Cutting tools - Import export

Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: Overlengthed (long shank) L=120 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Overlengthed (long shank), L=120 Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

BENCHTOP EUROHOLE CUTTING MACHINE WITH LEVER FPE1-EURO P The FPE1 EURO-P allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather etc. It is suitable for small productions. The punch is easily replaceable and is equipped with an extractor device in rubber to facilitate the extraction of the waste. The punch is an element subject to wear. Robust steel structure. Simple use.

ELECTRICAL EURO-HOLE CUTTING MACHINE FPE2-EURO E The punching FPE2 EURO-E is a silent machine, fast and safe with a sturdy steel frame and powerful electric motor that allows the creation of the euro-hole 32 mm on cardboard, blister, plastic, leather, etc., with thickness up to 3 mm. The operation is very simple, once the product is inserted under the punch, the euro-hole can be made by an electric pedal, especially useful in soft material houses and therefore difficult to detect from the sensor, or via switch (product presence sensor) positioned on the head of the punching machine. The punch is an element subject to wear.

MECHANICAL CUTTING MACHINE FPE2-EURO M - EURO-HOLE The FPE2-EURO M die-cutting machine is a simple and safe machine with a sturdy steel structure that allows the realization of a 32 mm hole in cardboard, blister, plastic, leather, etc. with thickness up to 3 mm. The punch is easily replaceable and is equipped with a rubber extractor device to facilitate the extraction of the scrap. Operation is manual by mechanical pedal. The punch is an element subject to wear and must be replaced periodically.

Thread standard: Metric, ISO DIN 13 Type: Short machine tap Form D, for through and blind holes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 800 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H Efficient internal thread cutting. The short structural type makes this tap usable by machine and hand. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 12 mm (#3). Driven by digital electric servomotors. Max pulling speed 160 m/ min (525 ft/ min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m).

Automatic dual directional stirrup bender for the production of stirrups from straight bars (up to Ø 22 mm #7) or coils (up to Ø 16 mm #5). Driven by electric servomotors. Bar Wiser 22N Multifeed automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Virtual mandrel Web Teleassistance

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces.

Electromechanical automatic rebar cutting bench equipped with 2 side folding pockets. MobiPocket allows the unloading and lateral discharge of bars greatly reducing the clutter. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance.

Integrated plant to cut and stock precut bars made of fast automatic straighteners with rollers (such as RETA) and coil processing up to Ø 20 mm. Pulling speed up to 300 m/min. The plant is fully customizable and modular thanks to a wide range of available accessories. Fast Coil change patented system of automatic horizontal wire change (Optional); Straighteners (horizontalvertical) with electronic and independent setting for double wire feeding; Cutting with Brushless motors with adjustable wire guide, fixed and mobile cutting blades; Rollers for the extraction of the last part of the coil; Teleassistance.

Automatic bar bending machine for the production of shapes with positive bends (“L”, “C” and double “C”), up to Ø 40 mm (#11). Device for the production of "bottlenecks“. Automatic system for bars feeding and discharging.

Fast automatic wire straightening machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4), equipped with Senso Technology.

Automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4). Driven by digital electric servomotors. Capacity 2 Ø 10 mm (#3) Max pulling speed 150 m/min (495 ft/min) Straighteners with independent position and adjustment displays for the wires Cutting with Brushless Motorized wire change unit Web Teleassistance

Fast automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4). Driven by digital electric servomotors. Max pulling speed 240 m/min (790 ft/min) Straighteners (horizontalvertical) with electronic setting Rollers for the extraction of the last part of the coil (Optional) Automatic 5inlets motorized wire change and insertion unit (Optional) Patented motorized horizontal wire change unit which allows to change the diameter and the coil in "Zero time" (Optional) Web Teleassistance

Multirotor wire straightening machine using coils up to Ø 20mm for the production of straight bars. 4 wheel drive pulling unit driven by servomotors for high speed production; Maximum pulling speed 140 m/min; The straightening system uses rotors, each one dedicated to a single bar diameter which guarantees perfectly straight bars and wire diameter changes in just a few seconds; Servomotor driven cutting unit guarantees high speed and high cutting accuracy; Twin Version (Optional) with double cutter, double channel, double pulling unit it allows the processing of two bars simultaneously, doubling the productivity of the machine. Lista Bar wire straightening and cutting machine can be equipped with Bundle aligning device on the ground with vibrators (Optional); Indexing carriage for the automatic collection and sorting of the bars produced (Optional); Storage rack pneumatically operated (Optional).

IPC 40 is the plant for the production of radius bars with bends in a single, automatic process. It is composed of the radius machine CER 40, the bidirectionalbending machine P 45 PRO and has an unloading system for the completed bars. It is possible to fabricate 2 bars simultaneously in the diameter range between Ø10 mm and Ø 40 mm.

Rebar cutting machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 26 mm 100 cuts/minute

Rebar shearing machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 40 mm (#11) 50 cuts/minute

Rebar cutting machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 45 mm (#14) 50 cuts/minute

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 32 mm (#10) Plate revolving speed 9 RPM

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 36 mm (#11) Plate revolving speed 8 RPM

Ring bending machine for rings of unlimited radius (rib rings) and spirals. Driven by a variablespeed electric motor min 20; max 30 rpm. Adjustable bending radius from a minimum 15 cm (with small diameters) and over. For Ø 6 mm (#3) Ø 32 mm (#10) wires.

The “Coldrive” 3MV is a cold rolling line with multiple vertical drawing capstan for the production of smooth and ribbed wires from Ø 3,4 to Ø 10 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 16 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Multipass line and multiple vertical drawing capstan 2MV 3,4 12 mm (12 m/s) 4MV 3 8 mm (16 m/s) “Coldrive” MO with single horizontal drawing capstan MO 4,5 12 mm (8 m/s) MO 4 12 mm (8 m/s) MO 4 16 mm (8 m/s)

The Coldrive MO is a cold rolling line with single horizontal drawing capstan for the production of smooth and ribbed wires from Ø 4 to Ø 16 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 8 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous vector motor" low consumption, high power User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Multipass line and multiple vertical drawing capstan 2MV 3,4 12 mm (12 m/s) 3MV 3,4 10 mm (16 m/s) 4MV 3 8 mm (16 m/s) “Coldrive” MO with single horizontal drawing capstan MO 4,5 12 mm (8 m/s) MO 4 12 mm (8 m/s)

The Combidrive MO is a cold rolling line with single horizontal drawing capstan for the production of smooth and ribbed wires in bars from Ø 4 to Ø 12 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Wire is rolled to reduce the section and if necessary ribbed, then straightened and cut according to the different lengths scheduled. Rotating cut system to ensure continuous production Max. pulling speed (straight bars production) 6 m/s Max. pulling speed (coil production) 8 m/s Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s)

STRETCH DRIVE MO is a Cold Rolling and Stretching Line with single horizontal drawing capstan for the production of both smooth and ribbed, colddrawn wire with low carbon content and hot rolled high ductility ribbed wire. Stretching Process Stretch Drive MO 6 16 mm (8 m/s) Cold Rolling Process Stretch Drive MO Cold 1 4,5 12 mm (8 m/s) Stretch Drive MO Cold 2 4 12 mm (8 m/s)

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 8 mm (0.315 in.). Driven by digital electric servomotors. Max pulling speed 160 m/min (525 ft/min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Fixed cut with automatic backstop length for a maximum cutting flexibility (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m).

The rotor type wire straightening machine RI 8 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 3mm to Ø 8mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 8/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional

The rotor type wire straightening machine RI 12 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 4mm to Ø 12mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 12/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional