Installation of lifts - Import export

Fast, safe and convenient car parking. Faster parking for added flexibility Parking spaces are in short supply! When space for access ramps becomes an issue, we provide the optimal solution. The hydraulic car elevator TRAFFICO transports both car and passengers quickly and reliably to the desired parking level. A wide selection of options is offered for this classic car lift to meet individual requirements. Convenience important? The most convenient way to initiate operation is by remote control or smart card. The reader can be installed next to the lift entrance on a pedestal, for example, with pull wire switches at each level. Light beams between the cabin and shaft doors avoid any damage to the car during entry and exit. Light barriers facilitate vehicle positioning, thereby speeding up access. In the case of systems with two stopping points, the journey to the other level commences automatically as soon as the vehicle is positioned correctly.

The receiver bush is for quick and safe insertion of ball operated lifting pins. They offer an easy and reliable installation in a variety of lifting materials. Also for use with thin walled materials and blind holes. They are corrosion resistant with low wearing.

Our prefabricated containers are used in offices, housing, toilets, showers, construction site stores or as storage containers for waste and hazardous products. The modular container is delivered demounted in a compact protective packaging (flat packed container). This packaging facilitates the loading and unloading of the goods as well as sea and river transport in areas that are difficult to access. A 20-foot prefabricated office container with a front door and two windows weighs an average of 1350 kg and can be assembled in two to three hours using simple tools such as a screwdriver. The assembly does not require any welding, the structure of the bolted type modular prefab container is made of highly galvanized and painted light steel. It is nevertheless necessary to provide a small lifting device of the manitou type during assembly for lifting the ceiling frame. Once the modular container is installed, you can move it by lifting it according to the instructions provide.

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. Thermal resistance = 3.2 m2 K/W Thermal coefficient 0.3 W/m2 K (=RC Warde) Features: Sealed cover with inlaid insulation panel. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV thermo cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For areas inside buildings where a cover with insulation properties is required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding...

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Fire protection panel on stainless steel Z-brackets, fire-resistant seal. Features: Accurately-manufactured smell proof access cover. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. Fire test certificate: The Austrian test certificate issued by the Institute for Fire Protection Technology and Safety Research (IBS) confirms that HAGODECK Type BV-F90 steel resists a fire for 90 minutes and thus significantly contributes to safety in the event of a fire. In accordance with EN 13501-2, Type BV-F90 is classified in fire resistance class REI 90 (a ↔ b). The Lift-Off opening system: Every HAGODECK Type BV-F90 steel cover comes with a set of lifting keys and precise installation instructions. After lifting out the cover, the fire protection panel can be removed using its grab handle. The shaft is...

STURDY BIG BAG HOLDER Big Bag lifting beam with 2000 kg capacity suitable for lifting and handling the classic Big Bags 90x90x120 cm. The grip of the big bag is very safe and takes place by hooking it on the 4 corners. The lifting beam can be installed on the forks of a lift truck by placing it in the appropriate seats or it can be used with a crane or bridge crane.

Load capacity: 125 kN test load EN 124. Material: Grade 304 stainless steel. Passivated after welding. Also available in grade 316 stainless steel on request (no stock item). Features: Accurately manufactured fully sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. The Lift-Off opening system: Every HAGODECK Type BVE stainless steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where exceptionally high standards are needed or where the hygienic properties of stainless steel are preferred, e.g. in the food industry, in meat-processing areas, dairies, hospitals, swimming pools. For indoor swimming pools only use grade 316 material! Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal...

The PROJECTOR LIFT MVS 30-15 is a versatile very compact projector lift that enables the installation of projectors in environments where particular aesthetical solutions are required. The product has been developed to be installed inside a false ceiling where very few space is available. You need inside the false ceiling only 13 cm. of minimum height to install lift and projector. The MVS 30-15 is supplied with an extremely silent motor that allows a descent of maximum 30 cm and can carry up to 15kg. The lift is supplied with two safety screws. * ceiling cover plate is NOT included

Luminaire with a real efficiency of 130lm / W and a color rendering Ra> 70, with optical group of tempered glass IK08. Smooth body that prevents the accumulation of dirt with gray anodized paint. Installation in both horizontal and vertical insertion rods, incorporates a level instrument for its correct adjustment with respect to the horizontal plane, being able to vary its inclination. With 6KV electrical protection between phase - neutral and 12KV between line-ground. Luminaire with integrated timer that allows the programming of five levels of light flow, according to the time slot of the luminaires. The opening mechanism facilitates access to the inside of the appliance, without having to bear any load. As an upper opening mechanism, it reduces the risk of the light unit being lifted during installation or maintenance.

TSCHAN TK barrel couplings are recommended for installation in crane lifting mechanisms, to connect the cable drum with the gearbox output shaft, as well as in winch conveyors and platform hoists. General features Torsionally rigid, compensate for angular and axial shaft misalignment Torque transmission by hardened steel rollers For use in crane/ hoist applications to support the rope drum Outer diameters up to 850 mm Wear indication Bores up to 400 mm Torques up to T Kmax = 685,000 Nm FEATURES AND APPLICATIONS TSCHAN TK barrel couplings are recommended for installation in crane lifting mechanisms, to connect the cable drum with the gearbox output shaft, as well as in winch conveyors and platform hoists. By selecting the coupling size (Table 1a/1b in the catalogue), it is necessery to consider the radial load (S T(N)), the dimension of the gearbox shaft (d min – d max) and especially the transmission torque (T) with the operating factor (K1) in Table 3 in the catalogue). Rigid...

TSCHAN® TKV of reinforced-material Power improved design Proven design, hub and housing of reinforced material to transmit higher torque and higher radial load by same designed space General features Torsionally rigid, compensate for angular and axial shaft misalignment Torque transmission by hardened steel rollers For use in crane/ hoist applications to support the rope drum Outer diameters up to 850 mm Wear indication Bores up to 400 mm Torques up to T Kmax = 685,000 Nm FEATURES AND APPLICATIONS TSCHAN TK barrel couplings are recommended for installation in crane lifting mechanisms, to connect the cable drum with the gearbox output shaft, as well as in winch conveyors and platform hoists. By selecting the coupling size (Table 1a/1b in the catalogue), it is necessery to consider the radial load (S T(N)), the dimension of the gearbox shaft (d min – d max) and especially the transmission torque (T) with the operating factor (K1) in Table 3 in the catalogue). Rigid...

TSCHAN® TKSG (SEB-design) Construction and design acc. to operation sheet of German Steel Iron Industry SEB 666212 Hub and housing of standard material - Additional retainer rings improve axial fixing of the barrel by created axial rope forces General features Torsionally rigid, compensate for angular and axial shaft misalignment Torque transmission by hardened steel rollers For use in crane/ hoist applications to support the rope drum Outer diameters up to 850 mm Wear indication Bores up to 400 mm Torques up to T Kmax = 685,000 Nm FEATURES AND APPLICATIONS TSCHAN TK barrel couplings are recommended for installation in crane lifting mechanisms, to connect the cable drum with the gearbox output shaft, as well as in winch conveyors and platform hoists. By selecting the coupling size (Table 1a/1b in the catalogue), it is necessery to consider the radial load (S T(N)), the dimension of the gearbox shaft (d min – d max) and especially the transmission torque (T) with the operating...

TSCHAN® TKVSG (SEB-design) Construction and design acc. to operation sheet of German Steel Iron Industry SEB 666212 Hub and housing of reinforced material - Additional retainer rings improve axial fixing of the barrel by created axial rope forces General features Torsionally rigid, compensate for angular and axial shaft misalignment Torque transmission by hardened steel rollers For use in crane/ hoist applications to support the rope drum Outer diameters up to 850 mm Wear indication Bores up to 400 mm Torques up to T Kmax = 685,000 Nm FEATURES AND APPLICATIONS TSCHAN TK barrel couplings are recommended for installation in crane lifting mechanisms, to connect the cable drum with the gearbox output shaft, as well as in winch conveyors and platform hoists. By selecting the coupling size (Table 1a/1b in the catalogue), it is necessery to consider the radial load (S T(N)), the dimension of the gearbox shaft (d min – d max) and especially the transmission torque (T) with the...

With the miniPilot product family (reactor, nutsche filter, scrubber) we offer miniplant pilot reactors for chemical process development, scale-up, process simulation and kilo-scale production. The reactors' explosion proof design (ATEX) and inert materials allow safe processing of solvents and acids in a completely sealed reaction vessel. The compact standard reactor setup can easily be modified, interchangeable reaction vessels of 5, 10 and 15 liter including interchangeable stirrers are available. The reaction vessel is installed on a lifting / lowering device to simplify opening and cleaning. The distillation glass overhead is built with flexible ball-socket joints for multiple chemical reactions under full vacuum. A clean-room setup and other materials are available to meet your specific process requirements.

Robust steel structure made of steel profiled tubes and sheet metal. The swivel unit is made on a support bearing. The platform is removable and is attached to the frame with 4 bolts with a semicircular head and has a 50 mm high fencing edge around the perimeter, which prevents the movement of the transported cargo. Supplied with cast or pneumatic wheels with a diameter of 250 mm. The lifting capacity of the TPO trolley depends on the type of wheels installed: Pneumatic wheels Ø 250 mm – lifting capacity up to 450 kg. Cast wheels Ø 250 mm – l/c up to 450 kg. Heavy-duty cast wheels with cast iron rim Ø 250 mm – l/c up to 600 kg. When joining pipes of different configurations and diameters, we use a special technology, in as a result of which the parts perfectly fit each each other, it is reliable and just beautiful It's not only beauty and grace, but and reliability. When bending pipes, the laws of physics must be strictly observed.

The home lift is a compact, stylish and convenient product that helps you move faster in your home space. The home lift is installed in private houses, villas and maisonettes. EMAK Homelift is a highly cost-effective investment that will add value to your home and most importantly your lifestyle and independence.

The steel structure is made of high quality material that can easily support the weight of the elevator, which allows us to speak with confidence about the safety and durability of the EMAK steel structure. At the same time, aluminum shafts, which are used to install home lifts, are installed within a few days. All Joins by screw. The moduler aluminium shaft does not require a separate machine room – perfect for tight installations. It has a low pit requirement of just 15cm