Insulation tubing - Import export

Aluminium Oxide, Al2O3 is a major engineering material. It offers a combination of good mechanical properties and electrical properties leading to a wide range of applications. Alumina can be produced in a range of purities with additives designed to enhance properties. A wide variety of ceramic processing methods can be applied including machining or net shape forming to produce a wide variety of sizes and shapes of component. In addition it can be readily joined to metals or other ceramics using metallising and brazing techniques. Alumina based ceramics are by far the largest range of advanced ceramics made by INNOVACERA. Due to the important combination of properties, we have thoroughly researched the behaviour and characteristics of our Alumina products to give you the best possible component. Typical Alumina characteristics include: Good strength and stiffness Good hardness and wear resistance Good corrosion resistance Good thermal stability Excellent dielectric properties

The IST AG 400 °C Pt Temperature Sensor Series offers an excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +400 °C.​ The sensors are vibration and temperature shock resistant and offer excellent solderability. The standard 400 °C Pt Temperature Sensor Series is supplied with Ag-wires. Due to the wire material characteristics, the long directly welded Ag-wire shows very little impact on the sensor accuracy. Furthermore, the 400 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. PTFE-insulation tubes. ​The IST AG Pt temperature sensors up to 400 °C are also available with: — Paired and grouped sensors — 1/5 IEC and 1/10 IEC accuracy — 2-, 3- and 4-wire configuration — Grain-stabilized Ag-wire

Precision Ceramics has introduced a new and exciting range of advanced ceramic tubes and insulators ideally suitable for thermocouple protection in high temperature measurement applications. The alumina-based tubes are used throughout many industries to aid monitoring the stability and performance of production processes especially those within hostile and aggressive chemical environments at temperatures up to 1,700°C. They are manufactured to DIN V ENV 12212 and are very strong, organically inert and well proven in a wide field of applications.

Ceramic Si3N4 Silicon Nitride Tube Silicon Nitride (Si3N4) is 60% lighter than steel but strong enough to survive some of the most demanding applications in a variety of industries. This lightweight, high-strength ceramic material is used as an alternative to stainless steel, super alloys, tungsten carbides and first-generation ceramics such as Al2O3 and ZrO2. It offers excellent thermal shock resistance and high fracture toughness, compatibility with nonferrous metal melts, and improved structural reliability compared to other ceramic materials. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

Aluminium Oxide, Al2O3 is a major engineering material. It offers a combination of good mechanical properties and electrical properties leading to a wide range of applications. Alumina can be produced in a range of purities with additives designed to enhance properties. A wide variety of ceramic processing methods can be applied including machining or net shape forming to produce a wide variety of sizes and shapes of component. In addition it can be readily joined to metals or other ceramics using metallising and brazing techniques. Alumina based ceramics are by far the largest range of advanced ceramics made by INNOVACERA. Due to the important combination of properties, we have thoroughly researched the behaviour and characteristics of our Alumina products to give you the best possible component. Typical Alumina characteristics include: Good strength and stiffness Good hardness and wear resistance Good corrosion resistance Good thermal stability Excellent dielectric properties

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900

It is a well-known fact that X-Rays, unless properly controlled and directed, are very harmful to the human body and have even been known to cause death. As a consequence, various materials are being utilizes for the insulating of the X-Ray tubes. There are two general methods of securing this protection. One is by the use of protective plasters, such as barium sulphate plaster, and the other is the use of sheet lead. In the use of plaster there are couple of disadvantages. But sheet lead has none of these disadvantages and is consequently considered the best possible protection. The Advisory Committee on X-Ray Protection of the International Congress of Radiology specifically warns against the use of protective plasters in installations of over 75 kV.The thickness of lead required varies with the power of the X-Ray apparatus.

The insulated tube is used to manufacture tubing. In 20, 25 or 30 m insulated coils, it can be cut, flared or crimped on-site.Black elastomer insulation (13 or 19mm) is generally used in Industrial refrigeration or in very humid regions. The copper coil offers the advantage of being independent and can be cut to the required length. Tubes are already insulated which saves time during installation. Elastomer-insulated tube only exists in mono-tube.

The insulated tube is used to manufacture tubing. In 20, 25 or 30 m insulated coils, it can be cut, flared or crimped on-site.Black elastomer insulation (13 or 19mm) is generally used in Industrial refrigeration or in very humid regions. The copper coil offers the advantage of being independent and can be cut to the required length. Tubes are already insulated which saves time during installation. Elastomer-insulated tube only exists in mono-tube.

The Bi TUBES is an assembly of 2 insulated tubes, joined by the insulation. It allows both diameters to be inserted in one operation when installing.The insulation looks good, does not attract dirt, offers an excellent resistance to UV and to pinching.

The insulated tube is used to manufacture tubing. In 20, 25, 30 or 50m insulated coils, it can be cut, flared or crimped on-site.The copper coil offers the advantage of being independent and can be cut to the required length.Tubes are already insulated which saves time during installation. For UV resistance of insulation outdoors, use paint PIN75 (page 15)

The insulated tube is used to manufacture tubing. In 20, 25, 30 or 50m insulated coils, it can be cut, flared or crimped on-site.The copper coil offers the advantage of being independent and can be cut to the required length.Tubes are already insulated which saves time during installation. For UV resistance of insulation outdoors, use paint PIN75 (page 15)

The insulated tube is used to manufacture tubing. In the 0.7mm version, it is more economical for an equivalent quality (SUPERCLEAN) In 30 or 50m coils in Mono and 20, 25 or 30m in insulated Bi-tubes, it can be cut and flared on the site.The insulated copper coil offers the advantage of being independent on-site and tubing can be cut to the required length.Tubes are already insulated which saves time during installation.For UV resistance of insulation outdoors, use paint PIN75 (page 15)

The insulated tube is used to manufacture tubing. In the 0.7mm version, it is more economical for an equivalent quality (SUPERCLEAN) In 30 or 50m coils in Mono and 20, 25 or 30m in insulated Bi-tubes, it can be cut and flared on the site.The insulated copper coil offers the advantage of being independent on-site and tubing can be cut to the required length.Tubes are already insulated which saves time during installation.For UV resistance of insulation outdoors, use paint PIN75 (page 15)

The Bi TUBES is an assembly of 2 insulated tubes, joined by the insulation. It allows both diameters to be in sertedin one operation when installing The extruded PE insulation provides excellent resistance to tearing and the right density. Already available in 1/4-3/8, we shall be offering 1/4-1/2 within the next few weeks, followed by the other diameters during the year. Euroclass certification currently being studied.

The FLARE refrigerant tubing routes the refrigeration fluids into the systems. Prices may change The tubing is insulated and flared in the factory and is ready to install. according to the price of copper Saves time when installing air conditioning systems. Fully leaktight unions prepared in the factory. Compatible with all refrigerant fluids.

Axon' expertise in PTFE insulated wires and cables has enabled the company to offer different PTFE based products : tubes, rods, profiles, films, glass cloth impregnated with PTFE, desiccant bags, Celloflon® tapes, etc... They all take advantage of the mechanical, chemical, thermal and electrical characteristics of the PTFE (polytetrafluorethylen). Celloflon® is an expanded PTFE material patented by AXON'CABLE Advantages Good temperature resistance (-200°C to +260°C) Low dielectric constant Non adhesive properties Non flammability Chemical resistance, … Biocompatibility Construction Tubes can be used as cable insulation, cannulae, tubes for liquids or hot gases (e.g assemblies for ink jet printing). Various versions : from ultra thin tubes to tubes with specific diameters Various colours : natural, black, yellow, red, orange, bicolour, spiral, … Tubes for micro-catheters with walls as thin as 10 µm PTFE multilumen tubing Axon' offers a wide range of rods specially used as fillers. They are made with PTFE or celloflon® (porous PTFE).

Main products: Copper tubes for air conditioning and refrigeration, inner grooved copper tubes, environmentally friendly copper water (gas) tubes, insulation tubes, tube fittings, plastic-coated tubes Product characteristics: High dimensional precision, high heat dissipation performance, high cleanliness, lightweight Applications: Air conditioning, refrigeration, automotive industry, construction industry, home appliances Production capacity: 150,000 tons Honorary titles: Second Prize of Science and Technology Award of China Nonferrous Metals Industry, Second Prize of Science and Technology of Zhejiang Province

OPERATING TEMPERATURE: MAX 200° C Standard power, size and shape or as indicated by the customer. PANEL TYPE: resistive inner filament* insulated with PTFE tube (Teflon) on anti-acid MOPLEN support. TUBOLAR TYPE: resistive inner filament* on CERAMIC-FIBRE support, insulated with BOROSILICATE (Pyrex) anti-acid tube.

The hot foil meter marker FMS 5 is the newest and most advanced machine specifically designed for printing length marks on cold plastic tubing or plastic insulated cables using pigment coated tapes. Meter marking at highest accuracy of measurement Speeds up to 200 m/minute with special color tape pay-off unit STANDARD CONFIGURATION One marking wheel 1 m in circumference with built-in 4-digit meter counter and text segment supports for installing engraved type segments Complete high-performance heating system electronically controlled to match marking speed and number of type segments Counter: raised type, standard number size: 3.5 mm, manual reset lever Marking wheels also available separately for quick changing of text or codesHot stamping marker using electrically heated, engraved dies and pigment tape. Advanced AC Servo drive for jerk-free operation even at very low operational speeds. Tacho-incremental encoder standard, optional synchronizable

Spirally wound tubing and end caps made out of Mylar ®, Nomex ®, Kapton ® non-shrink and heat-shrink.

Optical cable for backbone networks with a central strength member made of FRP rod in PE sheath; around the central strength member are stranded tubes containing up to 24 optical fibers each, filling dummy tubes (if necessary), insulated copper conductors, with laminated aluminum PE tape; in inner PE sheath, with an armor made of round steel wires and outer PE sheath. Operational temperature of the cable is from -40°С to 70°С. Arctic version -60°С to 70°С Minimum temperature for installation is -30°С.

Distribution optical cable with a central strength member made of FRP rod in PE sheath; around it are stranded tubes containing up to 24 optical fibers each, filling dummy tubes (if necessary), insulated copper conductors, with intermediate PE sheath, with water-blocking tape, laminated aluminum PE tape; with an armor made of steel corrugated tape and outer PE sheath. Operational temperature of the cable is from -60°С to 70°С. Minimum temperature for installation is -30°С.

Aerial Figure 8 optical cable with a central strength member made of FRP rod in PE sheath; around it are stranded tubes containing up to 24 optical fibers each and (if necessary) filling dummy tubes, insulated copper conductor; with an outer strength member made of FRP rod, steel strand, or steel wire; with outer PE sheath. Operational temperature of the cable is from -60°С to 70° С. Minimum temperature for installation is -30°С.

Distribution optical cable with a central strength member made of FRP rod in PE sheath; around it are stranded tubes containing up to 24 optical fibers each, filling dummy tubes (if necessary), insulated copper conductor in outer PE sheath. Operational temperature of the cable is from -40°С to 70°С. Minimum temperature for installation is -10°С.

A flexible dual wall, radiation cross linked tubing used for insulating, jacketing and bundling of wire harnesses and components. Ideal for sealing connector to cable transitions and similar moisture proofing applications. Made from flame retardant polyolefin, MIL and UL rated*, it offers a good balance of sealing and protection against fluids on transitions to connectors. Shrink Ratio 3 1 or 4 1 Operating Temperature Range 55°C to 125°C

A highly flexible, zero halogen tubing used for insulating, jacketing and bundling of wires, harnesses and components. Made from flame retardant polyolefin, it has excellent electrical, chemical and physical properties. Suitable for applications requiring low smoke emissions. Shrink Ratio 2 1 Operating Temperature Range 30°C to 125°C Zero Halogen

A cost effective heat shrink tube for general insulation and for use in hermetic electric motors. It can be supplied in different lengths and wall thicknesses to suit the application in hand. It provides comprehensive mechanical and electrical protection. Shrink Ratio 30 35% Operating Temperature range 130°C to 155°C

Warm (form -17°C to -25°C) all-around sleeping bag with quality goose down fill (FP 850+). Like most BASK mummy sleeping bags, this one features two zipper configurations that can zip together. The style features a special tape for anti-snagging, a huge adjustable hood and an insulated draft collar for ultimate heat retention. The twoway zipper has an insulated draft tube. EN 13537 tested.