Machines and equipment - Import export

WHEELED BASES FOR DRUMS SERIES SD FP55 (DRUMS DIAMETER mm. 580/600) Reinforced wheeled bases for the transport of drums with a diameter of about 610 mm. and weight max. 250 Kg. The SD Series enables a high stability and security because it has wheels polyurethane installed outside the structure. The wheeled bases are available in yellow. Available models: SD FP55B wheeled base made of painted steel SD FP55D wheeled base made of stainless steel SD FP55F wheeled base made of painted steel - reinforced

VOLUMETRIC DOSERS KFG SERIES with adjustable cups for powder and granular products Dispenser made entirely of AISI 304 stainless steel, suitable for packaging powder and granular products in preformed bags with volume from 125 to 2000 ml. (depending on the model) The cups are adjustable and indicatively the volume can be reduced to 50% of the maximum capacity. Main features: - sturdy support structure in stainless steel - 25 liter capacity loading hopper - adjustable cups - product discharge cone - start pedal for product unloading

FLG SERIES AUGER DOSING SYSTEM FOR POWDERS Vertical augervolumetric dosingfor non-sliding powdersuch as flour, cocoa, sugar, ground spices, coffee, finely ground, chemicals, premixedbuilding,ice creamor sorbet, etc. Capacity from 100 to 5000 ml - Rugged stainless steel with basic overview - Product loading hopper in stainlesssteel AISI304 with inspection hatch - Start with electric-operated pedal - Electrical panelwith PLC

Drum clamp to be installed on the forks of the forklift. The clamp is made of a sturdy steel frame and fork mounted with a forklift, the locking is ensured by two screws and a chain with safety catch that prevents the clamp from sliding off the forks. The coupling and release system of the drum is automatic and the operator must not get off the forklift. It is sufficient to bring the clamp close to the drum and lift. Closing of the clamp is favored by the weight of the drum; to unhook it, simply place the drum on the floor. The clamp cannot be used to handle empty drums. The clamp is suitable for 210 lt metal drums with a diameter of about mm. 580. The pliers can also lift plastic drums with edges but only of the type that can be seen in the picture.

LF FP800 – TILTER FOR DRUMS SUITABLE FOR FORKLIFT The tilter for drums LF FP800 it has fork mounted structure with elevator cart and is suitable for lifting and emptying 200 liter metal drums with 580-600 mm. diameter. The device is complete with bracket for locking the drum, frontal safety rod and bevel gearbox with handwheel for rotation. More about CE certification The equipment is supplied complete with CE certification and manual of use and maintenance related to the sole subject of the sale. Before using the machine, the customer must check that the elevator cart on which the object will be installed is in compliance with all regulations, including lifting combination and equipment. It is also responsibility of the customer to inform of any special tests that must be performed before use. By purchasing the customer, he/she becomes aware of this information and, where necessary, undertakes to test his/her elevator before using it with the mounted equipment.

CART DRUM MOD. DE FP 450 The trolley for drums DE FP 450 allows a single operator to lift and carry in a fast and secure way metal drums with a maximum weight of 300 Kg. The cart has an automatic hook grip with height adjustment, rubber wheels, roll-back support, handle with rubber grips. Suitable for use on smooth floor. Operation: The operator must approach the trolley to the full drum by inserting the bottom of the catch hook under the rim of the drum and levering it with the foot on the bottom of the trolley, tilting it slightly to lift the drum. Thanks to the weight of the drum, the hook automatically snaps and locks the drum firmly. To unhook the drum simply place the base of the drum on the ground, pull the bottom of the trolley toward it, then disengage the bottom of the catch that automatically reopens. In the case of empty drums, the operator must manually apply a pressure on the drum to allow hook activation.

Clamp for drums to install on the forks of the forklift. The clamp consists of a sturdy steel frame and fork mounted on a forklift. Operation: The connection and disconnection of the drum is automatic and the operator should not fall from the cart, simply push the caliper to the frame, apply light pressure and lift. The clamping device is extremely safe because it is constituted by a double hook, the release is done automatically by placing the drum to the floor. The trolley is suitable for lifting full drums, it is possible lifting the empty drums by pressing it over a pressure to hook the trolley. In the case of empty drums, a second operator must manually apply a pressure on the drum to enable the hooks to be activated.

Stackable and suitable for forks lift. Available industry version (industrial gray) or food version (RAL 7001). Ideal for textile industry, pharmaceutical industry, metalworking, plastics processing and food industry. Easy to clean, does not absorb smells and humidity. Storable outdoors. Available with feet, runners or wheels. Are movable with pallet trucks and forklift. Approximate weight 17 kg. The bins can be ordered with 4 legs, runners and 4 wheels without brakes. The version with 4 wheels without brake can be transformed into the version with 2 or 4 wheels with brake by purchasing the relative accessory. This is only a surcharge that must be applied to the bins that already has wheels (it cannot be applied to the bins with the feet).

CARTON SEALER MACHINE MOD. FP 9037 - UPPER AND LOWER BELTS The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close fixed format boxes (with constant height and width). Structure of the body in painted steel. Movement of boxes happens via two lower dive belts and two upper drive belts, adjustments for the different formats are carried out using flywheels. The machine is equipped with idle rollers 400 mm length for loading and unloading. The machine is equipped with wheels with brake.

CARTON SEALER MACHINE MOD. FP 9070 - DOUBLE DRIVE SYSTEM CONSISTS OF TWO LOWER SIDE BELTS AND TWO UPPER BELTS. Machine suitable for large boxes, the double drive system ensures a regular feed even in presence of high and light boxes. The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close fixed format boxes (with constant height and width). Structure of the body in painted steel. Movement of boxes happens via two lower dive belts and two upper drive belts, adjustments for the different formats are carried out using flywheels. The machine is equipped with idle rollers 400 mm length for loading and unloading. The machine is equipped with wheels with brake.

COMPLETELY AUTOMATIC STRAPPING MACHINE MOD. JN85-M Fully automatic strapping machine with high speed and reliability. The machine is equipped with motorized belts for insertion in packaging lines, aluminum arc with multiple flaps to facilitate the launch of the strap and the subsequent release and electrical system with Omron PLC. The electrical panel of the machine can manage the motorized loading and unloading belts (optional) and allows the use of the strapping machine in lines without operator.

VERTICAL VACUUM SEALING MACHINE FOR BAGS - ALSO WITH MAP GAS INLET The sealers mod. DZQ 600 LS/DZQ 800 LS are multifunctional machines suitable for sealing and vacuum packing large bags and sacks, also in MAP (with technical gas injection). The vacuum pump of 20 mc./h. it minimizes air intake times and the machines are equipped with valves for the injection of inert gas for packaging in a modified atmosphere. The double sealing bars with a width of 10 mm. and compressed air closure ensure perfect sealing on any type of material, even of high thickness. The bars are closed by means of a double button command (dual safety control). The sack support surface is adjustable. Thickness max. bag mm. 0.20 (0.8 total with bellows) By means of selectors and potentiometers it is possible to set the "sealing", "empty time" and "gas injection time" functions. The machine is equipped with two nozzles which, when the vacuum option is activated, descend into the bag and perform suction.

Machine suitable for the closing of bags with height, mm. to 150 mm. 270 and max weight. 3 kg. The welding system with belts PTFE allows for closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is adjustable from 0-250° C. and the feed speed is adjustable from 0 -12 mt. / min.The welding head is adjustable in height and the distance between the welding and the edge of the bag is 10 mm. The machine is equipped with rotary solid ink marker and interchangeable characters (up to 20 characters with a height of 5 mm.), The system works with inked rollers for easy management and is complete with a photocell to do the marking in the desired location. This model is constructed in the standard version, that is, the advancement of the product occurs from right to left.

Machine suitable for closing bags mm height. 200 mm. 320 and max weight. 5 kg. The welding system belt PTFE allows closing bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc.. The temperature is controlled by an electronic controller and thespeed is adjustable. The distance between the sealing and the edge of the bag is 10 mm. The sealing head is adjustable in height. The machine is equipped with a marker rotary heat and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy readingand comes complete with photocell to make a mark at the desired point.

Continuous band sealer suitable for closing horizontal bags with a maximum height mm. 400 and max weight. 5 kg. By using PTFE seal belts, polyethylene, polypropylene, cellophane, paper, aluminum, and other laminates can be sealed. The temperature is controlled by an electronic controller and the speed is adjustable. The distance between the solder and the edge of the bag is 20 mm. The distance (width) between the welding headand the conveyor belt is adjustable and is also adjusted the height of the conveyor belt to the plane of welding. The machine is equipped with a marker rotary heat and interchangeable characters (20 charactersmax height 5 mm.), The system works with inked rollers for easy reading and comes complete withphotocell to make a mark at the desired point.

CARTON SEALER MACHINE MOD. GEM 350 / GEM 360 / GEM 820 WITH ADJUSTABLE FORMAT AND WITH UPPER AND LOWER DRIVE BELTS The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close boxes high and narrow. Ideal for fixed format boxes close (with constant height and width). Structure of the machine body made of sheet steel bent, bolted and painted. The movement of the cartons is done by two side drive belts driven by a single motor, adjustments for the different formats are made through flywheels. The machine is equipped with 4 wheels with brakes.

PACK POINT 08 - CASE ERECTOR Semiautomatic carton erector. It forms the bottom of uniform size batches of American type boxes, with operator. Operation is simple , just insert the open box in the case erector. The four bottom flaps are folded and the box is automatically locked in position for filling. A pneumatic pusher makes the expulsion of the box to a taping machine . The PACK POINT 08 when combined with a taping machine is a compact and productive semi-automatic packaging line. The machine is equipped with 4 wheels with brakes.

CARTON SEALER MACHINE MOD. GEM 350 - GEM 360 - GEM 380 WITH ADJUSTABLE FORMAT AND WITH UPPER AND LOWER DRIVE BELTS. The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close boxes high and narrow. Structure of the machine body made of sheet steel bent, bolted and painted, the movement of the cartons is done by four drive belts flat, two lower and two upper, driven by a single motor, adjustments for the different formats are made through flywheels. The box has to get on the work surface with the top flaps closed. The machine is equipped with 4 wheels with brakes.

DOUBLE CHAMBER STAINLESS STEEL VACUUM MACHINE WITH TRANSLATING HOOD FPHVC 820G - WITH ATM AND 100 m³/h PUMP Large vacuum packaging machine with two stations equipped with front and rear sealing bars, translating bell equipped with a comfortable handle and springs for weight balancing. Construction in stainless steel (AISI 304) with rounded shapes for easy cleaning, digital panel, vacuum gauge for constant vacuum control and 100 m³/h vacuum pump for a high packaging speed. The opposing sealing bars have a length of mm. 820 and the distance between the front bars and the rear bars is 700 mm. The machine is equipped with a gas injection valve (packaging in MAP).

CHAMBER VACUUM PACKAGING MACHINE DZ 410 T - VERTICAL Vacuum packaging machine for packaging in vertical envelopes containing coffee, rice, tea, powder products, fluid products, etc. The machine is built in stainless steel (AISI 304) and equipped with an electronic volumetric sensor with 3 programs digital panel. The compact size chamber and the vacuum pump with a capacity of 20 m3/h. ensure high productivity. Also available with filter for packing powdery products such as hazelnuts flour, milk powder and products with similar characteristics. The filter must be requested at time of order. The packaging machine is equipped with a painted wheeled support. Max thickness bag mm. 0.20 (0.8 total with bellows). By equipping the machine with jigs realized according to the specific dimensions of the product to be packaged, it is possible to obtain squared packs. The templates are not included with the machine.

Wrapping machine semi-automatic with turntable mod. FP BOX - TIRES, suitable to the winding of tires coupled with internal diameters from 300 mm to 500 mm. The rotation of the table is motorized, activated by the pedal and with adjustable speed; the movement of ascent / descent coil is manual with reel holder counterweighted. The machine is equipped with the compressed air device by drive via lever valve for centering and locking of the wheels, consisting of two jaws which are installed on the expansion of extractable pins. To lock and unlock the tires is sufficient to drive the valve lever. The group expansion is raised by about 150 mm. from the plane table.

TF 6540 FA SHRINK WRAPPER MACHINE WITH PNEUMATIC PUSHER TF 6540 FA semiautomatic sleeve sealing machine with pneumatic pusher suitable for shrink packing both single object and combined. Shrink packing machine is used in many industrial sectors such as printing, pharmacy, floor, beverage, beer etc. and it’s suitable for all kinds of shrink films such as PVC, POF, PP, PE etc The machine is equipped with motorized reel holder and stabilizer plate for light parcels. After the process of sealing & cutting, the products enter the shrink tunnel BS 5540 M automatically.

Cut-to-length lines for T-shaped panels Slitting and recoiling lines with automatic separators positioning Dedicated plants for pre-painted,? film-coated or other special materials (stucco-design, mesh, ground surfaces…) Special lines for panels production, with punching, shearing, roll-forming and bending Continuous punching lines Spool recoiling lines De-burring lines Combined lines with partial cut, where a part of the strip is recoiled for future use Machines for mass production or very flexible plants for small productions Cut-to-length and recoiling lines, with coils packaging stations. Customized and very enhanced productions, which integrate the sheet-metal processing with rotating turret punching (possibility of up to 24 different tools? a time, even in “multitools” solutions) or fiber laser cut.

Here are the latest news from our Research and Development department. Our customers always care about the minimum detail and try to optimize as much as possible costs and time. Here are some of the latest products developed thanks to them and together with them: Automatic solutions to reduce the number of operators on a line, for instance: AUTOMATICALLY POSITIONED SEPARATORS, for recoiling lines provided of automatic N.C. slitter. They move together with the slitting heads, exploiting the same concept. So, they have the same advantages: the operators are free for other tasks, it is possible to memorize recipes. Special products and needs, for instance:

Combined cut-to-length and recoiling lines, that decoil, straighten, cut and recoil various kinds of sheet metal. They are suitable for coils of sheet-metal of any kind and with max thickness 4 mm. The results are parcels of blanks that can be piled-up with a stacker and recoiled strips of different widths, even obtained by partial cut. Our plants are provided of remote assistance equipment, to guarantee precise and immediate interventions, to modify the software parameters and quickly solve emergencies and stops of the machines.

Each line is carefully designed on the customers indications, starting from a general structure that is as follows: Coil car, motorized and with hydraulic lifting Decoiler, designed on demand and with the required capacity (up to 30 ton) Straightening group with one of the different precision straighteners or levellers we can propose. We have in our range also “cassette-system” levellers, for the quick exchange of the working rolls. They are particularly useful for those who have a big range of materials and thicknesses. Guillotine shear (start-stop or non-stop models) or flying shear. This last one allows the flying cut of the sheet-metal, without stopping or slowing down the passage of the material. The shear moves synchronized with the metal strip. The control equipment checks the material movement and automatically decides, according to the speed, to move the car that holds the shear.

It is a special slitter with Numerical Control, different from all the others available on the market, with a variable number of slitting heads, which include in one single body the upper and lower blades. This allows to easily adjust the clearance between the blades (now also automatically) and to reduce the wearing. The characteristic that makes this slitting group original and extremely efficient is the system of changing the slitting widths, without manual intervention of the operator. The slitter can be managed by N.C., so from the line control-board, by remote control, or even by a PC interfaced to our customized softwares: GA.GE. or GMDesign.

It can be completed by many options (scrap-coilers or scrap-choppers, film or protective paper applicators…) and with devices to help the coils loading and unloading: coils cars, rotating arms, rotating tables for the automatic strapping, magnetic lifting systems, conveyors and so on… They are all studied together with the customers, following his needs and preferences.

Automatic mesh bending machine, equipped with double gearmotor, fast fitting pins. It is equipped with Reinforced framework; Bending pin holder; Adjustable mobile bending bar (minimum length 70 mm); 'KS31' electronic digital programmer which allows adjusting bending angles.