Results for
FERPLAST SNC
Italy
Stackable and suitable for forks lift. Available industry version (industrial gray) or food version (RAL 7001). Ideal for textile industry, pharmaceutical industry, metalworking, plastics processing and food industry. Easy to clean, does not absorb smells and humidity. Storable outdoors. Available with feet, runners or wheels. Are movable with pallet trucks and forklift. Approximate weight 17 kg. The bins can be ordered with 4 legs, runners and 4 wheels without brakes. The version with 4 wheels without brake can be transformed into the version with 2 or 4 wheels with brake by purchasing the relative accessory. This is only a surcharge that must be applied to the bins that already has wheels (it cannot be applied to the bins with the feet).
Request for a quoteMIX SRL
Italy
Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable and scalable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Functional design for installation in R&D area Techanical features • Batch size: 1,4 / 3 / 7 / 20 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: AISI 304 / AISI 316 / AISI 316Ti • Discharge door with round profile, building the bottom side of the mixing chamber • Front side inspection door complete with safety electric lock • Electric control panel with inverter for speed variation of the main rotor shaft • Internal finishing with roughness Ra 0.5-0.8 µm
Request for a quoteFRIGOFLUID S.R.L.
Italy
Remanufacturing is a 'hot topic' in industrial production, especially in times of resource rationalisation: Frigofluid can supply its customers with remanufactured chillers. A totally sustainable solution. Retrofitting a refrigeration system is recommended by industrial consultants to recover lost efficiency at a lower cost than acquiring a new solution Remanufacturing and retrofitting to reduce the use of resources and waste for disposal.
Request for a quoteFRIGOFLUID S.R.L.
Italy
Liquid chillers for low temperatures, also in outdoor environments The RW CW series of process fluid coolers (water, water/antifreeze) are water-cooled and operate with environmentally friendly gas compression. They allow cooled liquid temperatures between -8°C and +20°C. In standard design, ambient temperatures of up to +40°C are permissible, but in the “RW ax/HTA” version even higher ambient temperatures can be achieved. IP54 degree of protection as standard, allowing outdoor installation without a protective roof.
Request for a quoteFRIGOFLUID S.R.L.
Italy
ERW ax systems for industrial refrigeration of process fluids (water, water and glycol) are air-cooled units, using EC (Electronic Control) axial fans. This range includes a series of models with cooling capacities from 2.1 kWf up to 595 kWf. Three different versions are provided for different outlet fluid temperature ranges, agreed with the customer during the design phase. The entire range uses refrigerant with GWP 631.
Request for a quoteFRIGOFLUID S.R.L.
Italy
The secret of this system is the combination of the refrigeration section and the free-cooling section depending on the time of day and year: the first mode allowed by these liquid chillers takes advantage of the normal operation of a refrigeration circuit, the second allows cold outside air to be directly conveyed to the fluid to be cooled: maximum efficiency, minimum energy use due to the clear separation between the two sections.
Request for a quoteFRIGOFLUID S.R.L.
Italy
Low outlet fluid temperatures (water or water and glycol, down to -8°C) characterize RW ax LT liquid chillers: air condensation ensures that they use are electrical energy, and not water, for their operation: a resource that is then optimized by the electronically controlled “brushless” type axial fans. Up to +40°C ambient temperature allowed in standard execution.
Request for a quoteFRIGOFLUID S.R.L.
Italy
RW ax systems for industrial refrigeration of process fluids (water, water and glycol) are air-cooled: the only resource used is therefore electrical energy, a decisive advantage in contexts where it is advisable to save water (because of its cost or scarcity). The IP54-grade machine protection (against dust and other agents) facilitates their installation in outdoor environments, which is also possible at temperatures up to +40°C and above, at the customer’s request. RW ax liquid chillers from Frigofluid are suitable for achieving average fluid outlet temperatures (between +1°C and 20°C), with excellent control of the resources used for their operation.
Request for a quoteFRIGOFLUID S.R.L.
Italy
A refrigeration system is more than a single chiller: heat exchangers, hydraulic connections, additional cooling devices also come into play to support your production process.
Request for a quoteMITA COOLING TECHNOLOGIES
Italy
MITA offers different configurations of air-cooled or water-cooled industrial process chillers: all equipped with electronic microprocessor for setting and displaying the outlet liquid temperatures and all suitable for Industry 4.0. Some advantages of industrial process chillers. - Autonomous unit, with air condensation. - Maximum reliability and performance proven by strict internal tests. - Customizations and flexibility Up to 80% of energy savings in the versions with free cooling system.
Request for a quoteMITA COOLING TECHNOLOGIES
Italy
Performance, savings and environmental sustainability thanks to a patented Plug & Play subcooler for refrigeration systems working with R744 (CO2) and fluorinated refrigerants (HCFC, HFC, HFO).
Request for a quoteMITA WATER TECHNOLOGIES
Italy
The standard model is made with wetted parts manufactured in AISI 304, the support legs in treated and painted carbon steel, filter element of quartz sand of suitable grain size. Special executions and alternative materials are available on request. Typical applications: tertiary treatment of civil and industrial waste water, surface water clarification, treatment of drinking water, primary filtration of civil and industrial waste water, clarification of metallurgical industry cooling water, algae removal, pre-treatment for ultra-filtration membrane installations, pre-treatment for ozonisation plants, finishing treatment with active carbon. - Low first costs and plant management costs - High efficiency and reliability for the removal of suspended solids, even colloidal - Exclusive backwash system which uses raw water rather then filtered water - External sand recirculation system - Ease of installation Possibility of gravity feed, thanks to its low pressure drops
Request for a quoteMITA WATER TECHNOLOGIES
Italy
Mitadaf is an innovative dissolved air flotation system. Its exceptional solid/liquid separation and/or sludge thickening efficiency is the result of the combined systemof uniform hydrodynamics and filtration with a bed of micro air-bubbles: an equipment of new concept developed by MITA. The heart of the mitadaf system is the multifunctional central column, by means of which the raw sewage is introduced into the tank, the clarified effluent water is recovered and the sludge exits. The raw influent water, suitably saturated with air, is introduced into the flotation tank via a series of holes located in the lower part of the central column. The entering mix, propelled by the micro-bubbles of air, immediately reaches the surface, homogeneously distributed across the whole flotation area (uniform hydrodynamic system).
Request for a quoteMITA WATER TECHNOLOGIES
Italy
The flow of oil and water is introduced to the tank and distributed in a homogeneous way across the whole cross-section. They are composed of a containment tank which can be manufacturedfrom treated and painted carbon steel or AISI 304 stainless steel; lamellar pack with parallel channels in rigid polystyrene, stabilized agains UV radiation. Special materials and executions are available on request. Typical applications: first fall rain water, petrochemical plants, mechanical workshops, refineries and depots of hydrocarbons, washing of vehicles, land reclaim, refuse handling centres. -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs
Request for a quoteMITA WATER TECHNOLOGIES
Italy
The flow of oil and water is introduced to the tank and distributed in a homogeneous way across the whole cross-section. They are composed of just the parallel channel lamellar pack in rigid polystyrene, stabilized against UV radiation, closed in an AISI 304 containment frame; they are normally employed for housing in concrete tanks specifically built for the purpose of holding lamellar packs. Features Available height: 0,85 m Available widths: from 0,60 m to 2,20 m Available lengths: from 1,00 m to 3,00 m -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs
Request for a quoteMITA WATER TECHNOLOGIES
Italy
The flow of water and sludge coming from the previous phases of treatment (whether biological or physical-chemical) is introduced into the intermediate zone of the tank, just below the lamellar pack. Lamellar pack single-piece clarifiers for the sludge settling. They are composed of: containment tank which can be manufactured from, at choice, treated and paintedcarbon steel or in AISI 304 stainless steel; lamellar pack with parallel channels in rigid polystyrene, stabilized against UV radiation; surface discharge trough (with weir) in AISI 304; intermediate distributor of the feed flow. Special materials and executions are available on request. FM – L SERIES (11,30 m2/m3 equivalent surface) Typical applications: secondary clarification of biological sludge, drinking water plants, upgrading of existing clarifiers, rain water treatment. -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs
Request for a quoteMITA WATER TECHNOLOGIES
Italy
The flow of water and sludge coming from the previous phases of treatment (whether biological or physical-chemical) is introduced into the intermediate zone of the tank, just below the lamellar pack. Lamellar packs with frame for sludge removal. They are composed of the parallel channel lamellar pack in rigid polystyrene, stabilized against UV radiation, closedin an AISI 304 containment frame; they are normally employed for the upgrading of existing clarifiers or for housing in concrete tanks specifically built for the purpose of holding lamellar packs. F – L SERIES (equivalent surface 11,30 m2/m3) F – I SERIES (equivalent surface 14,90 m2/m3) F – S SERIES (equivalent surface 20,00 m2/m3) -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MITA WATER TECHNOLOGIES
Italy
The advantages of cloth filters and biorulli in a compact system for small community water treatment. Compact system for the biological purification treatment with biodiscs combined with cloth filter for the separation of excess sludge. The biocombi compact system features two treatment phases (biological treatment and separation of excess sludge) gathered in a single tank. The standard model provides the complete provision of a carbon steel tank treated and painted with a fiberglass modular cover easily removable, and an electrical switchboard on the machine with IP 55 protection. The moving parts (disc roller and drum filter) are actuated by a single geared motor with power included between 0,75 and 1,10 kW. -Minimum energy consumption -Reduced maintenance -Easy accessibility -Increased floor space (compact construction)
Request for a quoteMITA WATER TECHNOLOGIES
Italy
Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. B290 is the series of the largest units, used for plants of significant size. The transport of these rotating contactors is of the special category, but still at acceptable costs (it does non necessitate police escort). Typical applications: medium-sized communities and large factories. -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs
Request for a quoteMITA WATER TECHNOLOGIES
Italy
Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. B240 is one of the most recent series, designed to optimise the experiences acquired with the other types. It offers a range of medium to high active surfaces whilst being of limited size which facilitates their handling and installation. The series is already favoured in various installations, both civil and industrial. -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs
Request for a quoteMITA WATER TECHNOLOGIES
Italy
Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. B200 is the most used series, considering that it was the first to be launched and manufactured 40 years ago. It covers the size of plant in which the advantages of the biorulli® system are most evident. Typical applications: from small to medium-sized communities with seasonal variations in the number of inhabitants. -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs
Request for a quoteMITA WATER TECHNOLOGIES
Italy
Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. This is the latest entry to the single-piece unit series. The tank is made from treated and painted carbon steel, the cover in fibreglass-reinforced polyester. It associates the advantages of a single-piece unit (simplicity of installation, limited civil engineering works) with the possibility of application in installations already of a considerable size. The transport of these single-piece units is of the special category, but still at acceptable costs (it does not need a police escort). Typical applications: small to medium-sized communities various types of industry -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs
Request for a quoteMITA WATER TECHNOLOGIES
Italy
Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. This is the most widely used single-piece unit series. The tank can be made, at choice, in treated and painted carbon steel or in AISI 304 stainless steel. The cover, in both cases, is manufactured in fibreglass-reinforced polyester. It is noteworthy for the ease of installation (limited civil engineering works, factory-assembled unit). Typical applications: hotel villages small communities various types of industry -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs
Request for a quoteMITA WATER TECHNOLOGIES
Italy
Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. M115 is the smallest single-piece unit series. It involves a set of rotating discs complete with tank and cover, both manufactured from fibreglass-reinforced polyester. It is an economical version, easy to install. Typical applications: apartment blocks villas small campsites factory premises -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs
Request for a quoteMITA WATER TECHNOLOGIES
Italy
The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The tertiary filtration is strongly influenced by the hydraulic profile of the plant, which often cannot be changed. In the PECV VM (VM = metal tank) disc filters series the collection shaft is placed vertically. The goal is to feed equipment completely submerged even with very low hydraulic profiles. Even for this series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PECV VM solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 10.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss.
Request for a quoteMITA WATER TECHNOLOGIES
Italy
The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The PPC – PPC VM (VM = metal tank) series was developed for plants with medium-large potential. For filters in this range, cloth washing is done with two pumps only (of which one backup pump) which serveall the discs. The selection of discs on which to conduct the backwash (in sequence) is carried out by using double-acting valves with pneumatic control. The largest standard model in this series has a filtering surface of 160 m2 that can process a load equal to a community of approximately 50.000 PE. A singular feature of this series is the low energy consumption, even more noticeable with the increasing plant potential. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength.
Request for a quoteMITA WATER TECHNOLOGIES
Italy
The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the TF – TV VM (VM = metal tank) series the cloth support is made of a perforated metal sheet drum. This model is used for wastewater treatment plants of small working capacity (up to 2.000 PE) or as a secondary treatment downstream from immobilized biomass systems. It is available for installation in concrete tanks or metal tanks versions. The equipment is supplied with an electrical switchboard. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).
Request for a quoteSCHNELL SPA
Italy
Four speed dualdirection bar bending machine. It doesn't pull the bars during bending operations. Driven by digital electric servomotors. Industrial PC equipped with touch screen graphic display 8'', which allows Programming stirrups and shapes with up to 30 bends; Adjusting bending angles; Storing up to 100 different shapes.
Request for a quoteMARTIN GROUP SRL
Italy
equipped with back exit belt for retrieving adhesived fabric double heating system with preheating that allows to fuse using temperatures slightly below average “sandwich” also excellent for the most delicate fabrics pressure system with selector of the “OUT” device that allows to thermoadhesive the most delicate fabrics at zero pressure EQUIPPED WITH RETURN BELT: IT ALLOWS TO COLLECT THE FUSED FABRICS IN THE FRONT PART OF THE MACHINE. STACKER MOD. MODULAR SC 2000 - The continuos fusing machines need a fabric retrieval thtough a perfect alignment of the thermoadhesived pieces. The series “OPEN TOP PLER” has been carried out for the rationalization and the implementation of productivity. thoroughly automatic electronic stacker transport with linear rails the stackers are available with 1/2/3/4 discharge tracks function management carried out by PLC full reliability with any fabric counting device of adhesived items on each discharge track instrumental diagnostics on the touch sceens
Request for a quoteResults for
Industrial equipment - Import exportNumber of results
71 ProductsCountries
Company type
Category