Results for
MITA COOLING TECHNOLOGIES
Italy
MITA offers different configurations of air-cooled or water-cooled industrial process chillers: all equipped with electronic microprocessor for setting and displaying the outlet liquid temperatures and all suitable for Industry 4.0. Some advantages of industrial process chillers. - Autonomous unit, with air condensation. - Maximum reliability and performance proven by strict internal tests. - Customizations and flexibility Up to 80% of energy savings in the versions with free cooling system.
Request for a quoteMITA COOLING TECHNOLOGIES
Italy
Performance, savings and environmental sustainability thanks to a patented Plug & Play subcooler for refrigeration systems working with R744 (CO2) and fluorinated refrigerants (HCFC, HFC, HFO).
Request for a quoteFRIGOFLUID S.R.L.
Italy
Remanufacturing is a 'hot topic' in industrial production, especially in times of resource rationalisation: Frigofluid can supply its customers with remanufactured chillers. A totally sustainable solution. Retrofitting a refrigeration system is recommended by industrial consultants to recover lost efficiency at a lower cost than acquiring a new solution Remanufacturing and retrofitting to reduce the use of resources and waste for disposal.
Request for a quoteFRIGOFLUID S.R.L.
Italy
Liquid chillers for low temperatures, also in outdoor environments The RW CW series of process fluid coolers (water, water/antifreeze) are water-cooled and operate with environmentally friendly gas compression. They allow cooled liquid temperatures between -8°C and +20°C. In standard design, ambient temperatures of up to +40°C are permissible, but in the “RW ax/HTA” version even higher ambient temperatures can be achieved. IP54 degree of protection as standard, allowing outdoor installation without a protective roof.
Request for a quoteFRIGOFLUID S.R.L.
Italy
ERW ax systems for industrial refrigeration of process fluids (water, water and glycol) are air-cooled units, using EC (Electronic Control) axial fans. This range includes a series of models with cooling capacities from 2.1 kWf up to 595 kWf. Three different versions are provided for different outlet fluid temperature ranges, agreed with the customer during the design phase. The entire range uses refrigerant with GWP 631.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FRIGOFLUID S.R.L.
Italy
Low outlet fluid temperatures (water or water and glycol, down to -8°C) characterize RW ax LT liquid chillers: air condensation ensures that they use are electrical energy, and not water, for their operation: a resource that is then optimized by the electronically controlled “brushless” type axial fans. Up to +40°C ambient temperature allowed in standard execution.
Request for a quoteFRIGOFLUID S.R.L.
Italy
RW ax systems for industrial refrigeration of process fluids (water, water and glycol) are air-cooled: the only resource used is therefore electrical energy, a decisive advantage in contexts where it is advisable to save water (because of its cost or scarcity). The IP54-grade machine protection (against dust and other agents) facilitates their installation in outdoor environments, which is also possible at temperatures up to +40°C and above, at the customer’s request. RW ax liquid chillers from Frigofluid are suitable for achieving average fluid outlet temperatures (between +1°C and 20°C), with excellent control of the resources used for their operation.
Request for a quoteFRIGOFLUID S.R.L.
Italy
A refrigeration system is more than a single chiller: heat exchangers, hydraulic connections, additional cooling devices also come into play to support your production process.
Request for a quoteSTEFANI SPA
Italy
Our company has been manufacturing finned coil heat exchangers for over 40 years. The design of each finned pack can be totally developed inhouse by Stefani or taken from a drawing supplied by our customer. This is possible thanks to a strategic coengineering service, which is necessary especially when developing specific designs. In the design and manufacture of our finned coil heat exchangers we put all the flexibility and competence that have always been the hallmark of our work. We make customised finned packs for production in batches, dedicated to the machines of our OEM customers and, in general, to data centres, air treatment units for industrial refrigeration, industrial and commercial air conditions and condensing units for refrigeration.
Request for a quoteSTEFANI SPA
Italy
SCIROCCO W is the new tabletype dry cooler for refrigeration, conditioning and industrial process applications.
Request for a quoteSTEFANI SPA
Italy
SCIROCCO C is the new tabletype condenser for refrigeration, conditioning and industrial process applications.
Request for a quoteSTEFANI SPA
Italy
GRECALE was created with various types of industrial refrigeration applications in mind. Thanks to a very wide range, GRECALE meets the needs of installers who need the maximum technical and economic competitiveness. The new series has uncompromising structural quality and a highperformance exchange core, it is rich in configurations and accessories and has been optimised to increase space for goods in the cold store. For consumption efficiency, the version with hot gas and water defrosting is available, even for low temperature cold stores.
Request for a quoteMITA COOLING TECHNOLOGIES
Italy
Compact, efficient and easily accessible: MCE industrial condenser ensures refrigeration operators all the operating standards of its own technology class. The typical MITA evaporative coolers’ durability over time is a plus. MCE-EC version available with electronically controlled fans.
Request for a quoteTAMA AERNOVA SRL
Italy
Data sheet Product Thanks to their reduced dimensions, ease of use and functioning efficiency, EXPLORER filters represent the real solution to the problems of aspiration and filtration of fumes deriving from different industrial productions. This model of filter has been designed according to the principles of modern technology and it's addressed to those industrial and handcrafted applications that need an aspiration and filtration system that proves to be easy to install, of reduced dimensions but of great manageability and stability; specifically, it's been developed for field as industrial mechanics and industrial furnaces where oily refrigerating liquids are used. The EXPLORER filters are made of modular panels, varnished with powder paint. They are equipped with coupling flange that allows its installation on the machine and fan with command and lighted control. They are available in the electrostatic version with one or two cells (tandem model) or in the mechanical...
Request for a quoteTAMA AERNOVA SRL
Italy
Data sheet Product Thanks to their reduced dimensions, ease of use and functioning efficiency, the ANTARES 100 filters represent the real solution to the problems of aspiration and filtration of fumes deriving from different industrial productions. This model of filter has been designed according to the principles of modern technology and it's addressed to those industrial and handcrafted applications that need an aspiration and filtration system that proves to be easy to install, of reduced dimensions but of great manageability and stability; specifically, it's been developed for field as industrial mechanics and industrial furnaces where oily refrigerating liquids are used. The ANTARES 100 filters are made of modular panels, varnished with powder paint. They are equipped with coupling flange that allows its installation on the machine and fan with command and lighted control. They are available in the electrostatic version with one or two cells (tandem model) or in the...
Request for a quoteResults for
Industrial refrigerators - Import exportNumber of results
16 ProductsCountries
Company type