Safety equipment - Import export

Inspection tank caps male threaded, in plastic material, complete with sealing gasket and fixing flange. We supply two different types of this product: Inspection cap for Ø 124 mm hole Inspection cap for Ø 215 mm hole We can also provide them equipped with safety chain. The inspection tank caps are generally used for canopies of power generators and on tanks of agricultural machines and industrial vehicles, spray dryer, water tanks and so on. We always guarantee quality and reliability of our product over time. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and international regulations.

P3 oil tank cap female threaded, in plastic material, passage diameter 32 mm with NBR sealing gasket. It is available hermetic or ventilated. On request, we can supply versions with different colours, customized writings and oil logos. We also provide versions with modified design for easing the handle even when worker uses work gloves. We supply P3 filling plug combined to our P3 threaded filling system, possibly also equipped with safety cable and removable filter. It is however possible to obtain the threaded filler neck profile directly from the tank molding. P3 oil tank cap is generally used on tanks of building and agricultural vehicles, such as earth-moving machineries, on machines for cleaning and environment and on oil tanks of special vehicles. The use of accurate production processes in all phases and the careful selection of raw materials guarantee quality and reliability of our product over time.

P3 tank cap for gasoline, diesel or biodiesel and cleanser, female threaded, in plastic material, passage diameter 32 mm with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the P3 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. On request, we can supply versions with different colours, customized writings and logos. We also provide versions with modified design for easing the handle even when worker uses work gloves. We supply P3 filling plug combined to our P3 threaded filling system, possibly also equipped with safety cable and removable filter.

D.80 tank cap in galvanised steel, with internal bayonet coupling passage diameter 80 mm, with sealing gasket. It is available ventilated and equipped with safety chains or cables. The D.80 fuel tank cap shall be sold with our bayonet filling systems passage 80 mm and it is used for different applications in several industrial fields, such as tank of generating sets, truck, building and agriculture machines, earth moving machines, and so on. We guarantee always quality and reliability of our product. We perform several strength and durability tests and test for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations.

D.60.TE fuel tank cap with key, in plastic material, hermetic, with internal bayonet coupling, passage diameter 60 mm with sealing gasket. This product is equipped with lock protection door with “DIESEL” writing, to protect it from dust, debris residues and rainwater. At your request, we can supply it equipped with safety chains or cables. This product shall be sold with our bayonet filling systems passage 60 mm. The D.60.TE tank cap with key is mainly used in truck tanks, on agricultural and construction equipment, and in power generator tanks. We guarantee always quality and reliability of our product.

D.60 BC steel fuel tank cap with key for gasoline, diesel or biodiesel, ventilated, with internal bayonet coupling, passage diameter 60 mm with sealing gasket. At your request, we can supply it equipped with safety chains or cables. This product shall be sold with our niche series 70 for connection to flexible fuel hose passage Ø 70 mm or with bayonet filling systems passage 60 mm which can be possibly provided with anti-syphon device or removible filters. Thanks to its feature and its ergonomic design, the D.60 BC cap with key is used for different applications in several industrial fields, such as tank of generating sets, truck, building and agriculture.machines , earth moving machines, and so on. We guarantee always quality and reliability of our product.

D.60 steel fuel tank cap for gasoline, diesel or biodiesel, internal bayonet coupling passage diameter 60 mm, with sealing gasket. It is available hermetic or ventilated and, at your request, we can supply it in different colors for various needs in the fields of use and it can be equipped with safety chains or cables. This product shall be sold with our niche series 70 for connection to flexible fuel hose passage Ø 70 mm or with bayonet filling systems passage 60 mm, which can be possibly provided with anti-syphon device or removable filters. Thanks to its feature and its ergonomic design, the D.60 cap with key is widely used on tanks of trucks, on building and agricultural machines, on earth moving machines, on generating sets tanks and so on. We aways guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases.

G2 fuel tank cap in galvanised steel and stainless steel material, with external bayonet coupling passage diameter 38 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. It can be supplied, at your request, equipped with safety chains or cables. This product shall be sold with our external bayonet filling systems passage 38 mm. The G2 fuel tank has several applications in building and agricolture field: on wheel loader, tractor, excavator, earth moving machineries, trucks, garden machines, motor pumps, motor mowers, air spraiers and irrigator machines. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product.

ASM.OB fuel tank cap, in aluminium or steel material, with internal bayonet coupling, passage diameter 30 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the ASM.OB tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We can supply versions equipped with safety chains or cables and with customized writings, company logos and drawings. This product shall be sold with our bayonet filling systems passage 30 mm. ASM.OB is used particularly for fuel and oil tanks. in many applications of different industrial sectors

TED tank cap with key for oil and fuel, in steel and stainless steel material, with internal bayonet coupling passage diameter 30 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. The steel variant can be supplied in black version. At your request, the TED filling plug with key can be equipped with safety chains or cables. This product shall be sold with our internal bayonet filler necks passage diameter 30 mm or with our niche series 45 for connection to oil or fuel flexible fuel hose Ø 45 mm. The TED fuel tank cap with key is used for different applications in several industrial fields, and, thanks to its small size and its high quality, it is particularly suitable in the fields of pneumatics and oil-hydraulics, as well as oil cap in generating sets, earth moving machines, excavators and so on.

V7 S fuel tank cap, in aluminium or stainless steel and anodised aluminium material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and can be equipped with safety chains or cables and removable filter. On request it can be supplied in other colors ( blue, red, gold ) for various needs in different sectors. We manufacture types with anodised aluminium cap covering and the other metal components in stainless steel, for nautical application and corrosive environments. The V7S fuel tank plug is usually supplied with our bayonet filling systems passage 40 mm with flange, to be screwed on the hulls of boats or inflatable boats, on the special vehicles bodies or on the canopies of industrial machines;

ASM.CB fuel tank cap, in aluminium and steel material, with internal bayonet coupling, passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the ASM.CB tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We can supply versions equipped with safety chains or cables and with customized writings, company logos and drawings on request. This product shall be sold with our bayonet filling systems passage 40 mm. Thanks to its ergonomic design and its technical features, the ASM.

G3 fuel tank cap for gasoline, diesel or biodiesel, hydraulic oil, lubricating oil and cleansers, in stainless steel and galvanised steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the G3 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. It can be supplied, on request, equipped with safety chains or cables. This product shall be sold with our bayonet filling systems passage 40 mm.

D.40 tank cap for gasoline, diesel or biodiesel, hydraulic oil, lubricating oil and cleanser, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. This product is available hermetic and ventilated and we can propose it in a wide range of colors (black, blue, red, green) for various needs in different sectors. At your request, it can be equipped with safety chains or cables. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments as well as for biodiesel and urea solutions tanks (AUS 32 (AdBlue®)). This product shall be sold with our bayonet filling systems passage 40 mm or with our niches for connection to flexible fuel hose passage Ø 60 mm or with our complete filling systems, that we can customize in relation to you specific needs.

690 tank cap for gasoline, diesel or biodiesel, hydraulic oil, lubricating oil and cleanser, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated. We can propose this product in a wide range of colors (black, gray, blue, red, green) for various needs in different sectors and, at your request, equipped with safety chains or cables. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments as well as for biodiesel and urea solutions tanks (AUS 32 (AdBlue®)). This product shall be sold with our bayonet filling systems passage Ø 40 mm or with our niches for connection to flexible fuel hose passage Ø 60 mm or with our complete filling systems, that we can customize in relation to your specific needs.

D.96 tank cap for gasoline, diesel or biodiesel, hydraulic oil, lubricating oil and cleanser, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and diameter of cap covering 96 mm. This cap is equipped with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and, at your request, in varied colors for various needs in different sectors. We can propose this product equipped with safety chains or cables or in a version with padlock, thanks to the Ø 96 mm cap covering. We manufacture types with all metal components in stainless steel for nautical applications, corrosive environments as well as for biodiesel and urea solutions tanks (AUS 32 (AdBlue®). This product shall be sold with our bayonet filling systems passage Ø 40 mm or with our niches for connection to flexible fuel hose Ø 60 mm or with our complete filling systems, that we can customize in relation to you specific needs.

AIR fuel tank cap with key in technopolymer and aluminium material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and it can be equipped with safety chain or cable as well as with removable filter. On request, we can supply it in grey or white color. AIR tank cap is usually sold with our bayonet filling systems passage Ø 40 mm with flange or with our niches series 32–40–50 for connection to flexible fuel hose of different diameters (Ø 32 mm / 40 mm / 50 mm) or with our complete filling systems, that can be customized in relation to specific needs. The additional use of built-in housing for filling caps make easier and very faster the assembling operation of fuel filling systems in the most industrial applications.

R tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in steel and stainless steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. The steel version can be supplied also with black cap covering. We supply this cap with variable or fixed code key or with the universal fixed code key 455: in this case, a single key allows to open all the components with keyed alike locking system, for example in a soundproofed cabin of power generator (cap with key, pushbutton actuator with key, handle with key, selector switch activator key). Our keys with code 455 are perfectly interchangeable with the other ones with same code on the market. You can find more information about our key with code 455 in our News section. On request we can supply variants equipped with safety chains or cables.

D.76 tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket It is available hermetic or ventilated. We can propose this product in a wide range of colors and equipped with safety chains or cables or lock protection door We supply this cap with variable or fixed code key or with the universal fixed code key 455. This product shall be sold with our bayonet filling systems passage 40 mm or with our niches for connection to flexible fuel hose passage Ø 60 mm or with our complete filling systems. The D.76 tank cap with key is used for different applications in several industrial fields, such as generating sets, soundproofed canopy gensets, container, lighting towers, earth moving machines, wheel excavators, auxiliary tanks and so on. Product resulted suitable to approval tests according to the International Standards.

IDEAL FOR THE PROCESSING OF MILK AND THE PRODUCTION OF CHEESE WITH CONTINUOUS MOVEMENT, IT WORKS IN A PARTICULARLY SOFT AND REGULATED WAY IN ORDER TO REPRODUCE THE MANUAL GESTURE. It allows you to make a series of adjustments that offer the possibility to perform the desired functions and work the product in a delicate way, very similar to the manual gesture. Solid and entirely made of stainless steel. Operation method: Milk heating and cooking at any speed and with great delicacy. Gradual and sweet curd cutting, very similar to manual cutting thanks to the special strap thorn. Cleaning of the double bases with a special cleaner. Available with electronic speed variator (inverter) or mechanical speed variator 48V. Stainless steel casing of the gearmotor (only on model with inverter). Total protection equipment, with safety or cover limit switches, in plastic material and emergency stop on the gearmotor. Included accessories: Wheel Breakwater

This mobile pallet turner is an electrically powered trolley with a maximum capacity of 1500 kg, operated by tiller controls and powered by a gel battery. It is an extremely versatile and compact device that allows the replacement of the pallet to be carried out in very confined spaces, thus not requiring an area to be dedicated in the plant. Falcon Wing is also available as a stationary machine. The mobile bench vault is equipped with the latest generation gel batteries with a duration of 8-10 hours. It is possible to increase the duration with larger batteries. In addition, to ensure that mobile devices have a non-stop operating cycle, we provide the optional “roll-on / roll-off”, a quick battery change system. All Toppy equipment are equipped with safety systems in order to prevent accidents at work, with particular attention to GMP standards to ensure the appropriate quality standards.