Fasteners - Import export

Professional chromed stapler with plastic-covered handle (for insulation). Ideal for fixing to the wall electrical, telephone and television cables, suitable for professionals such as electricians, aerial fitters and harness makers. M 77 for staples series 77 with length of 9,5-11 mm with 6,45 mm width and section 0,60x1,18 suitable for electric and telephone cables with section Ø 5,5 mm. M 88 for staples series 88 with length of 12-14 mm with 8,00 mm width and section 0,60x1,18 suitable for electric and telephone cables with section Ø 6,5 mm.

Steel stapler hammer, with its practical handle is ideal for fixing labels on wooden boxes, to secure your notices, posters, upholsteries and ceilings. Perfectly balanced, it allows mounting in hard to reach places. This model is compatible with staples serie 13 with lenght of 4-6 mm, total width of 10,65 mm, section 0,50x0,75 mm.

Professional manual tackers Rocama 10/20 with body made of aluminum alloy. Loading dock below. Ideal for fixing labels on packaging and protective materials in wood, for assembly of frames and frames for decoration work, to set wallpaper, baseboards and wood profiles, for exhibitions stands, furniture stores, interiors of homes, caravans, campers and coatings of sofas and furniture. Equipped with power regulator. Available in two models: Rocama 10 for staples series AP with length of 5-8-10 mm, with total width 10 mm, section 0,45x0,90 mm. Rocama 20 for staples series AP with length of 10-12-14-16-20 mm, with total width 10 mm, section 0,45x0,90 mm, brads series FAST M of 20 mm and pin series FAST W of 20 mm, section 1,00x1,25.

Trolleys FP with hook fastening barrel and fork holding. FP Trolleys are available in three different models. - Model FP15 - Model with two solid rubber wheels 200mm - Model FP79 - to 300-liter barrels. Model with 3 wheels cushion 260 mm - Model FP36 tippers - Model with 4 solid rubber wheels. FP 15 - CART FOR DRUMS WITH 2 WHEELS Trolley FOR drums FP 15, equipped with a hook fastening for barrel and fork holding.Complies with CE standards.

The self-clinching stud is the modern and rational alternative to the weld-on stud. The stud is easily applied to metal sheets of various thicknesses creating a secure, unequaled-looking attachment with very high strength values. There is almost no damage to the surface of the sheet metal and its treatment This self-clinching stud is part of our line of self-clinching inserts. All Clinch inserts are installed using a simple punch During installation process, the fastener is placed in an appropriately sized hole and then compressed by means of a punch, applyinng only sufficient pressure to squeeze the stud head and its under head tooth features into the parent sheet. The sheet metal experiences plastic deformation and locks the fastener firmly to itself. After installation the spigot joint should be flush with the sheet, so the result is aesthetically perfect. And the tooth locking feature provides high tensile as well as torsional strength

The flush self-clinching nut is a fully concealed element. Indispensable when you want to have the sheet metal completely smooth, free of protrusions on both sides This self-clinching nut is part of our line of self-clinching inserts. All Clinch inserts are installed using a simple punch During installation process, the fastener is placed in an appropriately sized hole and then compressed by means of a punch, applyinng only sufficient pressure to squeeze the nut into the parent sheet. The sheet metal experiences plastic deformation and locks the fastener firmly to itself. After installation the hexagon head should be flush with the sheet and the spigot should not protrude through the opposite side. So the result is aesthetically perfect and hexagon head provides high tensile as well as torsional strength The nut can be mounted on already painted or treated sheet metal as it requires no further processing after installation

This self-clinching broaching nut for plastic materials is widely used in the electronics industry. It offers a threaded hole of high resistance to both torsion and tensile strength This self-clinching nut is part of our line of self-clinching inserts. All Clinch inserts are installed using a simple punch During installation process, the fastener is placed in an appropriately sized hole and then compressed by means of a punch. The parent material experiences plastic deformation and locks the fastener firmly to itself Standard material: Electro tin plated steel and stainless steel

The self clinch standoff is an element in which the head is fully concealed in the sheet metal; it offers high torsion and tensile strength characteristics. The application is so aesthetically sound that no further finishing work is required after installation. It is particularly suitable for the electronics industry This self-clinching standoff is part of our line of self-clinching inserts. All Clinch inserts are installed using a simple punch During installation process, the fastener is placed in an appropriately sized hole and then compressed by means of a punch, applyinng only sufficient pressure to squeeze the hexagon head into the parent sheet. The sheet metal experiences plastic deformation and locks the fastener firmly to itself. After installation the head should be flush with the sheet. So the result is aesthetically perfect and hexagon head provides high tensile as well as torsional strength

This self-clinching broaching standoff for plastic materials is widely used in the electronics industry. It offers a threaded hole of high resistance to both torsion and tensile strength and allows panels to be spaced at the desired distance This self-clinching standoff is part of our line of self-clinching inserts. All Clinch inserts are installed using a simple punch During installation process, the fastener is placed in an appropriately sized hole and then compressed by means of a punch. The parent material experiences plastic deformation and locks the fastener firmly to itself Standard material: Electro tin plated steel and stainless steel

The self clinch standoff is an element in which the head is fully concealed in the sheet metal; it offers high torsion and tensile strength characteristics. The application is so aesthetically sound that no further finishing work is required after installation. It is particularly suitable for the electronics industry This self-clinching standoff is part of our line of self-clinching inserts. All Clinch inserts are installed using a simple punch During installation process, the fastener is placed in an appropriately sized hole and then compressed by means of a punch, applyinng only sufficient pressure to squeeze the hexagon head into the parent sheet. The sheet metal experiences plastic deformation and locks the fastener firmly to itself. After installation the head should be flush with the sheet. So the result is aesthetically perfect and hexagon head provides high tensile as well as torsional strength

The floating self-clinching nut has the special feature of allowing couplings even when there is a misalignment in the holes of the coupled objects. It is degned in two different versions: with a normal threaded hole and with a self-locking threaded hole. The nut can float up to 0.4 mm from the center, in all directions. The maximum total movement is 0.8 mm This self-clinching nut is part of our line of self-clinching inserts. All Clinch inserts are installed using a simple punch During installation process, the fastener is placed in an appropriately sized hole and then compressed by means of a punch. The sheet metal experiences plastic deformation and locks the fastener firmly to itself. The nut is fully installed when the sheet sits flush with the anvil face. So the result is aesthetically perfect and provides high tensile as well as torsional strength

The self-clinching nut solves the problem of those who need a strong threaded hole on sheet metal or light alloy. It offers high resistance to both torsion and tension. The Clinch nut is the most viable, reliable, economical alternative to using the weld nut. It has the advantages of more secure attachment, known and controllable strength values, lower overall application cost due to the lack of production waste and the absence of further processing after installation. In addition, the application result from an aesthetic point of view is perfect This self-clinching nut is part of our line of self-clinching inserts. All Clinch inserts are installed using a simple punch During installation process, the fastener is placed in an appropriately sized hole and then compressed by means of a punch, applyinng only sufficient pressure to squeeze the nut serrations into the parent sheet. The sheet metal experiences plastic deformation and locks the fastener firmly to itself.

The feed heads model PR are installed on top or at the exit of our in-line wire drawers model SKP. Their function is to bring the wire from the dancer of the wire drawer to the feed rolls of the cold header in a pre-straightened form. The feed rolls can be pneumatic or hydraulic, according to the machine size.

The pre-feeding units Model INT are utilized for bringing medium-big diameter wire to the nextmachine, when the uncoiler is of the vertical axis type. These units can work with in-line wire drawing machines, cold heading machines, wire drawingbull-blocks.They are equipped with two feed rolls and a series of straightening rolls.At the exit of the machine can be installed a cut-off unit.

The in-line wire drawing machine mod. SKP is a horizontal-axis monobloc which is positioned between the uncoiler and the cold heading machine. Its function is to size the wire to the exact wire diameter needed for the cold heading application. The in-line wire drawing machine works in automatic with the cold heading machine. The compensator arm (“dancer”) auto-regulates the drawing speed in function of the demand of wire from the cold heading machine. Why do more and more fasteners manufacturers utilize our in-line wire drawing machines mod. SKP? Cost saving, because rod or semi-finished wire are utilized instead of drawn wire. Reduced inventory, because in some cases from the same wire size it is possible to obtain different drawn wire sizes. Improved metal formability, because the wire gets drawn just before entering into the cold heading machine. The wire is warm, so it is easier to form. Age-hardening problem is eliminated. Diameter control, because with an in-line wire...

The power-driven uncoilers Mod. AP are utilized for feeding cold heading machines or wire drawing machines with wire of medium-big diameter. Their main functions are: Feed and pre-straighten wire from coils into the next production machine (an in-line wire drawing machine or a cold heading machine), with consistent reduction of downtimes. Make the wire advance to the feed rolls of the cold heading machine, with reduction of the load on the feeding mechanism of the cold header. Increase the overall efficiency of the cold heading machine. Our power-driven uncoilers Mod. AP cover a range of wire diameters from 12,0 to 36,0 mm. and can be supplied complete with the following accessory devices: Longer coil-holding arm, for utilizing heavier coils. Rotating base, for helping the operator in the coil loading phase, in case of small working areas. Additional set of straightening rolls. Cutting-off device. The power-driven uncoilers Mod. AP can be supplied also in the version with two...

Zip fastener in dantrene wire, uninterrupted-chain zip fastener, separable zippers, invisible zippers, sliders. For more infos check our webpage in the website description.

ASG-SD2500 screwdrivers and nutrunners are premium quality transducerized DC electric tools. Inline screwdrivers are available with push, lever or remote start operation and 1/4 in. hex drive. Fixture mount models with threaded end are available in each torque range for automated or robotic applications. Right angle nutrunners are available with either 1/4 in. hex or 1/4 in. square drive. • Transducerized torque and angle control with compact, lightweight, brushless motor for unparalleled clean, quiet and accurate operation • Sleek aluminum body with high intensity LED tool indicator lights • Foam grip included is standard with all inline models to provide ergonomic comfort for the operator • torque range 0.2-5.6 Nm (4 different models) • available as inline, pistol or right angle design.

OM Series Manual Screw Presenters Accommodates wide variety of screw sizes by plugging in interchangeable rails Large Storage Capacity Screw scooping chamber holds up to 300cc Speedy Screw Pickup Radial Indexing escaper function loads three screws in a row for fast and continuous feeding Motor overload stop function; protection circuit for reverse power protection Screw sizes from M2 to M6 Only for use with ferrous screws up to 25mm long (head included) Interchangeable rail allows you to switch screw sizes with ease

ASG-EH2-R…-A Transducerized Right Angle Electric Nutrunner is a premium, robust tool featuring ergonomic comfort grip and Pulse Fastening Technology, which reduces the reaction typically associated with high torque tools. Right angle body style with 3/8" Square drive and Lever Start operation • Max. torque 20/30 Nm • Transducerized DC electric torque and angle control with brushless motor Sleek profile aluminum body

ASG-EH2-R…-P Pistol Grip Transducerized Electric Screwdriver is a premium, robust tool featuring ergonomic comfort grip and Pulse Fastening Technology, which reduces the reaction typically associated with high torque tools. • Pistol grip body style with 3/8" Square drive and Trigger Start operation • Max. torque 4/10/16/20 Nm • Transducerized DC electric torque and angle control with brushless motor Sleek profile aluminum body

The ASG-EH2-HT40-0000NNN X-PAQ™ Controller is compatible with EH2 Series transducerized DC electric screwdrivers and nutrunners. For applications requiring a torque range of 1 to 35 N.m. • EH2 Series Controller base model without additional options • Torque and angle monitoring and I/O monitoring • Built-in simplified PLC functionality allows ladder logic creation, monitoring and storage • History and monitoring functions record fastening results, torque curves and system error data as .CSV files which are easily imported into spreadsheets for report creation • USB Port for connection to PC and LAN for offsite programming, O/S compatible • Fully integrated bar code reader functionality Multi-Spindle Synchronization available to control up to 10 tools

The ASG-CT2500 X-PAQ™ Controller is compatible with SD2500 Series transducerized DC electric screwdrivers and nutrunners. Used for applications requiring a maximum torque in the range of 10 to 50 lbf.in (1.1 to 5.6 N.m). •Torque control with angle monitoring •Angle control with torque monitoring •Programmable I/O for Process Control •32 task storage keys for multiple assembly set-ups •8 available parameters within each task •Data collection, and run down graphing •Color touchscreen •Optional Networking Module interface for advanced data storage and interfacing with plant controls available ASG-SD2500-…FX, Fixture Mount Transducerized Electric Screwdriver ASG-SD2500-…PL, Push/Lever Start Transducerized Electric Screwdriver ASG-SD2500-…PS, Push to Start Transducerized Electric Screwdriver ASG-SD2500-…RP, Transducerized Right Angle Nutrunner ASG-SD2500-…RQ, ASG-SD2500-10RQ Transducerized Right Angle Nutrunner

For use with telescoping, folding and linear encoder arms 7 in. LCD TFT screen Supports up to 4 encoders Visual sequence guide using CAD drawings or assembly photos Intuitive programming Stores up to 500 assembly sequences Digital I/O - allows interfacing with tool controllers

Material Galvanized Steel Internal working lenght 150 m 200 m 250 m 300 m 400 m Item 3800 3801 3802 3803 3804