Inserts - Import export

PALLET 1000X1200 mm - TECHNICAL MANUAL - NESTABLE AND RUNNERS Plastic pallets made of recyclable black RPE suitable for technical use. They are light and easy to handle and are divided into pallets for light, medium and heavy loads. Available in standard type, with edge and with runners Versions: My-L/N pallets for light loads: with square mesh, light, resistant, usable as disposable pallets (L) or for intensive use (N); My-A pallets for medium loads: with a honeycomb mesh, strengthened and strengthened, they are ideal for intensive use; My-E pallets for heavy loads: built with a platform and sleepers made of a single body. They can be equipped with steel bars that can be inserted into the sleepers to reinforce the structure, especially when used in automated transport and storage systems (RACKING).

Lifting platform single pantograph with U or E profile (FPHU/FPHE 1000) for the insertion of the pallet. On request it is possible to make a modification to the platform transforming the profile from U to E in order to have a central support for the pallet. This variant guarantees the lifting of heavy pallets without risk of flexing. For correct operation of the platform the load must be distributed evenly regardless of the type of profile in use. Features: Structure in high thickness sheet steel Construction according to European safety standards Electrohydraulic control unit externally positioned Keypad with protection IP 54 positioned on the hydraulic power pack Security aluminium perimeter on the upper platform Hydraulic power unit designed for intermittent use by 30%. Hand control with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with fall arrest-valve in case of breakage of the pipes

The paper hand towels are available in different versions. Center feed rolls, perfect to be inserted in the special dispensers, kitchen towels or traditional rolls with perforated sheets. The two-ply cellulose of the center feed rolls is microembossed, it's soft and fluffy, perfect for drying your hands. The paper of the wiping rolls can be either embossed or smooth, in both cases, they are also available with the recycled paper. This wide range is designed to meet all needs, not only to dry hands, but for all uses as well.

Available size: from DN300-12″ up to DN3000-120″

The single size installation tool for UNF helicoil thread inserts designed for manual use. Can be used for installation of all types of thread inserts, including those complying with DIN 8140, used in the aeronautics and automotive, and also those with a reduced diameter for general use Specially designed for thread inserts of smaller sizes from 4-48 to 10-32 It has a threaded nose and rod so that the thread when inserted will be guided internally by the thread of the rod and externally by the thread of the nose before and a little bit after This installation tool prevents deformation of thread insert even if the operator exerts too much pressure, ensuring easy and safe installation Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

The FLO-SERT are inserts for plastic with installation during plastic molding Suitable for installation in a wide range of thermoplastics and thermosets Blind bottom prevents plastic inflow inside the insert Unique design with three opposite helical knurled bands, combined with hollow parts, provides very high torque and pull out resistance Also known as FLO-TECH, with equivalent shape, features and dimensions

The HEAT-SERT are inserts for plastic with heat/ultrasonic installation into cylindrical holes Suitable for all types of thermoplastics Designed for installation in notch-sensitive amorphous thermoplastic materials. The rounded knurling reduces stress on the contact surface while avoiding stress on the material in which it is inserted Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet They are available in unheaded and headed (flanged) versions. Headed (flanged) version provides bearing surface for the mating component to prevent jack-out. Also a screw can be inserted on the opposite side of the flange, allowing to achieve very high pull-out resistance. It also ensures a large contact area, which is useful for electrical contacts and specific applications Unheaded inserts in addition are symmetrical so they do not need to be oriented during installation process

The TECH-SERT are inserts for plastic with heat/ultrasonic installation into cylindrical holes Suitable for all types of thermoplastics They feature a unique combination of helical knurls with opposite directions and knurled flanges, which substantially increase torque and pull-out resistance, even compared to the SONIC-SERT inserts Installation is simplified by the symmetrical nature of the insert, eliminating the need for orientation during automated or manual feeding Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet Also known as TECH-SONIC, with equivalent shape, features and dimensions

The S29, S30 (Short version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes In the short version these inserts offer the advantage of having reduced dimensions, shorter installation times and lower costs. On the other hand, the resistance to torque and pull out loads is reduced comparing to long version Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates These inserts were designed to provide faster speed and ease of installation, and at the same time maximize torque and pull out performance. The outer profile was made symmetrical with respect to length, so that the insert does not have to be oriented during the installation process. These inserts are therefore suitable for automatic type installations in large volume The S29, S30 offer much higher torque and pull-out resistance than all other inserts Holes sizes are identical to those of the S19 and S20 inserts to provide an easy alternative

The S29, S30 (Long version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes These are the longer versions of the S29, S30 inserts for higher torque and pull-out resistance Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates These inserts were designed to provide faster speed and ease of installation, and at the same time maximize torque and pull out performance. The outer profile was made symmetrical with respect to length, so that the insert does not have to be oriented during the installation process. These inserts are therefore suitable for automatic type installations in large volume The S29, S30 offer much higher torque and pull-out resistance than all other inserts Holes sizes are identical to those of the S19 and S20 inserts to provide an easy alternative

The SONIC-SERT are inserts for plastic with heat/ultrasonic installation into cylindrical holes Suitable for all types of thermoplastics They are designed for quick and economical installation Opposing knurls of the insert offer high torque and pull out performance Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet Also known as SONIC-LOK, with equivalent shape, features and dimensions

The S19, S20 (Short version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes In the short version these inserts offer the advantage of having reduced dimensions, shorter installation times and lower costs. On the other hand, the resistance to torque and pull out loads is reduced comparing to long version Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The S19, S20 inserts are designed with a wide center knurl coupled with two smaller knurls and deep undercuts on both ends to maximize torque and pull out performance They induce very low radial stresses and are therefore particularly recommended in holes with thin walls. In this case the hole must be a bit wider. Optimal size should be determined after appropriate practical tests Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet

The S19, S20 (Long version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes These are the longer versions of the S19, S20 Short inserts for higher torque and pull-out resistance Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The S19, S20 inserts are designed with a wide center knurl coupled with two smaller knurls and deep undercuts on both ends to maximize torque and pull out performance They induce very low radial stresses and are therefore particularly recommended in holes with thin walls. In this case the hole must be a bit wider. Optimal size should be determined after appropriate practical tests Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet

The S14 (Short version) are inserts for plastic with heat/ultrasonic installation into tapered holes with an 8° angle In the short version these inserts offer the advantage of having reduced dimensions, shorter installation times and lower costs. On the other hand, the resistance to torque and pull out loads is reduced comparing to long version Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The tapered form facilitates proper seating and maximizes the surface contact between the insert and hole wall prior to the application of heat or ultrasonic vibration. These inserts are the best choice when using ultrasonic insertion techniques The insert's straight-toothed upper ring and oblique-toothed middle ring provide high torque and pull out resistance, ensuring complete filling of the plastic material in the cavities below Installation must be carried out using heat conduction or ultrasonic machines.

The S14 (Long version) are inserts for plastic with heat/ultrasonic installation into tapered holes with an 8° angle These are the longer versions of the S14 Short inserts for higher torque and pull-out resistance Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The tapered form facilitates proper seating and maximizes the surface contact between the insert and hole wall prior to the application of heat or ultrasonic vibration. These inserts are the best choice when using ultrasonic insertion techniques The insert's straight-toothed upper ring and oblique-toothed middle ring provide high torque and pull out resistance, ensuring complete filling of the plastic material in the cavities below Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet Inch version from 2-56 to 5/16-18 is available upon request

The PRESS-SERT are press-in expansion inserts to be installed into cylindrical holes Suitable for applications in thermoplastic materials The combination of flat and knurled areas ensure high torque and pull out performance normally achievable only with inserts that are installed by a hot/ultrasonic process These inserts are installed by simple pressure, without need for special equipment Also known as PRESS-LOK, with equivalent shape, features and dimensions

The S50, S51 are press-in inserts to be installed into cylindrical holes Suitable for soft thermoplastics The helical knurl of the outer surface is specially designed to facilitate insertion by allowing maximum plastic sliding of the material in the serration grooves They allow easy and low-cost assembly, as no special machinery is required Offer moderate pull-out and good torque resistance They are available in unheaded S50, and headed (flanged) S51 versions. Headed (flanged) version provides bearing surface for the mating component to prevent jack-out. In the S51 a screw can be inserted on the opposite side of the flange, allowing to achieve very high pull-out resistance. It also ensures a large contact area, which is useful for electrical contacts and specific applications The S50 in addition are symmetrical so they do not need to be oriented during installation process.

The THREAD-SERT are self-tapping inserts to be installed into cylindrical holes Suitable for installation in a wide range of thermoplastics and thermosets They are particularly designed for applications that may involve a high tensile load Very easy installation, also using a simple screwdriver Available in two versions with o without head. Headed (flanged) version provides bearing surface for the mating component to prevent jack-out. This feature is also useful in applications with electrical contacts Also known as SCREW-SERT, with equivalent shape, features and dimensions

The S10 are self-tapping thread forming inserts to be installed into cylindrical holes Best suited for ductile, softer thermoplastics or thermosets They provide the best pull-out resistance for a post-mold installed inserts Very easy installation, also using a simple screwdriver Symmetrical shape, they do not need to be oriented during installation process, thus can also be easily used in automatic systems Inch versions from 4-40 to 1/4-20 also are available on request

Keensert high-strength threaded inserts enter in pre-threaded holes and are secured via their locking keys. In High duty series they have 2 or 4 locking keys (depending from diameter) which once positioned make the insert mechanically locked against unscrewing from rotation or vibrations. Keenserts are extremely robust, have high resistance to rotation and extraction, a very precise thread and are easy to install and remove. They are widely used in sectors such as mechanics or precision engineering, aeronautics and aerospace on light alloys, steel or cast iron. They can also be used in damaged threads in expensive components. The Keensert inserts are supplied with the locking keys already positioned inside the grooves. The pre-positioned keys ensure that by screwing the insert it automatically positions itself at the correct installation depth. Keenserts are installed using special Keenest installation tool.

Keensert high-strength threaded inserts enter in pre-threaded holes and are secured via their locking keys. In Light duty series they have 2 or 4 locking keys(depending from diameter) which once positioned make the insert mechanically locked against unscrewing from rotation or vibrations. Keenserts are extremely robust, have high resistance to rotation and extraction, a very precise thread and are easy to install and remove. They are widely used in sectors such as mechanics or precision engineering, aeronautics and aerospace on light alloys, steel or cast iron. They can also be used in damaged threads in expensive components. The Keensert inserts are supplied with the locking keys already positioned inside the grooves. The pre-positioned keys ensure that by screwing the insert it automatically positions itself at the correct installation depth. Keenserts are installed using special Keenest installation tool. As standard, Keenserts in LIGHT duty series are supplied in:

Keensert high-strength threaded inserts enter in pre-threaded holes and are secured via their locking keys. In Micro series they have 2 locking keys which once positioned make the insert mechanically locked against unscrewing from rotation or vibrations. Keenserts are extremely robust, have high resistance to rotation and extraction, a very precise thread and are easy to install and remove. They are widely used in sectors such as mechanics or precision engineering, aeronautics and aerospace on light alloys, steel or cast iron. They can also be used in damaged threads in expensive components. The Keensert inserts are supplied with the locking keys already positioned inside the grooves. The pre-positioned keys ensure that by screwing the insert it automatically positions itself at the correct installation depth. Keenserts are installed using special Keenest installation tool. As standard, Keenserts in MICRO series are

Self-tapping insert installation tool for all types of self-tapping threaded inserts (with cutting slots Ensat 302, with cutting holes Ensat 307 and Ensat 308) and in different materials (galvanized steel, stainless steel, brass, plastic) For machine use Depth of grip adjustable with bushing Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Self-tapping insert installation tool for all types of self-tapping threaded inserts (with cutting slots Ensat 302, with cutting holes Ensat 307 and Ensat 308) and in different materials (galvanized steel, stainless steel, brass, plastic) For manual use Depth of grip adjustable with bushing Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

High quality zinc plated steel self-tapping ensat thread inserts. Made of galvanized steel, conforming to RoHS, this ensures excellent wear and corrosion resistance Short version with three cutting holes, Ensat 307 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Also Ensat 307 inserts are shorter than Ensat 308 and therefore ideal on thinner materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).

High quality brass self-tapping ensat thread inserts. Particularly suitable for light metals and all types of plastics, both thermoplastics and thermosets This is the most popular model of self-tapping inserts with two cutting slots in the conical end part of the insert. Due to the cutting slots, the thread inserts remain anchored in the material even under strong shocks or vibrations. Suitable for most applications. Ensat 302 standard These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material Made in the EU.

The tool for fast installation of large numbers of generally used small diameter Helicoil thread inserts It is the threaded spindle, that can be used manually or with any eletric scrwedriver. We suggest the Spiralock cordless programmable screwdriver, available in our catalog The threaded spindle guides the thread insert to the established depth, limited by the special ring Attention, this tool is not suitable for mounting DIN standard thread inserts, only those with a reduced diameter Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

The single size installation tool for UNF helicoil thread inserts designed for manual use. Can be used for installation of all types of thread inserts, including those complying with DIN 8140, used in the aeronautics and automotive, and also those with a reduced diameter for general use It is the most popular installation tool, the same contained in the Thread Repair Kits The threaded nose prepares the helicoil thread insert to the size of the thread, making installation simple and safe. It also allows installation in difficult areas, without use of the other hand to hold the insert Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and selftapping bushes, which have always been recognized by the market as products of excellent quality

The tool for fast installation of large numbers of generally used small diameter Helicoil thread inserts It is the threaded spindle, that can be used manually or with any eletric scrwedriver. We suggest the Spiralock cordless programmable screwdriver, available in our catalog The threaded spindle guides the thread insert to the established depth, limited by the special ring Attention, this tool is not suitable for mounting DIN standard thread inserts, only those with a reduced diameter Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality