Io link - Import export

The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.

The electronic pressure switch DS 350 is interesting for all users in plant and machine engineering, due to the integrated IO-Link interface to exchange process data, diagnostic reports and status messages with a superordinate control level, as standard. In addition, further information can be retrieved that allow conclusions to the application process. Especially in mechanical engineering, great demand for flexible operating conditions have to be satisfied. Features — Nominal pressure from 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.5% / 0.35 % (opt. 0.25 %) FSO — IO-Link according to specification V 1.1 — smart sensor profile — data transfer 38.4 kBaud — indication of measured values on a 4-digit LED display — rotatable and configurable display module — parameter settings via IO-Link or menu (VDMA-conform) — additional information via IO-Link accessible Optional features — different mechanical connections

— High switching frequencies up to 1000 kHz — Fully encapsulated versions to protection class IP67 — Sturdy metal enclosure — Temperature range: -25°C up to +70°C — Sensing distances: 5 mm up to 16 mm — 10 – 36 V DC or 20-250 V AC — PNP / NPN versions — NO / NC versions — Cable / connector versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

— Flush and non-flush mount sensors in stainless steel enclosure 1.4305 — High switching frequencies up to 1000 kHz — Fully encapsulated versions to protection class IP67 — Temperature range: -25°C up to +70°C — Sensing distances: 1 mm up to 2 mm — Cable / connector versions — 10 – 36 V DC — PNP / NPN versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

— AC and DC sensors available — High switching frequencies up to 4000 kHz — Fully encapsulated versions to protection class IP67 — Sturdy metal or plastic enclosures — Temperature range: -25°C up to +70°C — Sensing distances: 2 mm to 8 mm — Cable / connector versions — 10 – 36 V DC or 76-250 V AC — PNP / NPN versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

— Versions for flush and non-flush mounting — AC and DC sensors available — High switching frequencies up to 300 kHz — Fully encapsulated versions to protection class IP67 — Sturdy metal and plastic enclosure — Temperature range: -25°C up to +70°C or -40°C up to +100°C — Sensing distances: 10 mm up to 15 mm — Cable / connector versions — 10 – 36 V DC or 20-250 V AC — PNP / NPN or AC versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

The temperature transmitter PA2530 with mit IO-Link is suitable for hygienic temperature measurement in connection with the following resistance thermometers ■ MiniTherm, Type series GA27 (see data sheet T4-014, T4-015 and T4-017) ■ Clamp-on, Type series GA2610 (see data sheet T4-028) Due to its compact design the transmitter fulfils the hygienic requirements of plant and machinery engineering.

The temperature transmitter PA2530 with mit IO-Link is suitable for hygienic temperature measurement in connection with the following resistance thermometers ■ LABOM MiniTherm, Type series GA27 (see data sheet T4-014, T4-015 and T4-017) ■ LABOM Clamp-on, Type series GA2610 (see data sheet T4-028) Due to its compact design the transmitter fulfils the hygienic requirements of plant and machinery engineering.

Special design of through-beam sensor. Transmitter and receiver are located in the fork or angular limbs and are perfectly aligned to each other.

The DCT 533P is suitable for food / beverage and pharmaceutical industry as well as, for applications where a totally flush pressure port is required. The special design prevents condensation inside the pressure transmitter and thus a failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Properties can be read and qualified via IO-Link, which helps the user to assess the state of system or process. Features: — nom. pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygenic version — CIP / SIP cleaning up to 150 °C — ingress protection Ip 67 / IP 69 — diaphragm with low surface roughness Optional Features: — cooling element for media temp. up to 300 °C — different process connections

The pressure transmitter DCT 553P is used in the food and pharmaceutical industries or in applications where a dead space-free process connection is required. A capacitive ceramic pressure sensor developed in-house is used as the basic sensor, which is characterized by a high overload and excellent surface quality. The special design prevents the formation of condensation inside the pressure transmitter and thus failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygienic version — protection IP 67/ IP 69 — high overpressure resistance — diaphragm ceramics Al2O3 (99.9 %) Optional: — different process connections

For safety-related applications, we offer IP67 block I/O modules with safe digital inputs and universal digital channels that can be used as inputs or outputs. The modules also feature non-safe universal digital channels and IO-Link master ports. This allows connection of standard I/Os and IO-Link devices to an IP67 fieldbus module - in addition to the safety inputs and outputs. Via the IO-Link IO hubs, up to 32 more universal digital signals can be connected.

Our pressure sensors detect relative or absolute pressures in liquids and gases. The PS series offers pressure sensors with display and various output variants (switching and analog output) and communication via IO-Link. The PT series includes pressure sensors without display with analog output for media temperatures up to -125 °C. The PC series offers communication via IO-Link. The sensors of the PK-series are especially designed for pneumatic and vacuum applications.

Our rugged inclinometers of the Q20L60 and Q42 series capture almost any inclination and can also be used in systems implementing fast motions or subjected to shocks. We offer sensors for angular ranges of ±10°, ±45°, ±60° and ±85° as well as with freely selectable measuring range 0…360°. The following output variants are available: 4…20 mA, 0.1…4.9 V, 0…10 V, PNP/NPN window as NC or NO contact, IO-Link, CANopen.

The bus-compatible AP10 position indicator serves for monitored format adjustment in order to reduce setup times and enhance machine efficiency.Readability has been optimized to achieve intuitive user guidance. The backlit display clearly indicates target and actual values  two-row position indicator for representing target and actual values and the two LEDs clearly show the direction to be set.  Electronic position indicator with bus interface. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Backlit display. Two-line LCD for target and actual values. Reset, incremental measurement, offset via keyboard. Integrated RS485 interface, CAN bus or IO-Link as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S position indicator. IP53 type of protection, IP65 as an option.

Die Idee und das Ziel von Industrie 4.0 ist es, in Echtzeit alle relevanten Daten innerhalb von Wertschöpfungsprozessen zu gewinnen, um daraus Optimierungen hinsichtlich Kosten, Ressourcenbedarf und Verfügbarkeit abzuleiten. Dies ist möglich, wenn alle an diesem Prozess beteiligten Komponenten vernetzt sind und die notwendige Information für Bewertung und Aktion bereitstellen. Ein wichtiger Faktor sind dabei Sensoren, die Zustände innerhalb von Fertigungsprozessen und Anlagen erfassen und diese an übergeordnete Systeme wie Steuerungen kommunizieren. Die Standardisierung dieser Kommunikation ist außerordentlich sinnvoll. Novotechnik bietet dazu Weg- und Winkelsensoren mit dem herstellerunabhängigen Kommunikationsstandard IO-Link an, welcher die Eigenschaften intelligenter Sensoren voll nutzbar macht. IO-Link kann über Gateways in unterschiedlichste Bussysteme implementiert werden und ermöglicht über intelligente Diagnose- und Parametrierungskonzepte eine deutliche...

High-performance compact actuator for complex positioning jobs Space-saving, easy mounting. Through hollow shafts up to max. ø14 mm. Brushless 50 W, 24 V EC motor with long service life. Integrated power and control electronics with inverse polarity and overload protection. Integrated absolute position encoder on the output shaft. Integrated CANopen or Profibus-DP with M12 component mounting technology. Integrated RS458/SIKONETZ5 interface with M8 component mounting technology. With IO-Link

The sensor technology of the DCT 533 is the same as those of the proven pressure transmitter DMP 331 / DMP 333, whereby the DCT 533 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 533 to different conditions on-site. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0,35 % (opt. 0,25%) FSO — IO-Link according to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — perfect thermal behaviour — excellent long term stability Optional Features: — pressure port G 1/2" flush from 100 mbar — pressure sensor welded — customer specific versions

The GEMÜ 1235 electrical position indicator is suitable for mounting to pneumatically operated linear actuators. The position of the valve spindle is electronically detected and evaluated through play-free and non-positive mounting. Intelligent microprocessor controlled functions make commissioning and support during operation easier. The current position of the valve is displayed via high-visibility LEDs and fed back via electrical signals. The GEMÜ 1235 has been specially designed for valves of small, medium and large nominal sizes with a stroke of 2.2 to 74.4 mm. — Communication and programming interface IO-Link — Adjustable switch point tolerances — Speed-AP function for fast mounting and initialisation — High visibility position indicator by LED — Can be fitted to GEMÜ valves or third-party actuators — On-site or remote end position programming via programming input

Whether made by a robot or by human hand, wherever things are produced or joined together, you need professional skills, concentration – and above all, good lighting conditions. LINURA.edge delivers powerful, homogeneous white light to monitor processes without specific spectral requirements, for example in assembly systems. Perfect illumination for perfect results. — White light (5000 K/Ra > 80) for the illumination of various types of production processes — ADVANCED package for powerless switching, progressive dimming and automatic dimming when temperature limits are exceeded (at Ta > 50° C) (variants) — Through-wiring for electrical interlinking of several luminaires (variants) — IO-Link interface for the configuration and control of lighting functions such as switching, dimming and flashing, as well as for evaluating diagnostic information and error messages (variants)

The linear transducer model PWA measures the absolute position of the plunger without contact or wear using an inductive resonator measuring system. This consists of an excitation coil which causes an oscillating resonance circuit (moving target) fastened to the plunger to oscillate. This in turn excites the receiver coils fixed in the housing, which are printed on a printed circuit board. The integrated electronics transform these signals (sin/cos) into a signal proportionate to the linear travel. The measuring system is insensitive to electrical and magnetic fields. 0(4) to 20 mA and 0 to 10 VDC are available as standard as analogue signal outputs. CANopen, IO link and SSI are in preparation. The sensor is fastened using at least two retaining clips HK-01 or using sliding blocks ST-01. The sensor can be equipped with ball joints at the front and rear. Alternatively, the sensor's plunger can be designed as a button.

The compact thermometer measures the process temperature using a Pt100 sensor element (Class A, 4-wire). An optional integrated transmitter converts the Pt100 input signal. In the version with integrated electronics, the device automatically detects the connection variant (IO-Link or 4–20 mA).

The Nivector FTI26 is a cost-efficient point level switch for solids in the food industry and powder applications in all industries. The capacitance device convinces with the best build-up performance in class and a high sensitivity. All industry compliant certificates are available. In addition, the FTI26 is industry 4.0 ready with IO-Link communication.

The Ceraphant PTP33B is a price-attractive pressure switch with metal diaphragm for safe measurement and monitoring of absolute and gauge pressure. The pressure switch with compact design is extremely stable and overload resistant. PTP33B with stainless steal housing is 3-A and EHEDG approved. The IO-Link capability allows easy integration and parametrization of the device.

The Ceraphant PTP31B is a price-attractive pressure switch with piezoresistive sensor for safe measurement and monitoring of absolute and gauge pressure. The pressure switch with compact design is extremely stable and overload resistant for up to +400 bar. The IO-Link capability allows easy integration and parametrization of the device.

The PSE 31x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link). Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link).

Positioning system with protection class IP 65 for damp area applications The PSS 31x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes with hygienic design. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. Two bus connections are available for looping the bus signal (not for IO-Link). Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link).

The PSE 30x-8 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and bus interface. The absolute measuring system eliminates the need for time-consuming reference runs. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module. Address and baud rate switches simplify start-up. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link). Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link).

PSD 48 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is ideal for automatic format changeover. The stepper motor with integrated control and bus communication permits higher velocities at lower torques. The PSD can be easily addressed by rotary switches (not for IO-Link). The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. The optional rotatable attachment housing allows you to attach the direct drives to the machine in any position, no angle plugs are required.