Machine tools - Import export

BENCHTOP EUROHOLE CUTTING MACHINE WITH LEVER FPE1-EURO P The FPE1 EURO-P allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather etc. It is suitable for small productions. The punch is easily replaceable and is equipped with an extractor device in rubber to facilitate the extraction of the waste. The punch is an element subject to wear. Robust steel structure. Simple use.

ELECTRICAL EURO-HOLE CUTTING MACHINE FPE2-EURO E The punching FPE2 EURO-E is a silent machine, fast and safe with a sturdy steel frame and powerful electric motor that allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather, etc., with thickness up to 3 mm. The operation is very simple, once the product is inserted under the punch, the euro-hole can be made by an electric pedal, especially useful in soft material houses and therefore difficult to detect from the sensor, or via switch (product presence sensor) positioned on the head of the punching machine. The punch is an element subject to wear.

MECHANICAL CUTTING MACHINE FPE2-EURO M - EURO-HOLE The FPE2-EURO M die-cutting machine is a simple and safe machine with a sturdy steel structure that allows the realization of a 32 mm hole in cardboard, blister, plastic, leather, etc. with thickness up to 3 mm. The punch is easily replaceable and is equipped with a rubber extractor device to facilitate the extraction of the scrap. Operation is manual by mechanical pedal. The punch is an element subject to wear and must be replaced periodically.

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt.

Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 20 mm (#6). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 140 m/min (460 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick AntiTwist electronic device (Optional) Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit (upper and lower) Pulling with 4 motors and 4 pulling drive wheels Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Prestraightening Feeding Unit (Optional) Automatic motorized wire change (Optional) 3D version for the production of tridimensional pieces.

Stirrup bender and bar shaping machine from coil with 2 bending heads, allows to produce stirrups and shaped wires with bends at both ends using wires up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 160 m/min (525 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit Automatic motorized wire change Automatic adjustable wireguide Web Teleassistance Prestraightening Feeding Unit (Optional).

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 22 mm (#7). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces.

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces.

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Bar Wiser 28 Pack 0 Storage rack pneumatically operated.

Integrated plant to cut and stock precut bars made of fast automatic straighteners with rollers (such as RETA) and coil processing up to Ø 20 mm. Pulling speed up to 300 m/min. The plant is fully customizable and modular thanks to a wide range of available accessories. Fast Coil change patented system of automatic horizontal wire change (Optional); Straighteners (horizontalvertical) with electronic and independent setting for double wire feeding; Cutting with Brushless motors with adjustable wire guide, fixed and mobile cutting blades; Rollers for the extraction of the last part of the coil; Teleassistance.

Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part Operation by means of digital electric servomotors 4 adjustable bending speeds

Fast automatic wire straightening machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4), equipped with Senso Technology.

Fast automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4). Driven by digital electric servomotors. Max pulling speed 240 m/min (790 ft/min) Straighteners (horizontalvertical) with electronic setting Rollers for the extraction of the last part of the coil (Optional) Automatic 5inlets motorized wire change and insertion unit (Optional) Patented motorized horizontal wire change unit which allows to change the diameter and the coil in "Zero time" (Optional) Web Teleassistance

The rotor type wire straightening machine RI 6 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 2,5mm to Ø 6mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market

Mesh welding machine for the production of electrowelded mesh fed by wires. The automatic wire mesh welding machine can manufacture electrowelded mesh from prestraightened wire, both longitudinal and transversal. The mesh maximum width is equal to 1250 mm, the length is variable between 2000 mm and 6000 mm. These electrowelded mesh are used for the production of prefabricated sandwich panels.

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 6 mm (#3). Driven by digital electric servomotors. Max pulling speed 160 m/ min (525 ft/ min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm).

The rotor type wire straightening machine RI 12 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 4mm to Ø 12mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 12/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 12 mm (#3). Driven by digital electric servomotors. Max pulling speed 160 m/ min (525 ft/ min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m).

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 8 mm (0.315 in.). Driven by digital electric servomotors. Max pulling speed 160 m/min (525 ft/min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Fixed cut with automatic backstop length for a maximum cutting flexibility (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m).

STRETCH DRIVE MO is a Cold Rolling and Stretching Line with single horizontal drawing capstan for the production of both smooth and ribbed, colddrawn wire with low carbon content and hot rolled high ductility ribbed wire. Stretching Process Stretch Drive MO 6 16 mm (8 m/s) Cold Rolling Process Stretch Drive MO Cold 1 4,5 12 mm (8 m/s) Stretch Drive MO Cold 2 4 12 mm (8 m/s)

The Combidrive MO is a cold rolling line with single horizontal drawing capstan for the production of smooth and ribbed wires in bars from Ø 4 to Ø 12 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Wire is rolled to reduce the section and if necessary ribbed, then straightened and cut according to the different lengths scheduled. Rotating cut system to ensure continuous production Max. pulling speed (straight bars production) 6 m/s Max. pulling speed (coil production) 8 m/s Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s)

The Coldrive MO is a cold rolling line with single horizontal drawing capstan for the production of smooth and ribbed wires from Ø 4 to Ø 16 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 8 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous vector motor" low consumption, high power User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Multipass line and multiple vertical drawing capstan 2MV 3,4 12 mm (12 m/s) 3MV 3,4 10 mm (16 m/s) 4MV 3 8 mm (16 m/s) “Coldrive” MO with single horizontal drawing capstan MO 4,5 12 mm (8 m/s) MO 4 12 mm (8 m/s)

The “Coldrive” 4MV is a cold rolling line with multiple vertical drawing capstan for the production of smooth and ribbed wires from Ø 3 to Ø 8 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 16 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Multipass line and multiple vertical drawing capstan 2MV 3,4 12 mm (12 m/s) 3MV 3,4 10 mm (16 m/s) “Coldrive” MO with single horizontal drawing capstan MO 4,5 12 mm (8 m/s) MO 4 12 mm (8 m/s) MO 4 16 mm (8 m/s)

The “Coldrive” 3MV is a cold rolling line with multiple vertical drawing capstan for the production of smooth and ribbed wires from Ø 3,4 to Ø 10 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 16 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Multipass line and multiple vertical drawing capstan 2MV 3,4 12 mm (12 m/s) 4MV 3 8 mm (16 m/s) “Coldrive” MO with single horizontal drawing capstan MO 4,5 12 mm (8 m/s) MO 4 12 mm (8 m/s) MO 4 16 mm (8 m/s)

The “Coldrive” 2MV is a cold rolling line with multiple vertical drawing capstan for the production of smooth and ribbed wires from Ø 3,4 to Ø 12 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 12 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Multipass line and multiple vertical drawing capstan 3MV 3,4 10 mm (16 m/s) 4MV 3 8 mm (16 m/s)

The Coldrive MV is a cold rolling line with single vertical drawing capstan for the production of smooth and ribbed wires from Ø 4 to Ø 12 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 12 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Multipass line and multiple vertical drawing capstan 2MV 3,4 12 mm (12 m/s) 3MV 3,4 10 mm (16 m/s) 4MV 3 8 mm (16 m/s) “Coldrive” MO with single horizontal drawing capstan MO 4,5 12 mm (8 m/s) MO 4 12 mm (8 m/s) MO 4 16 mm (8 m/s)

Ring bending machine for rings of unlimited radius (rib rings) and spirals. Driven by a variablespeed electric motor min 20; max 30 rpm. Adjustable bending radius from a minimum 15 cm (with small diameters) and over. For Ø 6 mm (#3) Ø 32 mm (#10) wires.

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 45 mm (#14) Plate revolving speed 5÷12 RPM Equipped with electronic programmer up to 50 bends

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 36 mm (#11) Plate revolving speed 8 RPM