Automatic bars - Import export

Thanks to its innovating system, SBL takes, counts and moves the bars for shearline feeding in a completely automatic way. With SBL you save money and enhance productivity due to its flexibility. Advantages 1. ‘SBL’ is extremely fast so it can feed more bars compared with manual feeding. The result is higher productivity per hour for any kind of shear line. 2. No need of hard and dangerous bar handling so no need of people for such operation resulting in great money saving. 3. The elimination of manual bar feeding enhances security at job site. 4. “SBL” special structure makes it possible to feed shearlines with higher a number of bars of different diameter and length resulting in a. drastic reduction in machine setup; b. plant overall dimensions determined by clients’ room available; c. higher flexibility of the plant.

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 32 mm (#10). Driven by digital electric servomotors. Bar Wiser 32 bar shaping machine are equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional)

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Bar Wiser 28 Pack 0 Storage rack pneumatically operated.

Single direction automatic stirrup bender from bar. It can produce stirrups and cuttosize bars from bars of ø 13 mm (#4) or double ø 10 mm (#3). Driven by electric servo motors. Possibility to produce upwards bends up to 90°. Smart 13 Bar automatic stirrup benders are equipped with a device for the production of "bottlenecks".

Electromechanical automatic bar cutting bench with 5 transfer roller tracks and a second additional rebar conveyor. Thanks to the second transfer track, parallel to the cutting unit, cutbars can be placed along the whole length of the roller track optimizing the use. This means that the same roller track can be used to store different orders. Basically, it is as if you had a much greater number of roller tracks allowing a better cutting optimization thus reducing the quantity of scraps. The bar cutting bench "OPTIBAT 5" represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance.

Bidirectional automatic stirrup bender from bar, allows to produce stirrups and cuttosize bars using wires up to Ø 22 mm (#7). Driven by electric servomotors. Bar Wiser 22N stirrup benders are equipped with Max. pulling speed 120 m/min (400 ft/min) Virtual mandrel Web Teleassistance Automatic loader Genius (Optional)

Automatic bar bending machine for the production of shapes with positive bends (“L”, “C” and double “C”), up to Ø 40 mm (#11). Device for the production of "bottlenecks“. Automatic system for bars feeding and discharging.

Bidirectional automatic stirrup bender for the production of stirrups and shaped wires both from bars (up to Ø 22 mm #7) and from coils (up to Ø 16 mm #5). The lower bending unit performs downward bends. Driven by electric servomotors. These automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Semiautomatic cycle for shaped wires with bends on both ends Barholding clamp for downward bends Virtual mandrel for the upper processing unit Web Teleassistance

Automatic dual directional stirrup bender for the production of stirrups from straight bars (up to Ø 22 mm #7) or coils (up to Ø 16 mm #5). Driven by electric servomotors. Bar Wiser 22N Multifeed automatic stirrup benders are equipped with Max. pulling speed 100 m/min (330 ft/min) External and internal straightening unit Virtual mandrel Web Teleassistance

Automatic plant for the production of calendered bars from Ø 12mm to Ø 40mm. The bars are automatically selected, positioned, transferred to the calendering machine, calendered and then unloaded without the need for operator intervention. The calendering center COMPASS 40 guarantees the insertion of the bars always oriented in the same way; automatic control of the bending radius; an automatic manufacturing process; greater safety for the operator. COMPASS 40 can operate in 3 ways Automatic with single bar it allows automatic feeding of the bar and electronic check of the produced bar bending radius; Automatic with multiple bars it allows the automatic feeding of the bars without checking the bending radius; Manual with the same features of a CER40 calendering machine. Bars calendering is mainly used in the construction of foundations for wind turbines or tunnels (those not made with prefabricated elements).

Automatic rebar bending machine for bars up to Ø 40 mm. It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging 2 adjustable bending speeds

Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Version with automatic feeding and discharging units, which fold away (Optional) they allow the minimum distance of 980 mm between the two bending mandrels. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part the positions of the clamps and guides on the kick off arms and their adjustment are motorized and automatic Operation by means of digital electric servomotors 4 adjustable bending speeds

Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part Operation by means of digital electric servomotors 4 adjustable bending speeds

Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 20 mm (#6). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 140 m/min (460 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick AntiTwist electronic device (Optional) Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit (upper and lower) Pulling with 4 motors and 4 pulling drive wheels Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Prestraightening Feeding Unit (Optional) Automatic motorized wire change (Optional) 3D version for the production of tridimensional pieces.

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces.

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 22 mm (#7). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces.

Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 16 mm (#5). Driven by electric servomotors. Also available HS version machine. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 140 m/min (460 ft/min) HS Version 200 m/min (660 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick AntiTwist electronic device (Optional) Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit (upper and lower) 4 pulling drive wheels Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance 3D version for the production of tridimensional pieces.