Internal coating - Import export

compact internal coating machine for collapsible tubes

internal coating machine for collapsible tubes

internal coating of beverage cans and bottles with a large length-to-diameter ratio

internal coating machine for beverage and food cans

high performance internal coating machine for aerosol cans and bottles

compact internal coating machine for aerosol cans and bottles

The ground mounting system on concrete supports is suitable for rocky terrain where it is not possible to install pile supports. Mounting on the supporting brackets is considered the most practical and economical for standard ground mounting. Moreover, the base does not have a harmful impact on the environment during its operation. All structures are resistant to loads and comply with all European and international standards. Galvanized coating Z600 extends the life of finished products by protecting the steel against corrosion.

Sun Tunnel - Chatron - Solar Light Tube - Light Tunnel - Sun Pipes - Daylight: They are ecological systems, where natural light is captured and directed through internally coated tube by highly reflective material, which minimizes the dispersion of the rays and allows a supply of light at considerable distances, without heat or cold transfer. Made with robust materials, are resistant to the most severe weather conditions. Studies indicate that an average of about 80% of working hours indoors can be performed with natural light, thus contributing directly to reducing energy consumption and consequently to improve the energy efficiency of buildings. Applications: Homes Offices Gyms Pavilions Factories Supermarkets Warehouses Industrial buildings Amphitheaters Room Centers Creative applications Advantages: Lighting capability supeior than a window Perfectly natural light No termic transfer (Cold and Heat)

Heavy Floor Models The Heavy Floor models allow a perfect installation of the Chatron SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE on floors, getting the diffuser built-in without any kind of overhang. Structural accessory of walk to be cast or installed above the waterproofing. The Solar SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE are efficient systems, where natural light is captured and directed through internally coated tube by highly reflective material, which minimizes the dispersion of the rays and allows a supply of light at considerable distances, without heat or cold transfer. Made with robust materials, are resistant to the most severe weather conditions. Studies indicate an average of about 80% of working hours indoors can be performed with natural light, thus contributing directly to reducing energy consuption.

large portfolio for the internal coating of cans and tubes

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat

lacquer supplis for the internal coating of tubes an aerosol cans

With the manufacture of compacting containers for use in municipal vehicle construction, decades of expertise and know-how go into the implementation of every product. In accordance with the requirements, we implement the container manufacture and, if the customer requests it, take over both internal coating and external painting. The production range includes volume-optimised 37 – 43 m³ vehicle bodies.

Mikropor Compressed Air Filters have been designed to meet all requirements of the compressed air filtration world. These air filters provide more comfortable usage for end users with an increased endurance, higher efficiency at lower pressure drop and more port size options.The air filters have four efficiency ratings, removing contaminants as small 0.01 micron at up to 290 psi (20 bar)- 1/4” to 3” NPT/BSP pipe sizes. A protected auto float drain (2 mm orifice) is standard for optimal and reliable removal of liquid contaminants. These air filters have a zero-porosity aluminium and durable epoxy powder-coat finish, along with a corrosion-resistant internal coating for a long service life. Filter combinations are configured to meet specific application requirements. Filters comply with PED and perform as per related ISO 8573 standards. These filters may be equipped with differential pressure gauges for easy maintenance and energy efficiency.

Special purpose External type Rack cabinets, Galvanized sheet body up to 3mm Body reinforced with special twists 19” Rack Carrier Frame, Doors reinforced with internal insulation materials, Heat and sound insulated covers and panels, High Protection class up to IP66 Driven Screw-Nut (PEM Fastening) Applications Covers that cannot be removed from the outside, Reinforced sabotage and vandalism-proof lock solution Special air conditioning and ventilation solutions, Panel heater options for cold environments, Internal Battery Rack option Zinc coating Solutions against Rust and Oxidation Primer Painting for External Type applications, Epoxy-Polyester Powder Paint suitable for outdoor use, Flexible cabling and Bus-Bar solutions Project-based production in special sizes

Sacha Inchi oil in 60 litre metal cylindrical drums of the Shanantina brand is available for distribution to the European and international market. Beez is an importer, distributor and wholesaler of this high quality organic vegetable oil. This vegetable oil is a food product made from Sacha Inchi seeds that have been shelled and cold pressed (first cold pressing). Sacha Inchi oil is rich in Omega 3, 6 and 9, as well as vitamins A and E. Sectors concerned : - Food industry - Cosmetics sector Shipping : Primary packaging: Cold rolled steel cylinder, with internal coating of Valspar EHD002 epoxyphenolic varnish. Storage : Shelf life: 18 months under optimal storage conditions in a closed container.

Column guards protect vulnerable columns, exposed pipelines, and other items from harm caused by vehicle transport. Column bumpers are usually used in warehouses, factories, public buildings, etc. Sturdy steel construction It protects the column from impact. Versions that are prominently displayed Can be used both inside and outside. There is a robust steel cover to protect the pillars or columns. The post cover is there. Available in two variants: for internal use (powder coated) or external (galvanised and powder coated). The combination of yellow and black ensures that the cover of the column is visible.

Flexible hose made with a layer of silicone-coated fiberglass fabric, internal and visible spiral in copper-plated harmonic steel

Durable internal coated tank that provides optimal corrosion resistance. Secures maximum nitrogen quality. Features 11 bar pressure Vertical Type N2 Holding Tanks can be obtained in different configurations and further different sizes: 25 – 10000 l

The compressor stations are built with as few electronic components as possible and can all run continuously with a relatively low noise level and a minimum level of service is required. The oil-free compressor line is offering reliable compressed air with a long lifetime that fits the air requirements for our nitrogen generators, when a complete solution is needed! Features Internal coated receiver Oil-free compressor High durability Long lifetime for demanding applications Mounted in noise reduction cabinet

The compressor stations are built with as few electronic components as possible and can all run continuously with a relatively low noise level and a minimum level of service is required. The oil-free compressor line is offering reliable compressed air with a long lifetime that fits the air requirements for our nitrogen generators, when a complete solution is needed! Features Internal coated receiver Oil-free compressor High durability Long lifetime for demanding applications.

Galvanised Mini Mesh Beads for internal thin-coat plaster application. Mini mesh corner bead is used to reinforce and protect one-coat finish of plaster on corners at its weakest point on internal walls and plasterboard. The mini mesh bead has a greater area of expanded metal therefore gives a better mechanical key.

AAF compressed air filters are designed for the protection of the downstream compressed air system and equipment with lower airflows against defects and other failures. They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 5 different grades of filter elements (P, R, M, S and A). Optional internal and external condensate drains should be used for efficient condensate draining from the filter housing.< /br> <b>Features</b> <ul> <li>A wider range of different models for different flow rates, including larger 2” and 3” sizes. </li> <li>Convenient design for assembly of several filters and for wall mounting</li> <li>AVELOCK antivibration element lock system<li> <li>Needle felt drainage layer instead of foam for improved thermal resistance<li> <li>X2-COAT internal anti-corrosion protection<li> </ul>

Compared with conventional Multi Cuplas, approximately double flow rates are realized. This could reduce the size of required plates. (Rate of flow increase depends on Cupla sizes.) The MALC type realizes a 2mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6mm. Special valve design enables connection of socket and plug under dynamic pressure of up to 8MPa. When connected, the distance between the socket plate and plug plate is designed to be 30mm for all sizes. This means any size of Cupla can be mounted and used on the same plate. Airless structure valves prevent outflow of fluid and admixture of air into the fluid line. Autocatalytic NickelPhosphorus coating is adopted for surface treatment over special steel body and internal parts. This coating is environmentfriendly.

Round hot tub Furako 180*120cm made of varnished pine polypropylene insert and internal stove 25 kW Hot tub material: Pine, stainless steel hoops Internal oven 25 kW: Stainless steel AISI 304 2mm. MATEA production. Rivet thickness: 45 ± 2mm Polypropylene insert + lacquer coating + Internal wood-burning stove with three circulation pipes + Chimney consisting of one elbow 1m long with a canopy (for the internal stove) + Stove grillage + External ladder + Circular seat + Solid wood paddle + Plumbing drain + Wooden lid for 2 halves made of varnished pine Ash Cleaning set. Special kit for indoor stoves, stainless steel scoop and poker with long handles for easy ash removal. It is made of food grade stainless steel AISI 304. The set includes a reliable bracket for wall mounting. AISI 304 stainless steel products do not rust and do not change their appearance during operation. Our set will last a long time and will delight its owners.

Door frames and windows must be fully shielded with lead to completely eliminate radiation leaks. We usually manufacture our cases from 2mm stainless steel. We apply electrostatic oven painting process. At the end of the paint, we make lead armor in the desired lead plate thickness. In case of armoring, we armor the lead without screws.Using its metal internal construction completely lead-coated case with lead glass will allow you to take precautions against assembly errors and leaks from the glass frame. Lead glass cases, which can be produced as static painted in the desired color, are produced with frame armor at a certain lead thickness according to the values of the device used. Lead glasses are delivered to you in a boxed protection cage. The person who will assemble the lead glass should refer to the special assembly instruction document and the user manual.

Details Product storage tank, internal paneling made of aisi 304 stainless steel Coating of internal paneling with teflon to facilitate the falling of product and subsequent internal cleaning High efficiency polypropylene pneumatic pump Pneumatic pump compressed air pressure control device Double aisi 304 stainless steel filter to safeguard efficiency of pneumatic pump Internal ramps complete with nozzles suitable for achieving an optimum impregnation of the part to be treated Internal fittings to load/unload product impregnating machine Product drip collection tray with replenishment in machine

GEROMAC PE220 2hp airless hydraulic electric paint sprayer has been designed for medium size painting contractors, with a slow stroke pump making this paint sprayer ideal for internal and external coating applications. PE220 ensures accurate pumping and efficient spraying for residential and commercial jobs, renovation and property maintenance.

internal and external coated house doors as clint requıred spec and models size. PVC, PANEL, MELAMİNE, LACQUER, high quality product warranty.