International protection - Import export

As Natrolabs, we set out in 2015 to close the gap in the market and to contribute to our country and people. We export mainly to Iraq, Libya, Switzerland, England, Netherlands, Germany, France, Bosnia-Herzegovina, Azerbaijan, Syria, Kuwait, Saudi Arabia, Vietnam, Sudan, UAE, Ethiopia and Yemen. Natrolabs; the knowledge and experience he has gained so far; We offer innovative ideas and technology-supported product forms to the use of the consumer. By using the unlimited resources that nature offers us, we make contract manufacturing in our fully integrated facility with a closed area of ​​approximately 3,000 square meters in Tuzla-Tepeören, Istanbul, and we provide added value to our country by providing employment with our exports. We aim to grow both in the domestic and international markets with our natural, protective and health-supporting products by producing Food Supplements and Dermo Cosmetics with our expert technical team.

Compact Rail is a linear system consisting of steel linear rails with induction hardened raceways and high precision radial ball bearing sliders, also made of hardened steel. Thanks to their self-aligning capabilities, Compact Rail linear guides simplify the project, improve the performance and reduce the overall cost of application. Compact Rail linear guides are easy to install on all types of surfaces, including non-machined ones. Compact Rail linear guides feature a robust steel slider with ball bearings, self-centering heads with wipers, longitudinal seals to protect the internal components and a top sealing strip. The slider body is accurately finished with matte longitudinal edge chamfer and a shining ground flat surface. The slider heads are equipped with special slow release felt pads and are free to rotate with respect to the slider body, so that the felts are always in contact with the raceways to ensure optimal lubrication.

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

Closures, more commonly known as shields and seals are used to protect the internal parts of the bearing against dust, liquid, and gaseous particle contamination. The shields help contain the lubricant in the bearing but are not designed to keep out liquid and gaseous contamination. We manufacture our own shields at WIB to the precise tolerance to minimize the opening gap, thereby offering great grease retention and longer life. On the other hand, seals are designed to keep various types of contamination out, keeping the grease clear of foreign particles and extending the bearing life.

Qzer mouds blue flos patterned quality FFP2 mask brand new and high quality breathable material which makes it useful. Special several ply nonwoven design, provides some protections against dust, automobile exhaust, pollen.Elastic ear loop, easy to wear and no pressure to the ears. Inner layer is made of soft facial tissue, no dye, gentle to the skin.Perfect for outdoor, any other areas where protection might be required.A FFP2 mask is a type of respirator that meets certain international standards. It offers more protection than a medical mask does because it filters out both large and small particles when the wearer inhales.However, be cautious when buying . as many fake masks are sold that don't meet quality requirements.

Qzer mouds one line art patterned quality FFP2 mask brand new and high quality breathable material which makes it useful. Special several ply nonwoven design, provides some protections against dust, automobile exhaust, pollen.Elastic ear loop, easy to wear and no pressure to the ears. Inner layer is made of soft facial tissue, no dye, gentle to the skin.Perfect for outdoor, any other areas where protection might be required.A FFP2 mask is a type of respirator that meets certain international standards. It offers more protection than a medical mask does because it filters out both large and small particles when the wearer inhales.However, be cautious when buying . as many fake masks are sold that don't meet quality requirements.

Qzer mouds series sweet flower patterned quality FFP2 mask brand new and high quality breathable material which makes it useful. Special several ply nonwoven design, provides some protections against dust, automobile exhaust, pollen.Elastic ear loop, easy to wear and no pressure to the ears. Inner layer is made of soft facial tissue, no dye, gentle to the skin.Perfect for outdoor, any other areas where protection might be required.A FFP2 mask is a type of respirator that meets certain international standards. It offers more protection than a medical mask does because it filters out both large and small particles when the wearer inhales.However, be cautious when buying . as many fake masks are sold that don't meet quality requirements.

We are leading suppliers of best quality A4 copy paper 80gsm, 75gsm,70gsm and looking for serious buyers in need of our papers contact us with your full details for more information on our product. We supply A4 Copy Paper of various brands with the following specifications: Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes printing and copying. Moist protected wrapper Size * International standard * A4: 210 x 297mm * A3: 420 x 297mm * 8.5 x 11-inch (216 x 279mm) * 8.5 x 14-inch (216 x 330mm)

With internally protected sealing lip. With O‑ring for sealing in the groove base. For high peripheral speed and increased chemical resistance

Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate

Stronger protection from contamination for pipetters and samples POREX® Pipette Cone Filters help prevent samples, and the pipette’s internal mechanisms and components, from fluid and liquid vapor contamination. Used at the pipette shaft base, these inert, hydrophobic filter tips are optimized for fit, function, resilience, and porosity. Backed by the Certified Pure Porex™ program, our filter tips: Protect pipetter’s internal components –Serves as a final interferent barrier. Prevent contamination–Protects against aerosols and sample cross-contamination. Prolongs product lifetime–Reduces chance for contamination which lowers the need for pipetter maintenance.

Windows connect with internal comfort, so safety and protection are the most important features, but they are also defining for the style of your home. The Rehau Euro Design 70 profile offers you a good price-quality ratio and a varied color range. Adancime Constructiva 70 mm Numar de camere: Toc 5 camere Cercevea 5 camere Garnituri Garnituri sustinere sticla 2 Garnituri etansare 2 Garnitura mediana 0 Grosimea maximă a vitrajului 41 mm Coeficient de transfer termic Uw pana la 1,3 (W/m²K) Izolare acustica maxima Rw = 45 dB Permeabilitate la aer Clasa 4 Etanseitate la apa Clasa 9A Rezistenta la vant Clasa B5 Protectie anti-efractie RC2

The new Eco-Arc II helmet is the latest achievement in the field of passive visors with a raised visor. Thanks to its lightweight body, polypropylene body and perfect face protection, this visor is suitable for all types of positional welding. Available in three options of a raised cover, this visor is also equipped with a new Eco Head Gear head with five degrees of deviation. The visor is supplied as a set with an external protective glass panel with a darkening degree of 11 and a unique, large internal protective glass. Features and benefits: Full face protection - provides face, chin, throat, ear and head protection enabling welding in all positions. Lightweight polypropylene body - weight of only 205 g ensures comfort for a long time and reduces fatigue. The complete helmet weighs 484 g, which makes it one of the lightest helmets on the market. New Head Heads Eco Head Gear - made of strong nylon material, the headband is very light and durable Potnik also increases the comfort of use. There are 5 positions of the cover deflection. The dimensions of the inner plastic cover: 120x100 mm Dimensions of the outer transparent glass: 90x110 mm Dimensions of the external glass filter DIN 11: 90x110 mm

Torque range from ± 0 - 0,01 Nm to ± 0 - 1500 Nm with speed or angle detection waterproof (IP67) contactless integral torque amplifier single supply voltage wide range of application small form low moment of inertia speed measurement (option) angle measurement (option) DRWPL series torque transducers are fitted with a number of gaskets in compliance with international protection IP67. The devices are also available with optional speed or angle detection for a host of applications. The integrated signal amplifier is powered with 12 V DC and outputs an electrically isolated analog signal of 0 to ± 10 V.

The twist seal Turbion is a seal made of polycarbonate. It has two pre-installed parts: a case and a rotor. The transparent (sometimes semi-transparent) case reliably protects the internal locking mechanism and helps to monitor its integrity. The internal rotor consists of 4 leaves that allow to rotate it only clockwise. This means that it is impossible to open or remove the seal without destroying the rotor, which warns the intruders of unavoidable and obvious signs of external interference. As an added security, the case catch and rotor are marked with the same unique number. This eliminates the possibility to replace the seal or some of its parts with another. Also, your logo, QR and bar codes, and other information can be laser marked on the case catch. All markings are lasered through the thickness of the surface making it impossible to erase them and apply another marking without visible damage.

AIOBOX-MT222F supports 16-channel digital output, High Level On, output voltage 24V DC; The module is with 16 pcs of DI&DO LED indicator; The module input channel can be wired with the 2-Wire or 3-Wire digital sensor; Each input channel of the module supports a 32-bit counter with the counting frequency <200Hz; The module has the functions of Thermal Shutdown and Overcurrent Protection; The internal Bus of the module and Field input adopts optocoupler isolation.

It is a well-known fact that X-Rays, unless properly controlled and directed, are very harmful to the human body and have even been known to cause death. As a consequence, various materials are being utilizes for the insulating of the X-Ray tubes. There are two general methods of securing this protection. One is by the use of protective plasters, such as barium sulphate plaster, and the other is the use of sheet lead. In the use of plaster there are couple of disadvantages. But sheet lead has none of these disadvantages and is consequently considered the best possible protection. The Advisory Committee on X-Ray Protection of the International Congress of Radiology specifically warns against the use of protective plasters in installations of over 75 kV.The thickness of lead required varies with the power of the X-Ray apparatus.

The Structural Health Sensors combine a 2-axis accelerometer with a temperature sensor. Their enhanced internal surge protection and electromagnetic interference immunity make them particularly suitable for the permanent monitoring of outdoor tall structures. The Structural Health Sensors can perform measurements in extreme conditions ranging from -40°C to +85°C. They are of course dust and watertight to IP66. We have a proven track record of several thousands of such sensors operating reliably around the world.TYPICAL USE Permanent outdoor monitoring of tall structures FEATURES Acceleration measurements along 2 axes Temperature measurement of the surface the sensor is attached to Signals transmission through 4-20mA current loops Embedded Lightning Protection Operation down to -40°C MODELS Standard High Resolution

satinated and washable acrylic water-based paint with high-quality quartz for decoration and internal and external protection of both new and old surfaces such as plaster or cement base plasters, plaster-trimmed walls, concrete, plasterboard, wood and non-ferrous supports in general. Excellent for repainting, very high coverage, safe inalterability to atmospheric agents and ultraviolet rays. Washable, breathable, water repellent, antimould. Color: white and Color folder Package: Trunk 4-14 LT Usage: Indoor/outdoor Dilution: from 40% to 50% by volume with clean water • Roller ready to use Yield: 10/12 sqm/lt by hand, depending on the absorption of the support

Anti-algae Acryl-siloxane coating for decoration and protection of internal and external surfaces of both new and old areas like lime base plasters and Cement, lime base, dehumidifiers, water repellent, mineral finishes, pre-mixed coat plasters, concrete, old coatings and synthetic paints, with a spatula or sponged finish. Safe inalterability to atmospheric agents and ultraviolet rays. It has characteristics of high breathability and at the same time characteristics of water repellency.

Acrylic anti-mould mineral-based elastomeric hydropaint. made from selected quartz grains up to 50 microns, for decoration and internal and external protection of both new and old surfaces such as civil cement-based plasters, lime base, hydraulic lime base, Dehumidifier plasters, water-repellent plasters, mineral finishes, coat systems, premided coat plasters, concrete, old coatings and synthetic paints, stucco-trimmed walls, concrete, wood and Non-ferrous supports in general. Excellent for repainting. Specific to solve microcavillature in a preventive and resolutive way in case the phenomenon has already occurred.

handCASE is an extremely robust hand held enclosure made from die-cast aluminium. Thanks to its ergonomic design, the enclosure fits well in your hand. The special wall strength of the enclosure provides solid protection for internal mounting under the most extreme conditions. The heavy-duty enclosure has ingress protection of IP 66 and is available with or without a battery compartment. In the interior of the enclosure are fastening domes for the installation of circuit boards, mounting plates and other internal mounting. Cable glands and other accessories are also available.

The CC-3000 light-duty operating enclosure is particularly suitable for encapsulating operator control panels, industrial computers and display components and, thanks to its modular concept, can be simply adapted to versions tailored to specific customer requirements. — Customised solutions to your specifications — Monitor-based industrial design — Freely selectable width and height (max. 600 x 600 mm) — Depths from 120 mm up to max. 255 mm — High-quality extruded aluminium sections (naturally anodised) — Customised colours from RAL range — Five possible enclosure designs — Optimum heat dissipation due to aluminium sections — Front panels internally-mounted or externally-mounted — Protection class IP65 — Screw-fixed or hinged rear panel — Internal grooves for fixing components — Extensive range of accessories

The aluminium control enclosure CC-5000 neXt offers a unique design with a number of accessories such as the status light. The rounded contours ensure the enclosure is highly recognisable in machinery and mechanical engineering applications. — Customised solutions to your specifications — Innovative and modern industrial design — Freely selectable width and height (max. 1.000 x 1.000 mm) — Depths from 75 mm up to max. 370 mm — Rounded edges, no risk of physical injury — High-quality extruded aluminium sections (naturally anodised) — Customised colours from RAL range — Optimum heat dissipation due to aluminium sections — Integrated recessed grips for simple handling — Protection class IP65 — Internally-mounted front panel — Door configurations for direct access to the interior — Slimline design for configuring flat screen systems

10,000 PSI (700 BAR) CLASSIC SERIES AIR HYDRAULIC PUMP The RWP55-BS has been the market leading pump for over 30 years &amp; is therefore tried &amp; tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Powerful 3 hp motor starts under load Retract side internal relief valve protects tool Use with single or double acting tools. Not for lifting applications 4" calibration capable gauge Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Has a retract port pressure selector 10,000 psi (1,500) CAUTION: This system should not be used for lifting applications.

10,000 PSI (700 BAR) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP The original electric pump! Features a simplified electrical control box and a proven, reliable design. Typically sold to customers that already have a fleet of similar pumps. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Power Team, two-speed high performance, PE55 base pump Retract side internal relief valve protects tool 4-way 2-position solenoid valve standard Use with single or double acting tools, not for lifting applications Hand remote standard Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) pressure retract relief valve CAUTION: This pump should not be used for lifting applications.

10,000 PSI (700 BAR) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP The PE55TWP-BS has been the market leading electric pump for over 30 years &amp; is therefore tried &amp; tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Two Speed High Performance pump Retract side internal relief valve protects tool Hand remote Four-tool manifold (-4 models only) allow use of up to four tools simultaneously 4" calibration capable gauge Use with single or double acting tools Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve 1,500 psi (103 bar) pressure retract relief valve CAUTION: This system should not be used for lifting applications.

10,000 PSI (700 BAR) CLASSIC SERIES AIR HYDRAULIC PUMP The original air pump! Features a proven, reliable design. Typically sold to customers that already have a fleet of similar pumps. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Power Team, two-speed high performance, PA55 base pump Retract side internal relief valve protects tool 4-way 2-position air pilot valve standard Use with single or double acting tools. Not for lifting applications. Hand remote standard Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) pressure retract relief valve CAUTION: This pump should not be used for lifting applications.

- WITH SPECIAL CONNECTION APPARATUS - REINFORCED INTERNAL LINING PROTECT FROM COLD,WIND,RAIN - EFFECTIVE BALANCE SYSTEM AGAINST TO WIND - REFLECTIVE MATERIAL - SPEACIAL DESIGN FOR XMAX