Insulating panels - Import export

Polistop is a sandwich panel that integrates with the traditional structures made of two galvanized electrowelded mesh, joined by connectors, and a suitably shaped polystyrene (EPS) sheet; the sheet can have a variable thickness according to the architectural and insulation requirements. This precast insulating panel, subsequently completed on site, can be used for fast building and excellent insulation Infill walls of residential and commercial buildings; Infill of prefabricated industrial buildings or on site castings; Partition walls.

insulating panels for windows, walls, and stores.

Insulated Panel for Cold Store, Warehouse and Building Construction, cladding etc.

The floor panel is a sandwich panel used for floor and roof coverings, whose thickness varies according to the spans and the design loads. This prefab panel, prefabricated in the factory, is generally completed on site by placing concrete into the ribs and upper concrete casting a sort of a disposable, insulating formwork, whose thickness of polystyrene (EPS) varies according to the requirements of insulation and structural resistance. Alternatively, the reinforcement and casting can be done directly in the factory, as for the prefabricated concrete floors. These insulated precast panels are used for floors of structures completely made with panels; floors of buildings made with prefabricated structures, onsite castings or made with metal structure; floors of prefabricated modules.

The double panel is made of two single sandwich panels, assembled leaving an intermediate crawl space of variable thickness depending on the type of building and the required wall resistance. These panels, prefabricated in the factory, are completed with concrete casting in the central crawl space the double panel could therefore be defined as a disposable, insulating formwork, whose thickness of polystyrene (EPS) sheets varies according to the insulation requirements. Externally, the double panel is completed using traditional plaster. This insulated precast panel is mainly used for main walls in structures completely built with insulating panels; main walls in structures with wooden roof or any other material.

The Single Panel is a sandwich panel made of two galvanized electrowelded mesh, joined by connectors and by an appropriately shaped polystyrene sheet (EPS) of variable thickness according to specific architectural and insulation requirements. This insulated precast panel, subsequently completed onsite, is used for Main walls in structures completely made with panels, compatibly with the structural inspections and technical standards; Main walls in structures with wooden roof or any other material; Partition walls; Infill walls of residential and commercial buildings; Infill of prefabricated industrial buildings or castings.

Adhesive and scraper based on hydraulic binders for gluing and shaving inside and outside of polystyrene insulating panels, polystyrene (also embossed), polyurethane, cork, cement wood . Suitable also as a spur on concrete surfaces, rustic, plastic and/or mineral coatings, traditional or premised plasters based on lime and cement both new and old, even if painted provided that they be in an excellent State on plasters that have withdrawal injuries, with application in the first coat of Malvin net. Package: 25 kg sacks-70 sacks-17.50 QL footboards Usage: Indoor/outdoor Color: White/Grey Particle size: ≤ 0.6 mm Yield: As adhesive gluing points 2/3 kg/MQ/gluing at full surface 4/5 kg/MQ • As a spur 3/4 kg/MQ for two coats Vapour-passage resistance coefficient EN 1015-19: μ ≤ 10 Capillary water absorption EN 1015-18: Class "W1" Thermal conductivity EN 1745: λ10, dry, mat = 0.35 W/MK Flexibility: Excellent Certification: Tested according to ETAG 004

Reusable cold chain pallet box. This sleeve pack has a pallet dimension of 1000x1200mm but can be provided standard in the following pallet dimensions and a height of your choice: OUTSIDE (mm) INSIDE (mm) 1200 × 800 1090 x 690 1200 × 1000 1085 x 885 1140 × 790 1025 x 675 1140 × 980 1025 x 865 1220 × 1140 1110 x 1030 1300 × 1140 1185 x 1025 1470 × 1140 1355 x 1025 1550 x 1140* 1445 x 1115 1600 × 1140 1495 x 1015 * fitting a quarter of a PMC-plate (for air cargo). CONSTRUCTION WALLS 10mm thick, 3.000gr/m2 density high impact Polypropylene cell structured laminated plate material WALL ISOLATION VIP-panels (Vacuum insulated panels) with fused silica RIMS all rims are closed for hygiene and easy cleaning PALLET & LID Hdpe Twin sheet injection molding

Roof panels for the Sprinter Lighttrain in the Netherlands. For the Sprinter Lighttrain made by Bombardier, stainless steel sliding blocks were glued into the GRP profiles (A2 bonding) for high rigidity. Vertical tear resistance of 2,772 N was required for every single adhesive bond. This requirement was far surpassed in practice. The roof panel, which has the appearance of a 3dimensional component from a single cast, consists of pultruded GRP profiles and 3D moulded parts, partly combined with stainless steel components. 3Dprinted components may also be used.

Roof panels for the Flexity tram in Palermo, Italy What looks like a threedimensional, singlecast component on the sides of trams from the Flexity range from Bombardier, consists of pultruded GRP elements with gluedon end caps, which have been milled, glued, primed and painted. Optionally, the 656 mm wide roof panel can also be manufactured with a gluedon bracket. It has fire protection in accordance with NF F 16101 and DIN 5510. For new projects, we also meet fire protection requirements in accordance with EN 45545.

PNEUMATIC NAILERS FOR HEAVY STAPLES S29, section 2.10 x 1.80 mm, width 22.9 mm, length from 75 to 160 mm. USES: fixing insulation panels in the construction field. Available models: S29.130 model for staples with length from 65 to 130 mm. S29.160 model for staples with length from 65 to 160 mm.

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. Thermal resistance = 3.2 m2 K/W Thermal coefficient 0.3 W/m2 K (=RC Warde) Features: Sealed cover with inlaid insulation panel. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV thermo cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For areas inside buildings where a cover with insulation properties is required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding...

Module-T modular construction manufacturer provides modular buildings for office use and various work spaces. The modular office building is made up of prefabricated containers of a standard size of 6×2.50 that are juxtaposed and superimposed to form large spaces on one or more levels. All our modular offices are made to measure to meet the requirements of comfort and aesthetics as well as thermal and acoustic performance. The thickness of the internal and external insulated sandwich panel walls varies from 50mm to 200mm. Below are some examples of modular office layouts shipped in kit form. These modular constructions are quick to install.

Module-T modular construction manufacturer provides modular buildings for office use and various work spaces. The modular office building is made up of prefabricated containers of a standard size of 6×2.50 that are juxtaposed and superimposed to form large spaces on one or more levels. All our modular offices are made to measure to meet the requirements of comfort and aesthetics as well as thermal and acoustic performance. The thickness of the internal and external insulated sandwich panel walls varies from 50mm to 200mm.

Square acoustic wood wool is a sound insulation material that has gained a decorative appearance by mixing cement and poplar wood fibers. Acoustic wood panel insulation plates serve as heat shields and protect them from possible fire. As a result of the tests and tests made according to national and international standards, it is determined that the cementitious wood wool insulation board is not flameresistant and that if it is forced, it is burned by ash so as to form smoke with minimum flame effect, does not form flaming drips, does not flow. Square Celenit wood wool is decorative material used in acoustic sound insulation applications, sound insulation works on walls and ceilings. It is also preferred in acoustic environments such as meeting rooms, call centers, conference rooms, and even in mechanical environments. Especially in offices, meeting rooms, etc., you can improve the quality of the business environment

Stainless steel digester with a digester chamber volume of 200 to 5000 m3 External panel heating and insulation Optimised diameter to height ratio for optimum mixing and minimal stirring Flexible stirring technology which can be adapted to the substrate and digester Stirring technology can be maintained without having to empty the tank

prefabex temporary flat pack house are 100% prefabricated in the factory providing ready to use buildings that are fully insulated and include electrical and sanitary installations. Hundreds of designs and interior layouts are possible and buildings can easily be demounted and moved to new locations. Our portable Flat Pack house container buildings have a flexible steel modular construction system which allows for individually designed space solutions with many layout options. By installing partition walls any room size can be created to suit your requirements. The modular flat pack house container buildings are made of insulated sandwich panels and steel. Dimensions are carefully studied so that 10 units can be loaded in one 40'HC shipping container. Prefabex flat pack containers are easy to assemble, disassemble and transport.

prefabex modular flat pack buildings are all fully insulated, and due to their unique construction system, they can be easily situated in any desired location. They represent also perfect solution for Worksite Buildings, Office and Living Containers, Home Offices, School/College Classrooms, temporary housing and storage, Marketing Suites and Site Accommodation. Standard features of our modular building products: Simple assembly Easy transportation Modular system allows you to join units together side by side Design flexibility Thoughtful services before and after sales Low cost insulated walls and ceiling panels

Area of usage o prefabricated guardhouses and kiosks – Guard for control and security of construction sites and sensitive areas – Observation cabin related to the work on the construction site – Ticket booth – Kiosk for different pointsofsell Our stands and kiosk sandwich panels consist of rockwool, polyurethane or polystyrene insulation with a minimum thickness of 40 mm. Walls high galvanized and painted steel surface or aluminum surface sandwich panel walls. Guardhouse container with an inner and outer rockwool, polyurethane or polystyrene foam insulation sandwich panel walls. Door and window profiles aluminum or PVC with the following options large window, oriel window, sash window, aluminum or PVC shutters, shades, steel bar for doors and Windows to prevent unauthorized entering). Floor covering Construction site cabin and kiosk with pvc vinyl flooring (optional parquet, ceramic, steel or aluminum sheet). Possibility to add sanitary system

prefabex FLAT PACK OFFICE are manufactured and supplied as a complete package which includes the building structure, sandwich panels, all of the internal and external finishes, doors and double-glazed window units, plumbing installation and the electrical system and lighting. Modular FLAT PACK OFFICE containers are designed to provide optimal comfort. The walls, and ceiling are made of insulated sandwich panels providing a controlled internal environment with optimum insulation values. Internal partition walls and external doors are also fully insulated. Flat pack buildings can be configured very quickly by joining modules together side by side or end to end, or by stacking them to create two or even three-story buildings. The main advantages of flatpack containers are their economic prices and quick assembly.

Available in both Aluminum and PVC High Quality Door Panels Max Size for PVC: 850X 2070 PVC Sheets:1,5mm Thickness:24mm to 44mm Glass: Outside Laminated inside satinated glass High Quality ALU Door Panels Max Size for ALU: 900X 2000 ALU Sheets: 1.5 mm 5005 Alloy Brand: Akzo Nobel Qualicoat Class 1 Electrostatic Powder Coating Thickness:24mm to 44mm Glass: Outside Laminated inside satinated glass Packing: Cartons or Pallets Min.Order. Quantity: 15 piece to 1 container

Available in both Aluminum and PVC High Quality Door Panels Max Size for PVC: 850X 2070 PVC Sheets:1,5mm Thickness:24mm to 44mm Glass: Outside Laminated inside satinated glass High Quality ALU Door Panels Max Size for ALU: 900X 2000 ALU Sheets: 1.5 mm 5005 Alloy Brand: Akzo Nobel Qualicoat Class 1 Electrostatic Powder Coating Thickness:24mm to 44mm Glass: Outside Laminated inside satinated glass Packing: Cartons or Pallets Min.Order. Quantity: 15 piece to 1 container

Produced similarly to the ISO-TECH system, MAXI-TECH is produced by using reinforced aluminum in the same wavy form to form the skeleton of the Panaspacer. It has polymer material used for thermal insulation and foil produced with triple lamination technology. Unlike the ISO-TECH system, it consists of making the aluminum surface stronger by covering it with an extra rubber material. MAXI-TECH has unique properties in terms of insulation and strength.