Pump - Import export

N ° 1 Soilmec motor pump, model 7T450.1 Year of construction: 2003 Overhauled and repainted Deutz brand diesel engine, model BF8M1015C, power 440 hp Change brand Eaton-Fueller 14613 Triplex pump Soilmec Soilmec, model 7T450.1 Piston bore: 4 '' Piston stroke: 7 '' Pump overhauled and maintained Fluid end completely maintained with all consumables replaced (pistons, gaskets, valve seats etc. ..) Repainted Tested at 450 bar with water Weight approx 12 tons Viewable at our office

Factory new triplex pump, Triplex 140 model Max flow rate 140 lt / 1 ' Pressure up to 50 bar Drive by hydraulic motor Accessories safety valve pressure gauge with pressure gauge suction pipe

1 Drillmec duplex piston pump, model 10D2C Reciprocal type Brand new Piston diameter: 5 '' up to 7 '' 1/2 Stroke: 10 '' Maximum pressure: 47 bar Maximum flow rate: 2270 lt / 1 ' Required power: 123 hp

N ° 1 drillmec brand duplex piston pump model 8D1S brand new double acting pump Piston diameter from 5 '' up to 8 '' Stroke: 8 '' Maximum pressure: 33 bar Max flow rate 2200 lt / 1 ' Power required 82 hp

C and CF series are new range of sanitaryhygienic pumps to satisfy the high standard required for food and pharmaceutical industry applications. Designed to attain the highest hygienic standard, the lobe pumps are easily fully cleanable as to enable hot water consumption and reduce the use of chemical products for their cleaning. The materials used, surface finishing and all the characteristics of the design have enabled to get the European Hygienic Engineering & Design Group EHEDG and 3A certification. C series incorporate new front loading seals design for easier and quick servicing. In addition, maintenance is also simplified by a new external axial adjustment system. All the parts that come into contact with the product are made in stainless steel 1.4404, pump body is cast with integral connections without welding.

Developed from the successful existing range of OMAC “B” series pumps, the new series “BF” pumps retain the principles of performance, solidity and reliability and incorporate a new design which enables easier cleaning of the externals and AISI 304 gearbox. All product wetted parts are in AISI 316L with ferrite content of less than 3%. The cover is smooth with a new gasket and the rotors offer the option of either in built fixing nuts or external fixing without nuts for F series. The pump body is pressforged and has integral non welded Tri clamp or DIN118643 connections. Elimination of slots ensures easy C.I.P. cleaning with no cleaning fluid retention. F series (without nuts on rotors) has obtained, after Cleanability Tests at München Engineering University, EHEDG’S certification (European Hygienic Engineering & Design Group) show that this kind of pump meets all requirement for hygienic design and is to be classified as “easy cleanable”.

The BE series pumps are simple and robust and are characterised by their monoblock design. The drive unit, thanks to the hallow shaft and to the rear cover provided with an IEC flange, is directly fixed to the pump by creating a unique compact and light body. The new design, with smooth cover and fixing nut built in the rotors, improves the cleaning standard. The lobe pumps of this series are provided only with bilobe rotary piston rotors in S.S. 316 L or in antifriction alloy CY5SnBiM, which ensure an excellent volumetric efficiency and a smooth and regular transfer of several liquid or viscous products. In less demanding works, the BE pumps can replace the B pumps and, meeting the increasing demand of cheap lobe pumps with good sanitary standard, allow to widen the utilization possibilities of the OMAC lobe pumps.

Developed from the successful existing range of OMAC “B” series pumps, the series “BBBA” pumps retain the principles of performance, solidity and reliability and incorporate a new design which enables easier cleaning of the wetted parts. BA series has obtained 3A Sanitary Standard certification. Several innovative OMAC features from BFF series have been incorporated within the product. BB pumps have design according 3A Sanitary Standard (new standard Number 0210). BA pumps have design, surface finish & elastomers in either 3A – FDA approved and are delivered with 3A nameplate and certificate. Difference between classic B series and BB/BA are Rotor case profile and geometry allows for complete self draining of the pump with vertical ports In built fixing nuts with flat cover minimises product entrapment & improves CIP Flush end cover Oring that follows rotor case profile

The B series lobe pumps satisfy most transfer applications to suit hygienic and chemical characteristics. OMAC'S lobe pumps are appreciated all over the world for stoutness and performances, assures good services, long endurance, easy and cheap maintenance.This range consists of 16 models with deliveries from 0.05 to 200 m³/hr with the following versions available ST Model with standard tolerances, SM Model with increased tolerances, both being made in AISI 316 stainless steel and both available with Duplex shafts. HP Model has crescent shaped rotors in antiseizure stainless steel alloy with shafts in Duplex for counter pressures up to 20 Bar. The OMAC Lobe Pump is modular in design allowing the main parts such as the rotor and seals, to be changed quickly and easily. A wide range of rotors, seals and gaskets is also available.

ALLOWS THE DESIRED QUANTITY OF SERUM WITH ABSOLUTE PRECISION AND GRADUALITY TO BE DISTRIBUTED INSIDE THE DOUBLE FILLERS. An optimal system, which does not alter the characteristics of the serum graft. Equipped with remote control, it allows remote starting. It also allows the reverse operation of aspirating liquids from containers. Made in accordance with CE regulations.

The cylinders used in lifting equipment must be designed in such a way that their weight is as low as possible. For this reason, welded constructions are mainly used, with piston rods made of tubes, often of special materials, which make it possible to reduce wall thickness while maintaining the required load limits. Particular attention must be paid to the welds, which are often inspected with ultrasound, as the breakage of a welded part can easily lead to very serious damage. HIDROMEC develops hydraulic cylinders and systems for hydraulic lifting equipment that are reliable, durable and in compliance with specific industry standards.

N ° 1 Beretta brand drilling rig, model T41 Year 2004 CE certified Hatz 4L41C engine, power 45 KW (61 hp) soundproofed N ° 4 oversized stabilizers to ensure perfect stability Stroke for 3 m long rods Maximum pull 4 tons Rotation head with max torque 650 kgm; 2 motors Double vice with max passage 220 mm Winch Possibility to install tower extension Foam pump / clear water, flow rate 30 lt / 1 ', pressure 50 bar Screw pump with max flow rate 120 -150 lt / 1 ', pressure 20 bar Weight class 3000 kg Immediately available

N ° 1 drilling rig on truck model PJ 20_1500 on 3-axis 6x6 truck 6x6 three-axle truck. power 380-420 hp, total mass 33 tons 6-cylinder turbo auxiliary engine, power 290-430 hp Usable stroke for 6 m long rods Max pull 20 tons Rotation head with max torque 1500 kgm; 2 speeds. maximum speed 100-120 rpm double vice with max passage 330-420 mm Duplex piston mud pump with max flow rate 600-1600 lt / 1 ' Schima pump carries max 50-80 lt / 1 ', pressure 50 bar Winch with max pull 2500-4800 kg @ 1 layer Control panel mounted on the side of the drilling rig For water wells, boreholes and mining research with direct and reverse circulation Price upon request

N ° 1 Clivio brand mixing and injection unit, model AP-OL ETA with electric operation. Turbomixer with capacity: 400 lt - installed power 7.5 KW Agitator with capacity: 1000 lt - installed power 4.5 KW Clivio brand injector with power 11 KW - Pistons diameter 80 mm. Max flow rate 120 lt / 1 ', pressure up to 70 bar All mounted on a frame with lifting hooks Overhauled and repainted Price upon request.