Insulation tests - Import export

Based on its specifications, this device can be used in various applications. It is especially suitable for resistance measurement on insulating materials such as e.g. cable insulations, foils, textiles, surfaces, insulating liquids,etc. With a test voltage of 45 V, 100 V, 250 V and 500 V the device fulfi ls most test specifi cations such as e.g. DIN 51953, 53482 and 54345. The guard switching allows single resistance measurements in a triangle wiring. This could be e.g. a two line cable with common shield or the measurement of insulating materials on a guardring measurement cell. The selection of the measurement range is done manually or automatically. Fast subsequent measurements can be realized by the internal limit value indicator. When the measured value exceeds the limit the limit value indicator switches and activates a potential-free relay output. The megohmmeter RESISTOMAT® model 24508 is the right instrument for its use in laboratory as well as in industrial applications.

Without a doubt, the B28 is the smallest high-performance leak tester for battery cells and breathable membranes. One of the main advantages is that our B28 module can quickly test the cell’s insulation. To ensure the best measurement conditions, the B28 has the optional capability to control filling and dumping vacuum around the part to test in a specific enclosure. You can daisy chain up to 50 modules and monitor them with a touch screen panel and our user-friendly interface: B28 control. Leak measurement using air ionization method (I max<1 mA) Compact size External vacuum source Integrated fill and dump valves Ethernet network up to 50 modules (Modbus IP) DIN rail mounting Environment: ROHS standard A high voltage loaded sharp end is applied next to an earth connected base and in between lays the plastic part we test.

• Containing quality tools, partially insulated and tested according to DIN EN/IEC 60900 • Tool bag made of durable cowhide with circumferential aluminium edge protection

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • The ergonomic multi-component design with integrated soft zone and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Insulation according to DIN EN/IEC 60900 • Blades hardened and black with injected insulation • Blades made of molybdenum vanadium steel / chrome vanadium steel

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900 • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Inset boxes for a variety of classification systems and divisions

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Inset boxes for a variety of classification systems and divisions

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Multi-layered insulation according to DIN EN/IEC 60900

• Containing quality tools, partially insulated and tested according to DIN EN/IEC 60900 • Hard-shell cases made of high-strength, sturdy ABS plastic with hardened and torsion resistant aluminium frame

• Containing quality tools, partially insulated and tested according to DIN EN/IEC 60900 • Sortimo L-BOXX, plastic system case made of shock and impact proof ABS-plastic for more mobility • Seamless integration of the L-BOXX into the Sortimo Globelyst M system • Inset boxes for a variety of classification systems and divisions

PAI material considers the most efficient fusible thermoplastic in terms of temperature resistance, chemical resistance and mechanical stress. Its mechanical strength at 205 °C surpasses many engineering plastics at room temperature. BIEGLO offers PAI finished parts of the following types: Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF). Each type is best suited for a particular application. Polyamide-imide can be used for a lot of appliations like gears, rollers, plasma chamber hardware and wafer contact fixtures. In addition, PAI material is ideal for high-temperature thermal insulators, burn-in test sockets, valve seats, fasteners, mechanical connections, rollers, labyrinth seals, drive wheels, valve plates, vanes and support gaskets.

Product Features: • Applications: Driver, Input, Interstage, Isolation. • 100mW power level at 200Hz. - 15kHz. • Pin type (0.0375" x .02"), P.C. board mount. • Economical, open type construction. • Frequency response 200 Hz. - 15 Khz. (+/- 1 db, ref. @ 1 Khz.). • Total distortion less than 0.5% for outputs at 200 Hz., decreasing at higher frequencies. • Insertion loss less than 1/2 db. • Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.187" grid pin spacing. • Insulation test 1500V rms, • Net weight: 0.5 oz.

Product Features: • Pin type (0.25" length and 0.025" square), P.C. board mount. • Economical, open type, horizontal bracket construction. • Includes clinching lugs for extra mounting strength. • Frequency response 200 Hz. - 15 Khz. (+/- 1 db, ref. @ 1 Khz.). • Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies. • Insertion loss less than 1/2 db. • Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 2" grid pin spacing. • Insulation test 250V rms. • Net weight: 0.6 oz. (148 Series) and 1.0 oz. (149 Series).

Product Features: • Pin type (0.25" length and 0.025" square), P.C. board mount. • Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength. • Frequency response 200 Hz. - 15 Khz. (+/- 1 db, ref. @ 1 Khz.). • Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies. • Insertion loss less than 1/2 db. • Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2" grid pin spacing. • Insulation test 250V rms. • Net weight: 0.6 oz. (148 Series) and 1.0 oz. (149 Series).

Product Features: • 117/234 VAC - 50/60 Hz. dual primary. • Secondaries are either center tapped (C.T.) or dual secondaries for added versatility. • Open style, 4 hole frame chassis mount. • Minimum 6" long leads or copper tabs with holes. • Dual bobbin design - no electrostatic shield required. • Class B insulation (130°C). • Hi-Pot test of 2,000V RMS. • UL listed (#E207860) Type 3AH. • CSA certified (#LR209651).

Product Features: • Dual primary 115/230 VAC. • 50/60 Hz. operation. • Dual secondaries for series or parallel connections. • 4,000 V RMS Hipot test. • Class F insulation (155°C). • Chassis mount (either two or four hole depending on size). • Five VA sizes to choose from. • Dual bobbin construction. • Dual use terminals (solder lug or quick connect). • C UL US recognized (E207860). • TUV Type approved. • CE certified to IEC 950 (Approved to EN 60-742 Safety Isolating Transformers).

Product Features: • Used (with 150 Volt full scale A.C. voltmeters) to measure the voltage of 240, 480 or 600 VAC systems. • Primary insulated for 4.0 KV rms test, suitable for L.V. switchgear and motor control use. • 50/60 Hz. operation. • Open construction - "Type H". • CSA certified (209651). • The nominal line voltages of 240 and 480 volts may be exceeded by 25% for 60 Hz. operation. • Insulation system 55°C rise, Class 105.

Product Features: • Primary 115 VAC 60 Hz. - except as noted. • Enclosed, 4 hole, chassis mount. • Minimum 6" long leads. • Units can be run full wave bridge or full wave C.T. • Class A insulation (105°C). • Hi-Pot test of 2,000V RMS. • Conservative designs - CSA certified (209651). • Note: A production "running change" has been made to the primary winding - effective with August 2009 production.

Product Features: • Two versions are available: • Primary 115 VAC, 50/60 Hz. or • Primary 117/234 VAC, 50/60 Hz • A 2,000 VAC and above, secondary leads are through rubber bushings. • Units can be run full wave bridge or full wave C.T. • V.A. is a C.C.S. rating. • Current ratings are CCS (Continuous Commercial Service) and ICAS ratings (Intermittent Commercial or Amateur Service). • Enclosed, 4 hole chassis mount. • Minimum 6" long leads. • Class A insulation (105°C). • Hi-Pot test at a minimum of twice secondary voltage. • Conservative designs - CSA certified (209651).

Warm (form -17°C to -25°C) all-around sleeping bag with quality goose down fill (FP 850+). Like most BASK mummy sleeping bags, this one features two zipper configurations that can zip together. The style features a special tape for anti-snagging, a huge adjustable hood and an insulated draft collar for ultimate heat retention. The twoway zipper has an insulated draft tube. EN 13537 tested.

As a manufacturer of control cabinets, we are always at your side. We process standard cabinets as well as special designs for our customers. We take care of construction and wiring plans directly according to customer specifications, as well as the mechanical processing, the construction and the wiring of the control cabinets. After the actual construction, we also carry out an electrical test and insulation tests. Upon delivery, you will receive the customer-specific labels and accompanying documents. Your advantages with A + B Electronic -Switch cabinets directly according to your specifications -We are not just a service provider, but a technology partner: A + B Electronic thinks your project with you and together we can bring it to series production successfully

In-line fault testing on single wires and cables during the extrusion or rewinding process has become standard procedure today. ZUMBACH Spark Testers can be used to test the most diverse range of cable products as per international standards, like IEC 62230, UL 1581, UL 2556 and other. Integrated ports allow communication for easy integration with quality control systems (e.g. USYS). According to various applications, ZUMBACH offers Mains Frequency, Direct Current and High-Frequency spark testers. Typically they are installed at the end of the cooling trough in extrusion lines or in rewinding pro- cesses and detect the smallest defects and bare patches in the insulation or sheathing of electrical wires and cables. Properties Testing with sinusoidal alternating voltage and mains frequency or low frequency Bare patch and pinhole detection Electrodes for product diameters up to 250 mm Models with up to 40 kV AC or 28 kV DC available

Bakelite is a material made from pure cellulose paper and phenolic resins. It has high mechanical characteristics and discrete dielectric characteristics. Bakelite is a rigid thermosetting plastic that is highly heat resistant. Easily workable by machine tools, can be sheared up to a thickness of mm. 1.5 after heating to 100-110 ° C. Processing materials,sheet,mainly used in TCT, insulation compoents in ITE fixture, testing fixture, silicome rubber key mould,jigs, mould splint,table-board grinding pad Charactors: With superior antistatic property, mechanical property, excellent acid resistance,dielectrical property.

Additional Equipments * Automatic fuel filling systems * Critical type silencer * Mobile trailer * Fuel and engine oil heater * Fuel water separator filter * 4 Pole power transfer board * Thermal and magnetic switch * Synchronizing panel DİESEL ENGINE * Heavy duty type Ricardo, Perkins, SDEC, Shanghai series engine. * 4 Stroke water cooled * Mechanical/electronic governor control * Changeable air, oil and fuel filters * Engine block water heater ALTERNATOR * Brushless, single phase synchronous alternator * Class H insulation * IP 21-23 Self-excited protection class * Electronic automatic voltage regulators Control Board * GDM control card * Battery charger rectifier * RS232 seri port * Daily, weekly and monthly auto testing Cabin * Sound insulating cabin designed * Suitable design for convenient carrying and lifting * Locked doors which can be opened from three side * Flush, special sockets, emergency remote manual stop button on the outer surface of cabin ...