Interface module - Import export

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or use related wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24 month warranty* on the complete ABB handheld control panel.

KUKA repair, exchange & replacement for pendants, motors and ROBOT We offer general overhaul repairs, as well as exchange and replacement parts for KCP1, KCP2 and KCP4 pendants, motors and other parts manufactured by KUKA. For each repair and every KUKA pendant that is exchanged or purchased as a replacement part from BVS, we not only replace all components that are electronically and mechanically defective as part of the product reconditioning, but also replace all of the parts that are subject to ageing or use related wear. What's more, we only use original components approved by the manufacturer or legislator to repair your KUKA pendants. We are also able to restore the full functionality of the 6D mouse. Thanks to the excellent availability of replacement products in our extensive warehouse comprising over 100,000 assemblies and the option of express repair services, you will receive your KUKA pendant as quickly as possible.

KUKA repair, exchange & replacement for pendants, motors and ROBOT We offer general overhaul repairs, as well as exchange and replacement parts for KCP1, KCP2 and KCP4 pendants, motors and other parts manufactured by KUKA. For each repair and every KUKA pendant that is exchanged or purchased as a replacement part from BVS, we not only replace all components that are electronically and mechanically defective as part of the product reconditioning, but also replace all of the parts that are subject to ageing or use related wear. What's more, we only use original components approved by the manufacturer or legislator to repair your KUKA pendants. We are also able to restore the full functionality of the 6D mouse. Thanks to the excellent availability of replacement products in our extensive warehouse comprising over 100,000 assemblies and the option of express repair services, you will receive your KUKA pendant as quickly as possible.

We offer the matching accessories for quick mounting, simple parameterization and safe protection of interface modules. From cage clamps, programming adapters and power buses up to the IP67 rated housings: Each item is perfectly tailored to the interface module series IM, IME and IMC, making installation and commissioning of your application easy.

In addition to the MADI interfaces available on the processor card, the MN-RN300 RockNet Audio Interface Card gives access to the wide range of Riedel RockNet audio interface modules.

In addition to the MADI interfaces available on the processor card, the MN-RN300 RockNet Audio Interface Card gives access to the wide range of Riedel RockNet audio interface modules.

The power supply modules of the IM82-24 series feed DC consumers and especially our IM, IMS and IMC interface modules with 24 V. The devices are mounted on DIN rail and meet protection class IP20. The output current is - depending on the type - 2.5 A, 5 A, 10 A or 20 A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. Other features include high efficiency, as well as temperature resistance and dynamic overload capability.

The probe's measurement data can be sent to a PLC via Ethernet, EtherNet/IP, PROFINET or EtherCAT fieldbus Fieldbus compatible interface module: MG80-NE (Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET) / MG80-EC (EtherCAT) Up to 16 MG80-CM counter modules for measuring probes can be connected to each main module. Up to 64 MG80-CM or touch probes can be connected to MG80-NE via max. 3 LINK connections Up to 255 MG80-CM or measuring probes can be connected to MG80-EI/PN via LINK connections. Theoretically, up to 65,535 MG80-CM or mestasters can be connected to MG80-EC via LINK connections. MG80-CM Counter module for connection of one DK or DT series probe (with MT13) Easy installation on DIN mounting rail LZ80-K1/K2 I/O module for MG80-EI, MG80-PN and MG80-EC Equipped with 8 inputs and 8 outputs

LT80 multifunction display with interface modules and clearly structured user interface Connection of up to 32 DK or DT probes (DT probes with MT adapter) Easy installation on DIN mounting rail High speed trigger module When connecting an encoder with TTL output pulses to the trigger module, measured values from up to 16 probes can be read out synchronously in dynamic applications The synchronous measurement data can be stored on the LT80 between LT80-NE Display 7-inch touchscreen LCD display for 2 to 16 measurement channels Different measurement modes and measurement functions selectable: Current value, MAX, MIN, P-P, ADD/SUB function, 2 or 4 step comparator function for automated measuring and sorting Display I/O status 3 different interfaces (USB stick, SD card, LAN) for data storage, data transfer and parameterization Different menu languages selectable (English, German, Japanese)

The IF2008/ETH interface module is designed for multi-channel applications. This module allows for up to 8 Micro-Epsilon sensors or encoders with RS422 interface to be integrated into an Ethernet network. Furthermore, the converter offers 4 programmable switching inputs/outputs (TTL and HTL logic) as well as 10 indicator LEDs, which show the channel or device status directly on the device. Parameter setting of the interface module can be easily done via the web interface.

The IF2035 interface modules are designed for easy connection of Micro-Epsilon sensors to Industrial Ethernet controllers, e.g., plant control systems. The PROFINET and EthernetIP modules are compatible with sensors that output data via an RS422 or RS485 interface. These modules operate on the sensor side with up to 4 MBaud and have two network connections for different network topologies. Installation in switching cabinets is via a DIN rail.

The IF2001/USB interface module converts the digital RS422 signals of a laser optical sensor into a USB data packet. For this purpose, the sensor is connected to the RS422 interface of the module. The converter loops through further signals and features such as laser on/off, switch signals and function output. The connected sensors and the converter can be programmed through software.

scanCONTROL 25x0 laser scanners are designed for industrial measurement tasks. The combination of compact design, versatility and signal stability creates an excellent price/performance ratio, especially for measurement tasks involving large quantities. The scanCONTROL 25x0 laser scanners are available with three measuring ranges with either red or blue laser. Optional accessories, different cable types and interface modules enable a wide range of applications in the production line and in machine building.

The IF1032/ETH interface module now enables to run sensors with analogue interfaces with the proven web interface. With the Ethernet interface, measured data can be easily displayed on a PC. Moreover, sensors can be connected to an EtherCAT bus. The RS485 interface allows connection of new sensors using the Micro-Epsilon specific RS485 protocol.

The compact DTD inductive sensor system consists of a gauge with a plunger guided by a plain bearing and a controller, which are connected to each other with a 3 m long cable. The controller has a diameter of just 18 mm and the 3m-long cable enables flexible installation. The DTD sensor system is based on an established LVDT measuring method. It impresses with outstanding precision and provides high signal stability and resolutions down to the micrometer range. Thanks to its high temperature stability, resistance to shock and vibration, and insensitivity to dirt, the induSENSOR DTD is ideal for industrial measurement tasks. Modern fieldbuses such as Ethernet, PROFINET or EtherCAT are supported via optionally available interface modules.

The flowmeter with touchscreen display and backlighting convinces with its demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Media examples: Paints, lacquers, mineral oils, acids, alkalis, mineral oils, solvents * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, paints, lacquers, mineral oils, solvents, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as Paints, lacquers, acids, alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

Format 96 x 96 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 96 mm, portrait Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 48 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

The flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating oval wheel meters and the magnets placed on the measuring wheels, it enables precise measurement of the volume flow and measures non-flammable liquids such as paints, varnishes, acids, solvents, alkalis, mineral oils, hydrocarbons and highly flammable liquids precisely, quickly and, above all, efficiently. * Optionally available in an explosion-proof version Features & benefits * Measurement according to the oval gear principle * High measuring accuracy due to overrun correction * Low pressure loss in the system * Touchscreen display with self-explanatory, multilingual user interface * Relay module for volume preselection can be retrofitted at any time * Approved in accordance with ATEX Directive 2014/34/EU, Category 2

The flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating oval wheel meters and the magnets placed on the measuring wheels, it enables precise measurement of the volume flow and measures non-flammable liquids such as alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and, above all, efficiently. * Optionally available in explosion-proof design * Examples of media: Paints, varnishes, mineral oils, acids, alkalis, mineral oils, solvents * Measurement according to the oval gear principle * High measuring accuracy due to overrun correction * Touch screen display with self-explanatory, multilingual user interface * Relay module for volume preselection can be retrofitted at any time * Approved in accordance with ATEX Directive 2014/34/EU, Category 2

The first flow meter with touchscreen display and backlighting impresses with its needs-based display and operability, multilingual interface and compact design. Thanks to the rotating oval wheel meters and the magnets placed on the measuring wheels, it enables precise measurement of the volume flow and measures non-flammable liquids such as paints, varnishes, acids, solvents, alkalis, mineral oils, hydrocarbons and highly flammable liquids precisely, quickly and, above all, efficiently. * Optionally available in explosion-proof design Features & benefits * Measurement according to the oval gear principle * High measuring accuracy due to overrun correction * Low pressure losses in the system * Touchscreen display with self-explanatory, multilingual user interface * Relay module for volume preselection can be retrofitted at any time * Approved in accordance with ATEX Directive 2014/34/EU, Category 2

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as Paints, lacquers, mineral oils, acids, alkalis, mineral oils and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

The µCAN.1.ti-BOX is the single channel solution for the acquisition of temperature signals. Resistance sensors as well as thermocouples may be connected to the module. The CAN interface supports the protocol CANopen.