Results for
TECHNIC MACHINES
Turkey
We have the one of the most up-to-date injection molding machine design. For example the construction of clamp pistons tighten centrally and working even without lubrication. Our plastic molding machines have wide column intervals and we provide them with euromap standards. With the help of proportional controlled valve direction you can achieve fast opening-closing possible with our plastic injection machine. Same point precision stop is possible with our molding machines. Also we have standard size holes and T slots according to Euromap standard on plates for injection mould changing. Our customer can have almost zero defects, scrap and failures with our plastic molding machines. Wit the help of our user friendly software, operator work pretty easy during plastic injection process.
Request for a quoteTECHNIC MACHINES
Turkey
We have the one of the most up-to-date pet preform injection molding machine design. Such as the construction of clamp pistons tighten centrally and working even without lubrication. Our pet preform molding machines have wide column intervals and we provide them with euromap standards on our pet preform injection machines. With the help of proportional controlled valve direction you can achieve fast opening-closing possible with our pet preform injection machine. Same point precision stop is possible with our pet preform molding machines. Also we have standard size holes and T slots according to Euromap standard on plates for pet preform injection mould changing.
Request for a quoteREP INTERNATIONAL
France
Horizontal range H49, H59, H610 The range is designed for easy implementation of automated production processes, namely injection moulding of more or less sophisticated technical parts. Clamping force available from 1,950 kN to 4,000 kN. Shown above press types H49, H59 and H610 (with and without brush).
Request for a quoteREP INTERNATIONAL
France
Lean range G10 Core The G10 is the 10th generation of REP injection molding machines. With its ergonomic design and intelligent onboard solutions, the G10 generation is branded "Infinitely Smart". The G10 is available in two versions, G10 Core (Lean range) and G10 Extended (Performance range), designed to better meet the varied needs of customers. Lean range G10 Core Vertical rubber injection molding machines REP ideal for less demanding processes. The G10 Core range exists with three clamping forces 1,600 kN 3,050 kN 5,100 kN.
Request for a quoteREP INTERNATIONAL
France
Machine features Closing force 3,200 kN. Size of the platens 1,250 x 630 mm. Injection volume 1,000 cm³. Machine developed for largeseries injection molding involving parts with inserts, such as for example the injection molding of housing seals.
Request for a quoteREP INTERNATIONAL
France
CFrame Injection molding machine V19. Optimized floor space and maximum accessibility. The V19 is an advanced Cframe press of 400 kN available in 2 versions, plastic or rubber injection. Its accessibility from three sides makes it ideal for the injection molding of profiles and extruded hoses.
Request for a quoteREP INTERNATIONAL
France
In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.
Request for a quoteREP INTERNATIONAL
France
URP Joint venture United Rubber Machinery Strategic Alliance for Asian injection molding machine market between REP and LWB Steinl,
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 1,100 kN. Size of the platens 335 x 400 mm. Injection volume 400 or 1,000 cm³
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 500 kN. Size of the platens 300 x 300 mm. Injection volume 125 cm³.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 1,950 kN. Size of the platens 450 x 450 mm. Injection volume 1,000 cm³. The H49 is designed for Automated production. Injection molding (more or less simple parts). Low floor space and height requirement. An optimized cycle time. etc
Request for a quoteREP INTERNATIONAL
France
Type V710 Core 5,100kN G10 is the 10th generation of REP injection molding presses with two versions available, on the one hand the Lean range G10 Core and on the other hand the Performance range G10 Extended. The G10 Core is a machine line, which has been matched for less demanding processes. It features all major costoptimized functionalities and the expertise of REP.
Request for a quoteREP INTERNATIONAL
France
Type V410 Extended 1,600kN Machine features Clamping force 1,600 kN. Size of the platens 430 x 510 mm. Injection volume 1,000 cm³. Machine which is particularly used for the production of flat gaskets as used in fuel cell applications. This machine is available in our showroom « Area 111 » in Corbas (France) to perform your test runs for the injection molding of LSR parts.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 8,200 kN. Size of the platens 1,000 x 1,000 mm. Injection volume 2,000; 8,500 or 11,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet the various customer requirements with its embedded intelligent solutions. The G10 Extended range will progressively replace the G9 machines and extends from 1,600 kN (V410) to 10,200 kN (V910).
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 10,200 kN. Size of the platens 1,200 x 1,200 mm. Injection volume 5,000; 8,500 or 11,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet the various customer requirements with its embedded intelligent solutions. The G10 Extended range will progressively replace the G9 machines and extends from 1,600 kN (V410) to 10,200 kN (V910).
Request for a quoteREP INTERNATIONAL
France
Designed for the manufacture of highvoltage insulators (550 kV), this press is one of the largest presses made by REP. The dimensions of the parts to be injected explain the huge size of the press 660 mm in diameter, 2,600 mm long, moulded in one go. The production of a complete insulator is therefore performed in one or two cycles, thus significantly increasing the profitability and reliability of the parts. Machine features Closing force 24,000 kN Size of the platens 1,500 x 3,000 mm Injection volume 25,000 cm³ x 2 (2 injection units)
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 2,544 kN (station A) / 2 x 785 kN (station B & C). Size of the platens 630 x 500 mm. Injection volume 1,000 cm³; 2,000 cm³ or 5,000 cm³. The CMX (CompactMultiStation Generation X G10) is a 4station injection molding press 1 injection station (A), 2 curing stations (B and C), 1 demolding station (D). The CMX machine is available with two clamping forces 1,540 kN (CMX1) or 2,544 kN (CMX2).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
REP INTERNATIONAL
France
V410 LSR Machine features Clamping force 1,600 kN. Size of the platens 430 x 510 mm. Injection volume 1,000 cm³. Machine which is particularly used for the production of flat gaskets as used in fuel cell applications. This machine is available in our showroom « Area 111 » in Corbas (France) to perform your test runs for the injection molding of LSR parts.
Request for a quoteREP INTERNATIONAL
France
In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.
Request for a quoteREP INTERNATIONAL
France
The CMX (Compact Multi Station of the generation 10) This new machine replaces the former CMS generation and makes the third generation of rotary machines with 2 major innovations. Integration of the processcontrol system of the latest generation (generation 10) with all 4.0 functions. Product range with the CMX1 (160T clamping force) and the CMX2 (250T clamping force). New generation of 4station molding machines The REP solution for large productions with optimal efficiency 90% increase in productivity compared with a singlestation press. 68% increase in productivity compared with a press equipped with a double plate stripping kit. The CMX machine is available with two clamping forces 160T (CMX1) or 250T (CMX2).
Request for a quoteFERPLAST SNC
Italy
TABLETOP VACUUM PACKAGING MACHINE DZ 400 T WITH INCREASED TANK Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. The tank of increased sizes with rounded lid allows the packaging of products with maximum height of 180 mm and the vacuum pump with a capacity of 20 m3/h ensure high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.
Request for a quoteMESUTRONIC GMBH
Germany
metal separator was developed for the examination of plastic granulates, ground material and powders for metallic foreign bodies. It is used in the injection molding and extrusion areas for slow-flowing material columns. Both the detector and the ejection unit have been specially developed for this area of use. This results in top performance data for precision, operating reliability and ease of cleaning. Failsafe storage of all system parameters Digital signal processing for best detection Process- and condition monitoring Standardised system for a wide area of use Robust construction for maximum lifetime Highest precision in long-term operation Fast ejector for minimized material loss Dismantle without tools All components are easily accessible
Request for a quoteZS INDUSTRIES CO., LTD
China
Material: POM, PP, PA, PE, ABS Process: Injection molding Precision machining Extrusion Application: Agricultural machinery General machinery
Request for a quoteCRYOSNOW GMBH
Germany
• Small required space • Integration in injection molding machines, especially for in-mold-decoration • Easy installation on robots, linear axle and brackets • Separate 24V control of compressed air and CO2 • Liquid CO2 supply with CO2 cylinder bundles including dip tube or CO2 tanks • Short response time due to additional CO2 valve on the nozzle • Automated cleaning of injection molds, metal and plastic parts
Request for a quoteCUPASO DEUTSCHLAND GMBH
Germany
The TEC 20 form, fill and seal machine enables the production of bags made of polyethylene film from a flat film roll. The film can be neutral or coloured, with continuous printing or centred printing with print mark. The design of the machine and the low loading height allow ergonomic adaptation to a manual feeding station or easy connection to a feeding unit, such as an automatic counter, an automatic weighing system, an automatic assembly machine, an injection moulding machine, a conveyor belt or similar.
Request for a quotePEEKCHINA CO., LTD.
China
Manufacturing Process CNC Machining & Injection Molding Virgin PEEK Properties Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance.
Request for a quotePEEKCHINA CO., LTD.
China
PEEK Plastic Machining CNC Machining & Injection Molding PEEK Material Properties Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance.
Request for a quoteEC PLAZA
South Korea
How to use Single wall and PP containers Intended for essence, serum and face cream , eye cream etc 1. PP bottle Overcap : pp Pump : pp Container : pp 2. PP jar Outer container : ABS Inner container : PP Packing sticker : PE Jar : PP Lid : PE 3. Capacity & Size : 50ml Φ32.9 x139.8 30ml Φ29 x126.3 15ml Φ29 x94.7 80ml cap : Φ65 x 23T Container : Φ79.4 x 56T <Our Company> KUMSUNG TSC was established in 1997 as injection factory in packaging materials for cosmetic with only three injection machines. With continuous effort for quality and technology, KUMSUNG TSC is equipped one-stop process as well as become a credible company from local and oversea partners. On basis of honest, we always consider how we satisfy customers' needs and have strengthened quality and product power with variety. Homepage: www.kumsungtsc.com
Request for a quoteResults for
Injection machine - Import exportNumber of results
145 ProductsCountries
Company type
Category