Results for
SCHNELL SPA
Italy
Bidirectional automatic stirrup bender from coil for the production of stirrups and cuttosize bars using wires up to Ø14 mm (#4). Driven by digital electric servomotors. Prima 14 automatic stirrup benders are equipped with Max. pulling speed 150 m/min (490 ft/min) Straighteners with independent position and adjustment displays for the 2 wires Cutting with Brushless motors Web Teleassistance.
Request for a quoteSCHNELL SPA
Italy
Bidirectional automatic stirrup bender from coil for the production of stirrups and cuttosize bars using wires up to Ø 14 mm (#4). Driven by digital electric servomotors. Formula 14 stirrup benders are equipped with Max. pulling speed 150 m/min (500 ft/min) Straighteners (horizontalsverticals) with electronic adjustment and independent position for the 2 wires with Joystick AntiTwist device (Optional) Cutting with Brushless motors Web Teleassistance
Request for a quoteSCHNELL SPA
Italy
Bidirectional automatic stirrup bender from coil with disk bending system for the production of stirrups and cuttosize bars using wires up to Ø 14 mm (#4). Driven by electric servomotors. Formula Disk automatic stirrup benders are equipped with Max. pulling speed 200 m/min (660 ft/min); Straighteners (horizontalsverticals) with electronic adjustment and independent position for the 2 wires with Joystick; AntiTwist device (Optional); Cutting with Brushless motors; Web Teleassistance.
Request for a quoteSCHNELL SPA
Italy
Bidirectional automatic stirrup bender from coil for the production of stirrups and cuttosize bars using wires up to Ø 16 mm (#5). Driven by digital electric servomotors. Also available HS version machine. Coil 16 automatic stirrup benders are equipped with Max. pulling speed 140 m/min (460 ft/min) HS Version 200 m/min (660 ft/min) AntiTwist device (Optional) 4 pulling drive wheels Cutting with Brushless motors with adjustable wire guide, reversible mobile and fixed cutting blades Pneumatic stirrup collector flap Web Teleassistance 3D version for the production of tridimensional pieces. COIL 16 Pack 1 N. 2 groups of straighteners (horizontalsverticals) with independent position and adjustment displays for the 2 wires.
Request for a quoteSCHNELL SPA
Italy
Single direction automatic stirrup bender from bar. It can produce stirrups and cuttosize bars from bars of ø 13 mm (#4) or double ø 10 mm (#3). Driven by electric servo motors. Possibility to produce upwards bends up to 90°. Smart 13 Bar automatic stirrup benders are equipped with a device for the production of "bottlenecks".
Request for a quoteSCHNELL SPA
Italy
Bidirectional automatic stirrup bender from bar, allows to produce stirrups and cuttosize bars using wires up to Ø 22 mm (#7). Driven by electric servomotors. Bar Wiser 22N stirrup benders are equipped with Max. pulling speed 120 m/min (400 ft/min) Virtual mandrel Web Teleassistance Automatic loader Genius (Optional)
Request for a quoteSCHNELL SPA
Italy
Automatic dual directional stirrup bender for the production of stirrups from straight bars (up to Ø 22 mm #7) or coils (up to Ø 16 mm #5). Driven by electric servomotors. Bar Wiser 22N Multifeed automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Virtual mandrel Web Teleassistance
Request for a quoteSCHNELL SPA
Italy
Stirrup bender and bar shaping machine from coil with disk bending system for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 14 mm (#4). Driven by electric servomotors. This automatic shaping and stirrup bender from coil is equipped with Max. pulling speed 150 m/min (500 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick Disk bending unit Cutting with Brushless motors Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance
Request for a quoteSCHNELL SPA
Italy
Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 20 mm (#6). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 140 m/min (460 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick AntiTwist electronic device (Optional) Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit (upper and lower) Pulling with 4 motors and 4 pulling drive wheels Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Prestraightening Feeding Unit (Optional) Automatic motorized wire change (Optional) 3D version for the production of tridimensional pieces.
Request for a quoteSCHNELL SPA
Italy
Stirrup bender and bar shaping machine from coil with 2 bending heads, allows to produce stirrups and shaped wires with bends at both ends using wires up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 160 m/min (525 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit Automatic motorized wire change Automatic adjustable wireguide Web Teleassistance Prestraightening Feeding Unit (Optional).
Request for a quoteSCHNELL SPA
Italy
Multirotor straightening and shaping machine using coils up to Ø 20mm for the production of straight bars, large stirrups and shapes with bends on both ends. 4 wheel drive pulling unit driven by servomotors for high speed production; Maximum pulling speed 140 m/minute; The straightening system uses rotors, each one dedicated to a single bar diameter which guarantees perfectly straight bars and wire diameter changes in just a few seconds; Servomotor driven cutting unit guarantees high speed and high cutting accuracy; 2 bidirectional bending units work “offline” so the bars are bent in “masked time”; Automatic bending tooling changeover for higher productivity; Indexing carriage for the automatic collection and sorting of the bars produced.
Request for a quoteSCHNELL SPA
Italy
Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 22 mm (#7). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces.
Request for a quoteSCHNELL SPA
Italy
Bidirectional automatic stirrup bender for the production of stirrups and shaped wires both from bars (up to Ø 22 mm #7) and from coils (up to Ø 16 mm #5). The lower bending unit performs downward bends. Driven by electric servomotors. These automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Semiautomatic cycle for shaped wires with bends on both ends Barholding clamp for downward bends Virtual mandrel for the upper processing unit Web Teleassistance
Request for a quoteSCHNELL SPA
Italy
Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces.
Request for a quoteSCHNELL SPA
Italy
Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Bar Wiser 28 Pack 0 Storage rack pneumatically operated.
Request for a quoteSCHNELL SPA
Italy
Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 32 mm (#10). Driven by digital electric servomotors. Bar Wiser 32 bar shaping machine are equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional)
Request for a quoteSCHNELL SPA
Italy
Thanks to its innovating system, SBL takes, counts and moves the bars for shearline feeding in a completely automatic way. With SBL you save money and enhance productivity due to its flexibility. Advantages 1. ‘SBL’ is extremely fast so it can feed more bars compared with manual feeding. The result is higher productivity per hour for any kind of shear line. 2. No need of hard and dangerous bar handling so no need of people for such operation resulting in great money saving. 3. The elimination of manual bar feeding enhances security at job site. 4. “SBL” special structure makes it possible to feed shearlines with higher a number of bars of different diameter and length resulting in a. drastic reduction in machine setup; b. plant overall dimensions determined by clients’ room available; c. higher flexibility of the plant.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SCHNELL SPA
Italy
Integrated plant to cut, optimize, stock and handle the bars, suitable for mass productions, based on a shear CGS 300, mounted on a mobile frame, with blade of 300 mm (12''), VMT measuring and cutting track to cut the bars to size and unload them on the right or left. In the VMT SUPERFAST version, the roller conveyors and the unloading systems are divided into two parts individually operated. This ensures a much faster working cycle.
Request for a quoteSCHNELL SPA
Italy
Integrated plant to cut, optimize, stock and handle the bars, suitable for mass productions, based on a shear CGS 500, mounted on a mobile frame, with blade of 500 mm (20''), VMT measuring and cutting track to cut the bars to size and unload them on the right or left. In the VMT SUPERFAST version, the roller conveyors and the unloading systems are divided into two parts individually operated. This ensures a much faster working cycle.
Request for a quoteSCHNELL SPA
Italy
Stationary bars measuring and cutting plant, with shear operated by servomotor. It has a second transfer rack parallel to the cutting unit. This way, cut bars can be placed on the whole length of the racks optimizing the use. This system enables a better cutting optimization, reducing the amount of scraps. Electromechanical feeding and cutting head; Feeding by means of servomotor; Console with graphic colored touch screen LCD 8’’.
Request for a quoteSCHNELL SPA
Italy
Electromechanical automatic rebar cutting bench with 6 transfer roller conveyors. The cutting bench 'BAT 6' represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Thanks to 6 different chambers optimise processing of small orders even without the transfer unit. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance.
Request for a quoteSCHNELL SPA
Italy
Electromechanical automatic bar cutting bench with 5 transfer roller tracks and a second additional rebar conveyor. Thanks to the second transfer track, parallel to the cutting unit, cutbars can be placed along the whole length of the roller track optimizing the use. This means that the same roller track can be used to store different orders. Basically, it is as if you had a much greater number of roller tracks allowing a better cutting optimization thus reducing the quantity of scraps. The bar cutting bench "OPTIBAT 5" represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance.
Request for a quoteSCHNELL SPA
Italy
Integrated plant to cut and stock precut bars made of fast automatic straighteners with rollers (such as RETA) and coil processing up to Ø 20 mm. Pulling speed up to 300 m/min. The plant is fully customizable and modular thanks to a wide range of available accessories. Fast Coil change patented system of automatic horizontal wire change (Optional); Straighteners (horizontalvertical) with electronic and independent setting for double wire feeding; Cutting with Brushless motors with adjustable wire guide, fixed and mobile cutting blades; Rollers for the extraction of the last part of the coil; Teleassistance.
Request for a quoteSCHNELL SPA
Italy
Automatic bar bending machine for the production of shapes with positive bends (“L”, “C” and double “C”), up to Ø 40 mm (#11). Device for the production of "bottlenecks“. Automatic system for bars feeding and discharging.
Request for a quoteSCHNELL SPA
Italy
Automatic rebar bending machine for bars up to Ø 40 mm. It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging 2 adjustable bending speeds
Request for a quoteSCHNELL SPA
Italy
Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part Operation by means of digital electric servomotors 4 adjustable bending speeds
Request for a quoteSCHNELL SPA
Italy
Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Version with automatic feeding and discharging units, which fold away (Optional) they allow the minimum distance of 980 mm between the two bending mandrels. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part the positions of the clamps and guides on the kick off arms and their adjustment are motorized and automatic Operation by means of digital electric servomotors 4 adjustable bending speeds
Request for a quoteSCHNELL SPA
Italy
Fast automatic wire straightening machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4), equipped with Senso Technology.
Request for a quoteSCHNELL SPA
Italy
Automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4). Driven by digital electric servomotors. Capacity 2 Ø 10 mm (#3) Max pulling speed 150 m/min (495 ft/min) Straighteners with independent position and adjustment displays for the wires Cutting with Brushless Motorized wire change unit Web Teleassistance
Request for a quoteResults for
Tools for machining - Import exportNumber of results
85 ProductsCountries
Company type