Results for
OCV ITALIA
Italy
Owens Corning® Milled Fibers are designed to enhance mechanical properties, increase stiffness, improve dimensional stability, and minimize distortion under elevated temperatures. EXCELLENT DISPERSION & IMPREGNATION Predispersed nature promotes excellent dispersion in the matrix. Shortfiber thermoplastic compounds will show improved melt flow characteristics with shorter input fiber lengths. IMPRESSIVE AESTHETICS Fiber length and excellent distribution qualities provide a homogeneous, highly pigmentable surface with limited fiber prints and good color. ENHANCED PART STRENGTH Glass reinforced parts exhibit improved mechanical properties, modulus and dimensional stability. Powder Relatively freeflowing with a high bulk density for use in formulations requiring very uniform dispersion and short fibers with median fiber lengths typically in the range of 40 110 microns.
Request for a quoteREMER SRL
Italy
(1.370 N/mm2 outside wires and 1.770 N/mm2 inside wires)
Request for a quoteREMER SRL
Italy
(1.370 N/mm2 outside wires and 1.770 N/mm2 inside wires)
Request for a quoteOCV ITALIA
Italy
Windstrand® 2000 features a powerful combination of optimized design and reliability for longer, lighter blades. Windstrand® 2000 delivers high weaving efficiencies. The product allows blades to operate in extreme environments at reduced operating costs. We’re happy to offer Windstrand® 2000 in all regions. Packaging (Standard Reference) Rovings are available in a singleend internalpull package. Each pallet weighs approximately 1 ton. Pallets are stretch wrapped for load stability. All doffs are wrapped with TackPak™ for protection and to aid package runout and transfer. Full doffs are approximately 2021 kg (45 lb.) and they can be packaged in bulk or CreelPak™ format. Standard Package Cylindrical bobbin without tube, Outside Diameter (OD) ±270mm, height 260300mm. Partial bobbins have smaller diameter. Max bobbin weight approximately 21kg. 600 Tex and greater. Bobbin covered by a TackPack™ film. Pallet Size 1150x1150mm, 4 ways entry.
Request for a quoteOCV ITALIA
Italy
Multiaxial reinforcements are fabrics composed of two or more plies, or layers of unidirectional fibers, the optimal reinforcement configuration. Owens Corning redefines multiaxial noncrimp fabric reinforcements.
Request for a quoteOCV ITALIA
Italy
CS1530 Wet Used Chopped glass fiber represents a compelling reinforcement solution through optimizing the wallboard manufacturing process while increasing product performance.STRENGTH Improves flexural strength by +28% and shear strength by +13% vs. unreinforced wallboard. FIRE SAFETY Meets UL 263 and CAN/ULC S101 standards for fire endurance testing. Stable fiber dosage performance in customer vibratory feed systems, leading to improved consistency of fiber content in wallboard. 66% reduced drift in target fiber feed rate over time 50% reduction in fiber feed rate variability over time. (Illustration Improved Stability and Reduced Variability in Fiber Dosage Rate.) The product helps with reduced line downtime, reduced scrap rate and reduced fiber feed maintenance. (Illustration Reduced Fiber Buildup in Vibratory Feed Systems.)
Request for a quoteOCV ITALIA
Italy
9703 wet use chopped strand (WUCS), featuring Advantex® glass fibers, is designed for improved line speeds and product strength in the manufacturing of wetprocess glass veils. Provides strength and durability for construction, home furnishings and asphalt roofing shingles. EXCELLENT TENSILE STRENGTH Desirable veil and wet web strength for demanding construction and enduse products for home furnishings. EFFICIENT PROCESSING Designed to improve wet web strength in nonwovens processing, allowing improved line speed and reduced veil defects. IMPRESSIVE MECHANICAL PROPERTIES Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass, contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass.
Request for a quoteOCV ITALIA
Italy
SE4805 singleend Type 30™ roving is specifically designed as a compelling solution for Compounders seeking increased productivity through improved processing and handling characteristics, and excellent compatibility in Polypropylene LFT applications. IMPROVED MANUFACTURING ECONOMICS Dependable internal and external unwinding process for less downtime. Reduction in fuzz generation relative to competitive reinforcements for easier processing and less downtime for cleanup. MULTIPROCESS COMPATIBLE Suitable for LFTG, DLFT and CFRT processes, pellet manufacturing and choppable to desired length. MECHANICAL PERFORMANCE Optimal adhesion to the Polyolefin resin matrix provides excellent dryasmolded mechanical properties. EXCELLENT IMPREGNATION & DISPERSION All processes show excellent dispersion within the final parts. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass.
Request for a quoteOCV ITALIA
Italy
SE4121 singleend Type 30™ roving represents a compelling solution for Polypropylene Long Fiber Thermoplastics (LFTG and DLFT) applications where excellent mechanical properties and hydrolysis resistance are required. COMPOUNDING LINE EFFICIENCY No catenary and high resistance to fuzz generation equate to low cleanup & high machine efficiencies. MULTIPROCESS COMPATIBLE Suitable for all DLFT and LFTG processes and choppable to desired length. MECHANICAL PERFORMANCE Optimal adhesion to the Polyolefin resin matrix provides excellent dryasmolded mechanical properties and hydrolysis resistance. EXCELLENT IMPREGNATION & DISPERSION Both DLFT and LFTG processes show excellent dispersion within the final parts. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, extends service life compared to standard Eglass.
Request for a quoteOCV ITALIA
Italy
SE4818 Low Odor is specifically designed for excellent processing and handling for LFT (long fiber reinforced thermoplastic) & CFRT (continuous fiber reinforced thermoplastics) PP applications where low odor is required. LOW ODOR VERIFIED SE4818 Low Odor has been proven to meet low odor requirements per OEM test standards for automotive interior composite parts. Test methods include VDA270 German Association of the Automotive Industry, PV3900 Volkswagen SAE standards and testing and the Geely Low Odor test method Q/JLY J1770528D. EXCELLENT PROCESSING No catenary and low fuzz promotes superior processing, enabling higher efficiencies and lower manufacturing costs with less downtime for cleanup. SUPERIOR COMPOSITE STRENGTH Compared to other reinforcements on the market, SE4818 Low Odor offers superior composite tensile , flexural and Impact performance. Providing maximum part strength and long part service life.
Request for a quoteOCV ITALIA
Italy
SE4849 singleend Type 30™ roving represents a compelling solution for Compounders seeking improved productivity through increased line speed, and the potential for higher glass loadings made possible with excellent dispersion. IMPROVED MANUFACTURING ECONOMICS Greater than 50% reduction in fuzz generation relative to competitive reinforcements for easier processing and less downtime for cleanup. SUPERIOR COMPOSITE STRENGTH Increased splice tensile strength improves package to package transfer efficiency. Increased lubricity imparts lower strand tension enabling up to a 40% increase in compounding line speed for reduced manufacturing costs. SUPERIOR GLASS DISPERSION AND INCREASED PART STRENGTH Outstanding compatibility with Polyolefins, enabling better wetout, uniform glass dispersion and potentially higher glass loading. Optimized adhesion to the polymer matrix offering excellent mechanical properties to meet stringent enduse requirements.
Request for a quoteOCV ITALIA
Italy
SE8400 Type 30™ singleend roving is specifically designed for pultrusion processing in applications requiring high electrical resistance. Produced with Advantex®, corrosionresistant ECR glass technology by Owens Corning. Compatible with polyester, vinyl ester and epoxy resins. EFFICIENT PROCESSING Better wetout in polyester, vinyl ester, and epoxy resin, offering fast processing and good glasstoresin bonding, resulting in optimized part production. Good wetout and resin bonding results in excellent visual appearance of parts produced. GOOD MECHANICAL PROPERTIES Low seed glass results in excellent dielectric properties which are ideal for applications requiring high electrical resistance. ADVANCED SERVICE LIFE Advantex® corrosion resistant glass fiber combined with low seed glass is ideal for longterm electrical, physical, and acid resistance, reducing the potential for costly brittle fracture failures in the field.
Request for a quoteOCV ITALIA
Italy
SE1200 singleend Type 30™ roving is a compelling solution designed specifically for knitting and weaving with versatility to work well in filament winding, pultrusion, and LFTP applications. EXCELLENT PROCESSING Smooth runout from lower drag across contact points produces less fuzz, resulting in smoother parts, less cleanup, and improved machine efficiencies. MULTIPROCESS & MULTIRESIN COMPATIBLE Flexibility for use with standard weaving looms, multiaxial knitting machines, filament winding, and pultrusion. FAST WETOUT WITH REDUCED COST Fast, uniform strand wetout leads to higher glass loading and good adhesion, resulting in optimized part production speed which supports increased productivity and betterquality finished parts. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass provides longer service life in applications facing corrosion and possesses high fatigue properties to help qualify for wind energy.
Request for a quoteOCV ITALIA
Italy
Introducing higher performance composites by Owens Corning more modulus, more benefits, more opportunities. This new higher performance glass provides a boost in mechanical properties enhancing part performance or cost optimization through redesign. Reduce the weight of pultruded parts by up to 8% by using higher modulus glass, saving material cost. Improve performance by up to 15% in axial tensile strength for helically wound pipe compared to reference products. The glass can be used in high temperature muffler applications due to an annealing point increase of 25 30°C compared to current products. Higher modulus can enable fiberglass rebar with modulus up to 70 GPa on straight bars. Properties previously unattainable on bent bars can now be achieved. Central strength members can be made 8% lighter, enabling increased fiber optic capacity in the cable. Reduce the weight of parts for automotive applications by up to 9%.
Request for a quoteOCV ITALIA
Italy
790C wet use chopped strand (WUCS), featuring Advantex® glass fibers, is specifically designed for higherfeed rate processes in dry feed applications. EXCELLENT FIRE/FLEXURAL STRENGTH Engineered to provide fire resistance performance and meet regional building codes. Improves flexural strength of wallboards for ease of handling and installation. High strength characteristics to enhance abuse resistant wallboard systems. EFFICIENT PROCESSING Designed to improve higherfeed rate processes where the uniform glass dosage rate and dispersion reduces feed flow variations and causes clumps. ENHANCED GLASS FIBER CHARACTERISTICS Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass.
Request for a quoteOCV ITALIA
Italy
9560 wet use chopped strand (WUCS), featuring Advantex® glass fibers, is specifically engineered to enhance roofing mat and shingle performance. ENHANCED GLASS FIBER CHARACTERISTICS Advantex® glass helps fight corrosion, enhancing service life of both the roofing mat and shingles, as compared to standard Eglass. Boronfree Advantex® glass contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass. EXCELLENT MAT/SHINGLE PERFORMANCE Improved fiber dispersion and hot/wet tensile retention in mat for better cure of mat binders. This results in improved mat tensile and shingle tear strength properties.
Request for a quoteO.M.C. COLLAREDA S.R.L.
Italy
FF can be equipped with slotted or holed baskets and the rotor has a special design.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
OCV ITALIA
Italy
Telestrand™ Flex roving offers a compelling solution for impregnated glass fiber reinforcement (IGFR) used as peripheral reinforcement. It is produced with patented Advantex® corrosionresistant ECR glass by Owens Corning and is available in 600 Tex to 2400 Tex. EXCELLENT PROCESSING Excellent strand integrity with higher LOI. Fast curing helps in running at higher speed. Smooth runout combined with low fuzz properties. ENHANCED PRODUCTIVITY Available in 32 kg doff size. Reduced coating – lower consumption of chemicals for coating. Reduction in wastage and downtime. Helps to increase line speed. Labeling Each individual package is labeled with information including product name, Tex/yield, production plant, production date, and weight (*Taloja). Storage It is recommended to store glass fiber products in a cool, dry area.
Request for a quoteCARBONVENETA TECNOLOGIA NEI COMPOSITI SRL
Italy
Carbon Fiber Rod Ø 30 mm
Request for a quoteCARBONVENETA TECNOLOGIA NEI COMPOSITI SRL
Italy
Carbon Fiber Rod Ø 20 mm
Request for a quoteCARBONVENETA TECNOLOGIA NEI COMPOSITI SRL
Italy
Carbon Fiber Rod Ø 12 mm
Request for a quoteCARBONVENETA TECNOLOGIA NEI COMPOSITI SRL
Italy
Carbon Fiber Rod Ø 10 mm
Request for a quoteCARBONVENETA TECNOLOGIA NEI COMPOSITI SRL
Italy
Carbon Fiber Rod Ø 8 mm
Request for a quoteCARBONVENETA TECNOLOGIA NEI COMPOSITI SRL
Italy
Carbon Fiber Rod Ø 25 mm
Request for a quoteCARBONVENETA TECNOLOGIA NEI COMPOSITI SRL
Italy
Carbon Fiber Tube Ø 15 / 8 mm
Request for a quoteCARBONVENETA TECNOLOGIA NEI COMPOSITI SRL
Italy
Carbon Fiber Rod Ø 15 mm
Request for a quoteCARBONVENETA TECNOLOGIA NEI COMPOSITI SRL
Italy
Carbon Fiber Rod Ø 4.5 mm
Request for a quoteCARBONVENETA TECNOLOGIA NEI COMPOSITI SRL
Italy
Carbon Fiber Rod Ø 5 mm
Request for a quoteResults for
Fiber - Import exportNumber of results
55 ProductsCompany type