Results for
DC DI CANDIA RUOTE
Italy
The LTW series wheels are manufactured in high grade Polyamide and filled with glass fibers plus additional natural fibers, and molded through a new vaacum and material drying process to assure high resistance in temperatures bewteen -40°C and +150°C. They are available with plain bore and with HQS self lubricating bushes, to allow a good rolling capacity in any condition of use. The LTW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted in the world of uses in temperatures and bakery / food industry. Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304 / 316, and are available in both metric and inches standard sizes, and are also available in double-layer galvanized pressed steel.
Request for a quoteDC DI CANDIA RUOTE
Italy
The POLY-D wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products. Lifetime of these wheels has been improved thanks to the complete absence of air bubbles inside the finished product, obtained through our new production process. The POLY-D wheels can be fitted into a specific series of brackets for which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted, for both industrial and food industry. Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304, and are available in both metric and inches standard sizes, and are also available in double-layer galvanized pressed steel. The POLY-D wheels can be used on trolleys for food industry, tannery industry, equipment and trolleys for meat and fish industry, slaughterhouses, ice cream machinery and flower trolleys
Request for a quoteDC DI CANDIA RUOTE
Italy
The D-FLEX wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products, and the only one to be covered by a lifetime warranty** against the de-bonding of the elastic Polyurethane tyre from the wheel centre, plus they grant a high cut and tear propagation resistance. Combines the load capacity and the resistance to wear and tear of the polyurethane with the ability to overcome obstacles and to reduce noise, vibrations and impacts of the elastic rubber. The Polyurethane tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or chemical bonding. Recommended on trolleys for food industry and chemical industry, industrial trolleys, equipment and trolleys for meat and fish industry, slaughterhouses, pharmaceutical industry, floor-washing machines and scrubbers, and for traction.
Request for a quoteDC DI CANDIA RUOTE
Italy
The wheel core of the RXT series is manufactured in special Ditherm® compound, combined with special fibers and molded under an innovative DC developed high pressure + extreme temperature process, and its tyre is made in a special high quality elastic rubber for high temperatures. The white rubber tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or vulcanization such as for almost any competition product. This particular bonding is resulting in the highest quality wheel in its range of application, featuring a drastic reduction in the risk of tyre de-bonding during the work in temperatures. They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement. The RXT wheels can be fitted into a specific series of brackets for high/low temperatures.
Request for a quoteDC DI CANDIA RUOTE
Italy
The wheel core of the RHT series is manufactured in special Ditherm® compound, combined with special fibers and molded under an innovative DC developed high pressure + extreme temperature process, and its tyre is made in a special high quality elastic rubber for high temperatures. The black rubber tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or vulcanization such as for almost any competition product. This particular bonding is resulting in the highest quality wheel in its range of application, featuring a drastic reduction in the risk of tyre de-bonding during the work in temperatures. They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement.The RHT wheels can be fitted into a specific series of brackets for high/low temperatures.
Request for a quoteDC DI CANDIA RUOTE
Italy
The XTW series is the only wheel which is assuring a temperature resistance up to +400°C and not being made out of aluminum or cast-iron, with the big advantage to preserve the floor and to secure a dramatic reduction of noise if compared to metal wheels.They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement. The XTW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted in the world of uses in temperatures and bakery / food industry. Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304 / 316, and are available in both metric and inches standard sizes, and are also available in double-layer galvanized pressed steel. They are RoHS - REACh compliant.
Request for a quoteDC DI CANDIA RUOTE
Italy
The D-NAMIC wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products, and the only one to be covered by a lifetime warranty against the de-bonding of the Polyurethane tyre from the wheel centre. The Polyurethane tyre grant a high cut and tear propagation resistance, is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or chemical bonding. The D-NAMIC wheels can be fitted into a specific series of brackets for which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted, for both industrial and food industry. D-NAMIC are recommended on trolleys for food industry and chemical industry, industrial trolleys, equipment and trolleys for meat and fish industry, slaughterhouses and textile industry.
Request for a quoteDC DI CANDIA RUOTE
Italy
The STW series wheels are manufactured with an exclusive DC Di Candia Ruote’s composite material, the THT, which has been studied and developed in our plant in Besnate, and is used exclusively for the production of this wheel range. These wheels grants a superior and unmatched mechanical resistance to heavy impacts, an outstanding resistance against chipping and breaking caused by hitting of sharp obstacle and a great rolling capacity even in plain bore configuration, thanks to the self-lubricating properties of the THT material. They also assure an incredible resistance against aggressive cleaners, chemicals, oils, acids, steam and salty water, and are available with plain bore and with double special HT ball bearings, to allow a perfect rolling capacity in any condition of use. The THT material is certified by FDA for contact with foods. The STW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced.
Request for a quoteDC DI CANDIA RUOTE
Italy
Xtreme-x series, the new range of Stainless Steel brackets grants a significant step beyond in the worldwide panorama of wheels and castors for food industry, bakeries, cleaning industry, hospitals, hygienic equipment and in every application where the use of Stainless Steel castors is required. Xtreme-z series, the new range of Zinc-plated steel castors is setting a new step beyond in the wide range of galvanized steel castors, extremely flexible and suitable for all uses from industry to supermarkets. Thanks to the new concept of plate-fork computerized moulding is featuring an extreme precision in tolerances and in ball race shape control, offering the best swivel capacity in every condition of temperature and load. The improved load capacity (over 10%) and the high standard of the assembly assures a long life of the castors which are 100% free from maintenance.
Request for a quoteDC DI CANDIA RUOTE
Italy
The MTW series has replaced the old “phenolic” wheels, and is manufactured in special Ditherm® compound, combined with special fibers and molded under an innovative DC developed high pressure + extreme temperature process which results in the highest quality wheel in its range of application. They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement. The MTW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted in the world of uses in temperatures and bakery / food industry. Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304, and are available in both metric and inches standard sizes, also available in double-layer galvanized steel.
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer hard treads Tipo – W WITHOUT SAFETY BRAKE: Code 759 WITH SAFETY BRAKE: Code 757 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE Code 775 WITH SAFETY BRAKE Code 785 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n.125 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: Code 430 WITH SAFETY BRAKE: Code 440 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 424 WITH SAFETY BRAKE: Code 647 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 200 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer with chromed die-cast zamak hood ADAPTO ® chromed zamak WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 27 Code 861 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 27 Code 867 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 27 Code 220 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 27 Code 221 BODY STANDARD SURFACE FINISH: Bright chromed Code 470 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colours: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 200 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer with chromed die-cast zamak hood WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: Code 469 WITH SAFETY BRAKE: Code 443 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 267 WITH SAFETY BRAKE: Code 685 BODY STANDARD SURFACE FINISH: Bright chromed Code 470 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n.200 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer soft tread Type – W WITHOUT SAFETY BRAKE: Code 770 WITH SAFETY BRAKE: Code 780 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 767 WITH SAFETY BRAKE: Code 769 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 125 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: Code 730 WITH SAFETY BRAKE: Code 740 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 719 WITH SAFETY BRAKE: Code 737 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 150 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer with chromed die-cast zamak hood WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: Code 524 WITH SAFETY BRAKE: Code 525 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 543 WITH SAFETY BRAKE: Code 544 BODY STANDARD SURFACE FINISH: Bright chromed Code 470 WHEELS STANDARD COLOURS: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 150 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer with chromed die-cast zamak hood WHEELS: Reinforced copolymer soft treads Type – W Lateral metal disks WITHOUT SAFETY BRAKE: Code 699 WITH SAFETY BRAKE: Code 570 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 240 WITH SAFETY BRAKE: Code 678 BODY AND LATERAL DISKS STANDARD SURFACE FINISH: Bright chromed Code 470 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING Cardboard box cm. 40x27x48 h. Content: n. 150 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: ADAPTO ® chromed zamak WHEELS: Reinforced copolymer soft treads Type – W Lateral metal disks WITHOUT SAFETY BRAKE: With ADAPTO ® Ø 25 Code 633 WITH SAFETY BRAKE: With ADAPTO ® Ø 25 Code 622 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 667 WITH SAFETY BRAKE: Code 648 BODY AND LATERAL DISKS STANDARD SURFACE FINISH: Bright chromed Code 470 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 150 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer with chromed die-cast zamak hood ADAPTO ® plastic WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 252 With ADAPTO ® Ø mm. 45 Code 253 With ADAPTO ® Ø mm. 50 Code 254 With ADAPTO ® Ø mm. 55 Code 255 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 259 With ADAPTO ® Ø mm. 45 Code 483 With ADAPTO ® Ø mm. 50 Code 260 With ADAPTO ® Ø mm. 55 Code 261 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 285 With ADAPTO ® Ø mm. 45 Code 286 With ADAPTO ® Ø mm. 50 Code 287 With ADAPTO ® Ø mm. 55 Code 288 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 292 With ADAPTO ® Ø mm. 45 Code 293 With ADAPTO ® Ø mm. 50 Code 294 With ADAPTO ® Ø mm. 55 Code 295 BODY STANDARD SURFACE FINISH: Bright chromed Code 470 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread...
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer ADAPTO ® plastic WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 431 With ADAPTO ® Ø mm. 45 Code 437 With ADAPTO ® Ø mm. 50 Code 438 With ADAPTO ® Ø mm. 55 Code 439 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 441 With ADAPTO ® Ø mm. 45 Code 447 With ADAPTO ® Ø mm. 50 Code 448 With ADAPTO ® Ø mm. 55 Code 449 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 296 With ADAPTO ® Ø mm. 45 Code 642 With ADAPTO ® Ø mm. 50 Code 297 With ADAPTO ® Ø mm. 55 Code 299 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 239 With ADAPTO ® Ø mm. 45 Code 628 With ADAPTO ® Ø mm. 50 Code 008 With ADAPTO ® Ø mm. 55 Code 681 BODY STANDARD FINISH: Black Code 440 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box...
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer ADAPTO ® plastic WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 25 Code 598 With ADAPTO ® Ø mm. 27 Code 432 With ADAPTO ® Ø mm. 32 Code 434 With ADAPTO ® Ø mm. 35 Code 435 With ADAPTO ® Ø mm. 38 Code 436 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 25 Code 049 With ADAPTO ® Ø mm. 27 Code 442 With ADAPTO ® Ø mm. 32 Code 444 With ADAPTO ® Ø mm. 35 Code 445 With ADAPTO ® Ø mm. 38 Code 446 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE With ADAPTO ® Ø mm. 27 Code 453 With ADAPTO ® Ø mm. 32 Code 235 With ADAPTO ® Ø mm. 35 Code 236 With ADAPTO ® Ø mm. 38 Code 403 WITH SAFETY BRAKE With ADAPTO ® Ø mm. 25 Code 037 With ADAPTO ® Ø mm. 27 Code 237 With ADAPTO ® Ø mm. 32 Code 454 With ADAPTO ® Ø mm. 35 Code 238 With ADAPTO ® Ø mm. 38 Code 413 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code305 CONDUCTIVE CASTORS: Wheels standard...
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer with chromed die-cast zamak hood ADAPTO ® plastic WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 27 Code 247 With ADAPTO ® Ø mm. 32 Code 248 With ADAPTO ® Ø mm. 35 Code 249 With ADAPTO ® Ø mm. 38 Code 251 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 27 Code 256 With ADAPTO ® Ø mm. 32 Code 257 With ADAPTO ® Ø mm. 35 Code 258 With ADAPTO ® Ø mm. 38 Code 473 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 27 Code 281 With ADAPTO ® Ø mm. 32 Code 282 With ADAPTO ® Ø mm. 35 Code 283 With ADAPTO ® Ø mm. 38 Code 284 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 27 Code 289 With ADAPTO ® Ø mm. 32 Code 290 With ADAPTO ® Ø mm. 35 Code 291 With ADAPTO ® Ø mm. 38 Code 460 BODY STANDARD SURFACE FINISH: Bright chromed Code 470 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread...
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer with chromed die-cast zamak hood ADAPTO ® chromed zamak WHEELS: Reinforced copolymer soft treads. Type – W WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 38 Code 018 With ADAPTO ® Ø mm. 45 Code 023 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 38 Code 019 With ADAPTO ® Ø mm. 45 Code 025 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 38 Code 029 With ADAPTO ® Ø mm. 45 Code 033 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 38 Code 030 With ADAPTO ® Ø mm. 45 Code 034 BODY STANDARD SURFACE FINISH: Bright chromed Code 470 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x30 h. Content: n.100 castors Plastic foil wrapped pallet holding 24 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer ADAPTO ® plastic WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 734 With ADAPTO ® Ø mm. 45 Code 735 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 744 With ADAPTO ® Ø mm. 45 Code 745 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 729 With ADAPTO ® Ø mm. 45 Code 736 WITH SAFETY BRAKE: With ADAPTO ® Ø mm. 42 Code 747 With ADAPTO ® Ø mm. 45 Code 748 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 125 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteResults for
Castors wheels - Import exportNumber of results
26 ProductsCompany type