.P.A.
Italy
Y-weight polyester backing, Zirconium grain, double resin, close coat. Main features and benefits: Extremely long life and highly efficient removal. Medium/high operatingpressures are required. This product can be supplied in customised sizes. Recommended applications: Grinding and cleaning, deburring, removing small protruding weldedsurfaces or welding spots. Work surfaces: Stainless steel, alloyed steel.
Request for a quoteBIBIELLE S.P.A.
Italy
Y-weight polyester backing, Zirconium grain, double resin, close coat. Main features and benefits: This product is available in the most widely used sizes for industrial grinders. Extremely long life and highly efficient removal. Medium/high operating pressures are required. Recommended applications: Grinding and cleaning, deburring, removing small protruding welded surfaces or welding spots. Work surfaces: Stainless steel, alloyed steel.
Request for a quoteBIBIELLE S.P.A.
Italy
Y-weight polyester backing, Zirconium grain with cooling additive, double resin, closecoat. Main features and benefits: This product is particularly suitable for applications requiring highly efficient removal, extremely quick cutting performance and low operating temperature. This product can be supplied in customised sizes. Recommended applications: Deburring, removing protruding welded surfaces and excess material, removing scale. Work surfaces: Stainless steel, alloyed steel, aluminium, cast iron.
Request for a quoteBIBIELLE S.P.A.
Italy
Economic version of the flap discs. Available in back up pad discs and fiberglass version. Features and benefits: These discs offer good cutting and have a good ratio cost/performance. These are particularly suitable for non continuous processing where cutting speed and costs are the main elements. Recommended applications: Deburring, removing welding seams and spots, removing scale, rust and oxidation of any kind, blunting sharp corners and edges. Work surfaces: Stainless steel, alloyed and unalloyed steel, aluminum, nonferrous metals and alloys, structural steel, cast iron, titanium, plastic, pain, varnish, filler.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Alloy steels - Import exportNumber of results
18 ProductsCompany type