Bending machine - Import export

Automatic bar bending machine for the production of shapes with positive bends (“L”, “C” and double “C”), up to Ø 40 mm (#11). Device for the production of "bottlenecks“. Automatic system for bars feeding and discharging.

Automatic mesh bending machine, equipped with double gearmotor, fast fitting pins. It is equipped with Reinforced framework; Bending pin holder; Adjustable mobile bending bar (minimum length 70 mm); 'KS31' electronic digital programmer which allows adjusting bending angles.

Electromechanical automatic mesh cutting and bending machine for the production of U, L, Zshaped mesh and sandwich panels. Mesh handling is guaranteed by clamps driven by electric servomotors. Max mesh width 1250 mm; Max mesh length 6000 mm.

Four speed dualdirection bar bending machine. It doesn't pull the bars during bending operations. Driven by digital electric servomotors. Industrial PC equipped with touch screen graphic display 8'', which allows Programming stirrups and shapes with up to 30 bends; Adjusting bending angles; Storing up to 100 different shapes.

Automatic mesh bending machine, equipped with double gearmotor, fast fitting pins and switch for 3 mechanical programs. It is equipped with Reinforced framework; Bending pin holder; Adjustable mobile bending bar (minimum length 70 mm);

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 45 mm (#14) Plate revolving speed 5÷12 RPM Equipped with electronic programmer up to 50 bends

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 36 mm (#11) Plate revolving speed 8 RPM

Multirotor straightening and shaping machine using coils up to Ø 20mm for the production of straight bars, large stirrups and shapes with bends on both ends. 4 wheel drive pulling unit driven by servomotors for high speed production; Maximum pulling speed 140 m/minute; The straightening system uses rotors, each one dedicated to a single bar diameter which guarantees perfectly straight bars and wire diameter changes in just a few seconds; Servomotor driven cutting unit guarantees high speed and high cutting accuracy; 2 bidirectional bending units work “offline” so the bars are bent in “masked time”; Automatic bending tooling changeover for higher productivity; Indexing carriage for the automatic collection and sorting of the bars produced.

Ring bending machine for rings of unlimited radius (rib rings) and spirals. Driven by a variablespeed electric motor min 20; max 30 rpm. Adjustable bending radius from a minimum 15 cm (with small diameters) and over. For Ø 6 mm (#3) Ø 32 mm (#10) wires.

Automatic steel ring bending machine for the production of circles, spirals and radius bars for diameters from Ø 6 mm (#3) to Ø 40 mm (#14). The machine uses a system of 4 rollers, one of which is specifically to ensure the stability and consistency of the radius of the curve. The rebar combined machine CER40 can be programmed to produce automatically up to 5 different radius curves on the same bar thanks to the measuring system.

Dualdirection bar bending machine with threespeeds selfbraking motor driven by inverter. The machine doesn't pull the bars during bending operations. The equipment is driven by a selfbraking motor. Electronic digital programmer mod. 'KS31' which allows Programming stirrups and shapes with up to 30 bends; Adjusting bending angles; Storing up to 50 different shapes.

Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part Operation by means of digital electric servomotors 4 adjustable bending speeds

Automatic rebar bending machine for bars up to Ø 40 mm. It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging 2 adjustable bending speeds

Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Version with automatic feeding and discharging units, which fold away (Optional) they allow the minimum distance of 980 mm between the two bending mandrels. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part the positions of the clamps and guides on the kick off arms and their adjustment are motorized and automatic Operation by means of digital electric servomotors 4 adjustable bending speeds

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 32 mm (#10) Plate revolving speed 9 RPM

Punto Curvatura is capable, with special cylinders installed on the bending machines, to comply with the most complex curvature requirements for the realization of tensile structures used to cover circuses, military hangars, museums, exhibition stands, gazebos, stages and agricultural structures.

The curve of the aluminum profile used for mobile walls is made with a sophisticated soft curving of the profile, which makes the curve with straight ends to the two sides of the extrusion. The service is performed by means of laser pointing installed on the bending machines.

Press brake tools for machines: Accurl, Adira, AM Machinery, Amada, Augusta, Axial, Baykal, Boschert, Bystronic, CMU, CoastOne, Colgar, Colly, Gasparini, Gilardi, Gizelis, Guifil, Dener Makina, Deratech, Durma, Edward Pearson, Ermaksan, Euromac, Femas, Fratelli Farina, GADE, Gasparini, Gecko, HACO (Atlantic), Hammerle, Hesse, Hezinger, Hilalsan, IMAL, Inanlar, Ironmac, ITEK, Jean Perrot, Jordi, KAAST, Karmet, Kingsland, Knuth, LAG, Mecos, MVD, Muratec, Nargesa, OMAG, Peliant, Rico, Salvagnini, Schiavi, SMD, STR, Tabama, TCI etc. We supply solid pieces 415, 835 mm; section set (cutted) 805 mm and complete sets for the full length of your press brake. We can provide special press brake tools, study the projects and drawings, virtual simulation of bending process and study of the available tonnage and possible limitations of bending. All main press brake tools could be supplied within 1 working week. We are available to make quick and professional delivery to any part of European Union.

Press brake tools for machines: Bystronic-Hammerle, Durma, EHT, Finn-Power, Jordi, Gizelis, LVD, Trumpf, Prima Power, RICO PRCN, Safan-Darley, STR, Ursviken etc. We supply solid pieces 100, 200, 300, 500 mm; section set (cutted) 550 mm and complete sets for the full length of your press brake according to the customized pieces or the same as original tooling. For TRUMPF-WILA press brake tools we can offer 100% compatible tools as original. Dies could be used with Beyeler-Bystronic system. Any punches for Trumpf-Wila with low weight could be equipped with push buttons for quick frontal extraction. We can provide special press brake tools, study the projects and drawings, virtual simulation of bending process and study of the available tonnage and possible limitations of bending. All main press brake tools could be supplied within 1 working week. We are available to make quick and professional delivery to any part of European Union.

Bending film for press brake bending to protect from scratches, marks, imrints and other surface defects during bending polished materials, prepainted, grinded surfaces etc. together with die protection. Our bending film is premium quality, "Made in Germany". Could be used for bending of steel, stainless steel, aluminium alloys and any non ferrous metals and highly important for the usage in the production of decorative and prepared surface goods. The delivery program: * 0,4 x 100 mm width (length of roll 54 m) * 0,5 x 100 mm width (length of roll 45 m) * 0,8 x 100 mm width (length of roll 18 m) Width 150-200 mm ; 1,0 and 2,0 mm thickness film is available under request. The film could be used as it is with any tooling or press brake with manual positioning or usage of special holders to fix and to rotate after consume.

We offer special adjustable bending dies for various press brakes with medium and high tonnage for bending of big thickness sheet metal. These dies are great solution for the possibility to replace several set of standard dies and adjust die opening directly on the machine. Models available: V25-125; V65-180; V120-300; V150-400. In addition there are options of semi-automatic and automatic adjustment system. We are able to study the project for the possibility to offer together with adjustable dies all necessary punches as complete solution.

Special tools for customized applications and parts including forming, several bends in one stroke, controlled deformation, coining and stamping etc. The special press brake tools could be supplied for any press brake and system. We can also deliver as specials press brake tools for American style tools, LVD system, EHT system, COLLY - AJIAL system, HACO system and many others.