Industrial system - Import export

The flow of oil and water is introduced to the tank and distributed in a homogeneous way across the whole cross-section. They are composed of a containment tank which can be manufacturedfrom treated and painted carbon steel or AISI 304 stainless steel; lamellar pack with parallel channels in rigid polystyrene, stabilized agains UV radiation. Special materials and executions are available on request. Typical applications: first fall rain water, petrochemical plants, mechanical workshops, refineries and depots of hydrocarbons, washing of vehicles, land reclaim, refuse handling centres. -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

The standard model is made with wetted parts manufactured in AISI 304, the support legs in treated and painted carbon steel, filter element of quartz sand of suitable grain size. Special executions and alternative materials are available on request. Typical applications: tertiary treatment of civil and industrial waste water, surface water clarification, treatment of drinking water, primary filtration of civil and industrial waste water, clarification of metallurgical industry cooling water, algae removal, pre-treatment for ultra-filtration membrane installations, pre-treatment for ozonisation plants, finishing treatment with active carbon. - Low first costs and plant management costs - High efficiency and reliability for the removal of suspended solids, even colloidal - Exclusive backwash system which uses raw water rather then filtered water - External sand recirculation system - Ease of installation Possibility of gravity feed, thanks to its low pressure drops

The flow of water and sludge coming from the previous phases of treatment (whether biological or physical-chemical) is introduced into the intermediate zone of the tank, just below the lamellar pack. Lamellar pack single-piece clarifiers for the sludge settling. They are composed of: containment tank which can be manufactured from, at choice, treated and paintedcarbon steel or in AISI 304 stainless steel; lamellar pack with parallel channels in rigid polystyrene, stabilized against UV radiation; surface discharge trough (with weir) in AISI 304; intermediate distributor of the feed flow. Special materials and executions are available on request. FM – L SERIES (11,30 m2/m3 equivalent surface) Typical applications: secondary clarification of biological sludge, drinking water plants, upgrading of existing clarifiers, rain water treatment. -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

The flow of water and sludge coming from the previous phases of treatment (whether biological or physical-chemical) is introduced into the intermediate zone of the tank, just below the lamellar pack. Lamellar packs with frame for sludge removal. They are composed of the parallel channel lamellar pack in rigid polystyrene, stabilized against UV radiation, closedin an AISI 304 containment frame; they are normally employed for the upgrading of existing clarifiers or for housing in concrete tanks specifically built for the purpose of holding lamellar packs. F – L SERIES (equivalent surface 11,30 m2/m3) F – I SERIES (equivalent surface 14,90 m2/m3) F – S SERIES (equivalent surface 20,00 m2/m3) -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

The advantages of cloth filters and biorulli in a compact system for small community water treatment. Compact system for the biological purification treatment with biodiscs combined with cloth filter for the separation of excess sludge. The biocombi compact system features two treatment phases (biological treatment and separation of excess sludge) gathered in a single tank. The standard model provides the complete provision of a carbon steel tank treated and painted with a fiberglass modular cover easily removable, and an electrical switchboard on the machine with IP 55 protection. The moving parts (disc roller and drum filter) are actuated by a single geared motor with power included between 1,10 and 1,50 kW. -Minimum energy consumption -Reduced maintenance -Easy accessibility -Increased floor space (compact construction)

The advantages of cloth filters and biorulli in a compact system for small community water treatment. Compact system for the biological purification treatment with biodiscs combined with cloth filter for the separation of excess sludge. The biocombi compact system features two treatment phases (biological treatment and separation of excess sludge) gathered in a single tank. The standard model provides the complete provision of a carbon steel tank treated and painted with a fiberglass modular cover easily removable, and an electrical switchboard on the machine with IP 55 protection. The moving parts (disc roller and drum filter) are actuated by a single geared motor with power included between 0,75 and 1,10 kW. -Minimum energy consumption -Reduced maintenance -Easy accessibility -Increased floor space (compact construction)

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. B290 is the series of the largest units, used for plants of significant size. The transport of these rotating contactors is of the special category, but still at acceptable costs (it does non necessitate police escort). Typical applications: medium-sized communities and large factories. -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. B240 is one of the most recent series, designed to optimise the experiences acquired with the other types. It offers a range of medium to high active surfaces whilst being of limited size which facilitates their handling and installation. The series is already favoured in various installations, both civil and industrial. -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. B200 is the most used series, considering that it was the first to be launched and manufactured 40 years ago. It covers the size of plant in which the advantages of the biorulli® system are most evident. Typical applications: from small to medium-sized communities with seasonal variations in the number of inhabitants. -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. This is the latest entry to the single-piece unit series. The tank is made from treated and painted carbon steel, the cover in fibreglass-reinforced polyester. It associates the advantages of a single-piece unit (simplicity of installation, limited civil engineering works) with the possibility of application in installations already of a considerable size. The transport of these single-piece units is of the special category, but still at acceptable costs (it does not need a police escort). Typical applications: small to medium-sized communities various types of industry -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The tertiary filtration is strongly influenced by the hydraulic profile of the plant, which often cannot be changed. In the PECV VM (VM = metal tank) disc filters series the collection shaft is placed vertically. The goal is to feed equipment completely submerged even with very low hydraulic profiles. Even for this series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PECV VM solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 10.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the TF – TV VM (VM = metal tank) series the cloth support is made of a perforated metal sheet drum. This model is used for wastewater treatment plants of small working capacity (up to 2.000 PE) or as a secondary treatment downstream from immobilized biomass systems. It is available for installation in concrete tanks or metal tanks versions. The equipment is supplied with an electrical switchboard. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

Washing machine for external cleaning of glass bottles and jars. The Lab-10 model is designed for integration into bottling lines with productions of up to 1200 bottles/hour (for higher productions, other models are available up to 10,000 bottles/hour). Thanks to its integrated traction motor and compact dimensions, its installation is simple and possible in any condition. The machine is equipped with a series of devices for the thorough washing of all parts of the bottle: - Adjustable-height upper brush for cap washing - Lower brush for bottom cleaning - High-speed rotating central vertical brush for washing the entire bottle surface Once the bottle washing is completed, two stainless steel blowing blades, powered by a high-pressure fan, ensure the drying of the entire surface for labeling.

Automatic rinsers respectively with 4 and 6 positions operate using a water injection system with continuous flow. An optional recirculation kit with an integrated filtration system allows the use of a sterilizing or rinsing solution. An 'air blowing' version is also available. These machines allow the internal rinsing of new containers before filling, without wetting the exterior, using water previously filtered through a 0.35µm filtration cartridge. They do not require equipment for additional formats: format change is achieved through a few simple adjustments. The machines are entirely constructed in AISI 304 Stainless Steel and with plastic materials compliant with relevant directives. Machines provided in this manner are ready for integration into bottling or food packaging lines. Production: 800 bottles/hour for 4 positions - 1500 bottles/hour for 6 positions.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The PPC – PPC VM (VM = metal tank) series was developed for plants with medium-large potential. For filters in this range, cloth washing is done with two pumps only (of which one backup pump) which serveall the discs. The selection of discs on which to conduct the backwash (in sequence) is carried out by using double-acting valves with pneumatic control. The largest standard model in this series has a filtering surface of 160 m2 that can process a load equal to a community of approximately 50.000 PE. A singular feature of this series is the low energy consumption, even more noticeable with the increasing plant potential. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength.

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. M115 is the smallest single-piece unit series. It involves a set of rotating discs complete with tank and cover, both manufactured from fibreglass-reinforced polyester. It is an economical version, easy to install. Typical applications: apartment blocks villas small campsites factory premises -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. This is the most widely used single-piece unit series. The tank can be made, at choice, in treated and painted carbon steel or in AISI 304 stainless steel. The cover, in both cases, is manufactured in fibreglass-reinforced polyester. It is noteworthy for the ease of installation (limited civil engineering works, factory-assembled unit). Typical applications: hotel villages small communities various types of industry -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

Mitadaf is an innovative dissolved air flotation system. Its exceptional solid/liquid separation and/or sludge thickening efficiency is the result of the combined systemof uniform hydrodynamics and filtration with a bed of micro air-bubbles: an equipment of new concept developed by MITA. The heart of the mitadaf system is the multifunctional central column, by means of which the raw sewage is introduced into the tank, the clarified effluent water is recovered and the sludge exits. The raw influent water, suitably saturated with air, is introduced into the flotation tank via a series of holes located in the lower part of the central column. The entering mix, propelled by the micro-bubbles of air, immediately reaches the surface, homogeneously distributed across the whole flotation area (uniform hydrodynamic system).

The REVO PN unit is designed to handle applications with multiple zones. This enhanced unit, thanks to a particular algorithm, minimizes your energy costs through the synchronization and the power limit for each zone. Revo PN keeps your instantaneous power within the limits of your electricity supply contract. This product meets modern connectivity needs REVO PN responds to the modern need for connectivity, data acquisition, monitoring and diagnostics of industrial plants through the most widely used field bus systems.It’s the ideal complement to your PLC / MULTILOOP for improved power control. EACH ZONE INCLUDE: • Power managements • Current Measurements in True Effective Value • Power measurements • Voltage measurements • Load resistance measurement • Communication • Thyristor Units with high I2T • Synchronizing Circuit • 480V Max Voltage • Digital Input and Relay Output • Integrated Extra Rapid fuse

With timeliness and professionalism we provide assembly and maintenance services for electrical systems. Our qualified, up-to-date engineers are available to design, manufacture and adjust any kind of electricity system, from residential and civil systems to industrial ones. The company offers: Design and construction of electrical systems for industrial machines and production lines. Design and construction of civil electrical installations Production of subcontracted electrical systems Civil and industrial electrical systems maintenance Video surveillance Anti-theft systems Gate automation Home automation systems Lighting

Gripple is universally recognised as the most efficient means of attaching suspended loads. Gripple is used to secure, hold and install Conduits for electrical industrial systems Ducts for air conditioning and ventilation Signage and equipment for shops and shop windows Panels for cold storage Earthquakeresistant structures Other suspended service facilities

Sliding Head Lathes Parts and Components Machining of Parts and Components made to drawing from ferrous and non ferrous materials (plastics) - CNC machined parts and components made by milling and turning with machine centers and multi axix sliding head CNC lathes from alluminium, steel, plastics ecc. Application: all sectors of the industry – systems, appliances, machineries and devices components

CNC machined parts and components made by milling and turning with machine centers and multi axix sliding head CNC lathes from alluminium, steel, plastics ecc. Application: oil and gas industry sector – systems, appliances and devices components

Recently a new deionization technology, the continuous electro-deionization has been developed, which is a combination of electro-dialysis and ion exchange. It is obtained by a process, which deionized water while the resins are continuously regenerated by means of the electric current inside the unit. This electrochemical regeneration replaces the traditional chemical regeneration of ion exchange systems. The electro-deionization module must be supplied with pre-treated water with reverse osmosis: By combining these two techniques is obtained ultrapure water (0.1-0.2 mS / cm), starting from the drinking water.

Ionic exchange polymers, when in touch with a solution containing salt compounds (i.e. ions), exchange certain ions with other ions having the same electric charge. In particular, potassium ions can be exchanged with hydrogen ions which will create a new tartaric acid molecule. Moreover, other ions, such as calcium, iron and copper, are partially exchanged. This treatment lowers the pH giving added protection against bacterial attacks (for example rettanomyces) which could generate anomalous fermentations.

SAFETY SYSTEM AND ADVANCED SOLUTIONS: - Safety access control with key removal systems; - CCTV systems grant high safety standards and a constant and effective production control; - Integration between SCADA screens and real-time images of the plant; - Continuous recording with play-back option; - Camera system also on wireless technology and fiber optic; - Historical and Analysis with trend systems; - Material shape detection devices.

AIC – Automazioni Industriali Capitanio is a global system integrator providing advanced and tailored automation and robotic solutions for the steel industry, with the aim to continuously improve both efficiency, competitiveness and safety of the production processes. With more than 1000 applications worldwide and more than 40 years of history, AIC can boost an unique experience in both greenfield and revamping projects in meltshops, continuous casting machines and long products rolling mills. Thanks to the team of over 70 highly skilled professionals, the company designs, manufactures and commissions turn-key electrical, automation, PLC safety systems and robotic applications, ensuring long-time experience and technical know-how for engineering, AC and DC drives, PLC and SCADA for complete Levels 0, 1 and 2 automation and process control that are the critical issues of Mini Mills. For more information please visit the website www.aicnet.it or send us an email at aic@aicnet.