Results for
SCHNELL SPA
Italy
Bidirectional automatic stirrup bender for the production of stirrups and shaped wires both from bars (up to Ø 22 mm #7) and from coils (up to Ø 16 mm #5). The lower bending unit performs downward bends. Driven by electric servomotors. These automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Semiautomatic cycle for shaped wires with bends on both ends Barholding clamp for downward bends Virtual mandrel for the upper processing unit Web Teleassistance
Request for a quoteSCHNELL SPA
Italy
Electromechanical automatic rebar cutting bench with 3 transfer roller conveyors. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance.
Request for a quoteSCHNELL SPA
Italy
Electromechanical mesh cutting machine. It cuts in two directions thanks to the two kW 3 cutting motors, a kW 0.75 press motor and a kW 0.55 feeding motor. It is equipped with Reinforced framework; Continuous shear cutting unit; Rubber inlaid meshpressing beam.
Request for a quoteSCHNELL SPA
Italy
Mesh welding machine for the production of electrowelded mesh fed by wires. The automatic wire mesh welding machine can manufacture electrowelded mesh from prestraightened wire, both longitudinal and transversal. The mesh maximum width is equal to 1250 mm, the length is variable between 2000 mm and 6000 mm. These electrowelded mesh are used for the production of prefabricated sandwich panels.
Request for a quoteSCHNELL SPA
Italy
Rotor type wire straightening machine for the production of cuttosize wires up to Ø 6 mm (#3). Driven by digital electric servomotors. Max pulling speed 160 m/ min (525 ft/ min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm).
Request for a quoteSCHNELL SPA
Italy
The rotor type wire straightening machine RI 12 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 4mm to Ø 12mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 12/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional
Request for a quoteSCHNELL SPA
Italy
The rotor type wire straightening machine RI 8 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 3mm to Ø 8mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 8/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional
Request for a quoteSCHNELL SPA
Italy
The rotor type wire straightening machine RI 6 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 2,5mm to Ø 6mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market
Request for a quoteSCHNELL SPA
Italy
Rotor type wire straightening machine for the production of cuttosize wires up to Ø 12 mm (#3). Driven by digital electric servomotors. Max pulling speed 160 m/ min (525 ft/ min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m).
Request for a quoteSCHNELL SPA
Italy
Rotor type wire straightening machine for the production of cuttosize wires up to Ø 8 mm (0.315 in.). Driven by digital electric servomotors. Max pulling speed 160 m/min (525 ft/min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Fixed cut with automatic backstop length for a maximum cutting flexibility (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m).
Request for a quoteSCHNELL SPA
Italy
STRETCH DRIVE MO is a Cold Rolling and Stretching Line with single horizontal drawing capstan for the production of both smooth and ribbed, colddrawn wire with low carbon content and hot rolled high ductility ribbed wire. Stretching Process Stretch Drive MO 6 16 mm (8 m/s) Cold Rolling Process Stretch Drive MO Cold 1 4,5 12 mm (8 m/s) Stretch Drive MO Cold 2 4 12 mm (8 m/s)
Request for a quoteSCHNELL SPA
Italy
The Combidrive MO is a cold rolling line with single horizontal drawing capstan for the production of smooth and ribbed wires in bars from Ø 4 to Ø 12 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Wire is rolled to reduce the section and if necessary ribbed, then straightened and cut according to the different lengths scheduled. Rotating cut system to ensure continuous production Max. pulling speed (straight bars production) 6 m/s Max. pulling speed (coil production) 8 m/s Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s)
Request for a quoteSCHNELL SPA
Italy
The Coldrive MO is a cold rolling line with single horizontal drawing capstan for the production of smooth and ribbed wires from Ø 4 to Ø 16 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 8 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous vector motor" low consumption, high power User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Multipass line and multiple vertical drawing capstan 2MV 3,4 12 mm (12 m/s) 3MV 3,4 10 mm (16 m/s) 4MV 3 8 mm (16 m/s) “Coldrive” MO with single horizontal drawing capstan MO 4,5 12 mm (8 m/s) MO 4 12 mm (8 m/s)
Request for a quoteSCHNELL SPA
Italy
The “Coldrive” 4MV is a cold rolling line with multiple vertical drawing capstan for the production of smooth and ribbed wires from Ø 3 to Ø 8 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 16 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Multipass line and multiple vertical drawing capstan 2MV 3,4 12 mm (12 m/s) 3MV 3,4 10 mm (16 m/s) “Coldrive” MO with single horizontal drawing capstan MO 4,5 12 mm (8 m/s) MO 4 12 mm (8 m/s) MO 4 16 mm (8 m/s)
Request for a quoteSCHNELL SPA
Italy
The “Coldrive” 3MV is a cold rolling line with multiple vertical drawing capstan for the production of smooth and ribbed wires from Ø 3,4 to Ø 10 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 16 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Multipass line and multiple vertical drawing capstan 2MV 3,4 12 mm (12 m/s) 4MV 3 8 mm (16 m/s) “Coldrive” MO with single horizontal drawing capstan MO 4,5 12 mm (8 m/s) MO 4 12 mm (8 m/s) MO 4 16 mm (8 m/s)
Request for a quoteSCHNELL SPA
Italy
The “Coldrive” 2MV is a cold rolling line with multiple vertical drawing capstan for the production of smooth and ribbed wires from Ø 3,4 to Ø 12 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 12 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Line at 1 or 2 passes with single vertical drawing capstan MV 4 12 mm (12 m/s) Multipass line and multiple vertical drawing capstan 3MV 3,4 10 mm (16 m/s) 4MV 3 8 mm (16 m/s)
Request for a quoteSCHNELL SPA
Italy
The Coldrive MV is a cold rolling line with single vertical drawing capstan for the production of smooth and ribbed wires from Ø 4 to Ø 12 mm. This cold drawing line is completely modular and the rolling process is made through drawing capstan and rollers cassettes for rolling/profiling. Driven by electric asynchronous servomotors digitally controlled. Max. pulling speed 12 m/s (higher speeds on demand) Compact Layout Highly customizable "Asynchronous servomotor" low highpower consumption User friendly software for cold rolling process management Web Teleassistance Other cold rolling lines Multipass line and multiple vertical drawing capstan 2MV 3,4 12 mm (12 m/s) 3MV 3,4 10 mm (16 m/s) 4MV 3 8 mm (16 m/s) “Coldrive” MO with single horizontal drawing capstan MO 4,5 12 mm (8 m/s) MO 4 12 mm (8 m/s) MO 4 16 mm (8 m/s)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SCHNELL SPA
Italy
Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 45 mm (#14) Plate revolving speed 5÷12 RPM Equipped with electronic programmer up to 50 bends
Request for a quoteSCHNELL SPA
Italy
Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 36 mm (#11) Plate revolving speed 8 RPM
Request for a quoteSCHNELL SPA
Italy
Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 32 mm (#10) Plate revolving speed 9 RPM
Request for a quoteSCHNELL SPA
Italy
Rebar cutting machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 45 mm (#14) 50 cuts/minute
Request for a quoteSCHNELL SPA
Italy
Rebar shearing machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 40 mm (#11) 50 cuts/minute
Request for a quoteSCHNELL SPA
Italy
Rebar cutting machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 36 mm 60 cuts/minute
Request for a quoteSCHNELL SPA
Italy
Rebar shearing machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 32 mm 90 cuts/minute
Request for a quoteSCHNELL SPA
Italy
Rebar cutting machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 26 mm 100 cuts/minute
Request for a quoteSCHNELL SPA
Italy
Automatic steel ring bending machine for the production of circles, spirals and radius bars for diameters from Ø 6 mm (#3) to Ø 40 mm (#14). The machine uses a system of 4 rollers, one of which is specifically to ensure the stability and consistency of the radius of the curve. The rebar combined machine CER40 can be programmed to produce automatically up to 5 different radius curves on the same bar thanks to the measuring system.
Request for a quoteSCHNELL SPA
Italy
Four speed dualdirection bar bending machine. It doesn't pull the bars during bending operations. Driven by digital electric servomotors. Industrial PC equipped with touch screen graphic display 8'', which allows Programming stirrups and shapes with up to 30 bends; Adjusting bending angles; Storing up to 100 different shapes.
Request for a quoteSCHNELL SPA
Italy
Dualdirection bar bending machine with threespeeds selfbraking motor driven by inverter. The machine doesn't pull the bars during bending operations. The equipment is driven by a selfbraking motor. Electronic digital programmer mod. 'KS31' which allows Programming stirrups and shapes with up to 30 bends; Adjusting bending angles; Storing up to 50 different shapes.
Request for a quoteSCHNELL SPA
Italy
Rebar cutting machine with safety cutting system apt to process steel in bars. Cutting antirepetitiveness system. Capacity 1 bar Ø 36 mm (#11) 15 cuts per minute
Request for a quoteResults for
Cutting machines - Import exportNumber of results
87 ProductsCountries
Company type