Infrared electronic tubes - Import export

Carbon Infrared lamp, which is used especially in heating and drying processes, has acquired an important place in carbon infrared lamp heating systems with long life and water-based emiter. It has a long wavelength but has a fast response time. Filament is obtained by knitting and fixation of carbon fibers. Uses - Electrostatic Powder paint curing furnaces - Glue drying oven - Thermoform preheating line - Ram edge cola drying unit - Outdoor most sanfor edge drying - Egalized edge drying - Acrylic stress taking - Lamination machine - Age paint drying - Yarn dryer oven - Outdoor heating

The CS400 Kiln Shell Imaging System relies on the MP Linescanner, which provides continuous, accurate and real-time thermal images and temperature measurements for moving processes. With the ability to scan up to 1024 data points in a single scan, the MP Linescanner can provide a complete picture of even the highest speed manufacturing processes, ensuring an accurate temperature reading. Key Features: Multiple kiln support Added ThermoView TV40 Thermal Imager support (Additional hardware required) Added Pyrometer support – including Mi3 and Endurance units – for Burn Zone and Shadow monitoring (additional hardware required) Analog and Digital I/O (Wago) “One brick” resolution hot spot detection, even in shadowed areas CS400 System Software The CS400 Kiln Shell Imaging System features specially designed software, which relies on standard Ethernet ports. Because the graphic user interface is designed specifically for kiln applications

The ThermoView TV40 is a high-performance industrial fixed thermal imaging system that allows you to expand your understanding by providing continuous infrared and visual feeds to visualize temperature data. The TV40 offers a fully integrated temperature control, monitoring, and data archiving solution. With the ability to personalize your integration, the TV40 allows you to automate your process by programing unlimited "areas of interest," programable alarms, utilize advanced pass/fail logic, and perform safety or asset inspections. Feed the data to your PLC or view feeds remotely. Hardware The rugged TV40 thermal camera lets you visualize the temperature data you need anywhere in your process with reliable, high-quality 320x240 and 640x480 infrared resolution options. Several key features: IP67 (NEMA 4) housing that guarantees long-term thermal imaging in the harshest environments (air purge and other accessories available) Simultaneous infrared and visible sighting

The Ircon Modline®7 infrared thermometers are designed for continuous temperature monitoring in nearly any application in industrial temperature process control. Offering four different models to choose from these rugged pyrometers feature an IP65 (NEMA 4) enclosure, standard motorized focus control, as well as through-the-lens and laser sighting. With extended temperature ranges, high resolution optics and fast response times, the Modline 7 provides the versatility to solve your most demanding applications. An intuitive sensor design, with integral water cooling in a stainless steel enclosure or high temperature waterjacket, reduces installation and setup time. Standardized installation accessories and common ModView™ Pro software platform minimize multiple product configurations at your factory. ModView™ Pro Software Modline 7 series features a suite of software programs and utilities to interface with the sensors, including ModView Pro software. With built-in user interface

Single color, two color and fiber optic models Temperature range: 50 to 3200 °C (122 to 5792 °F) Superior optical resolution to 300:1 Spot sizes down to 0.6mm (0.02 inch) Fast response times down to 2 ms Easy adjustment with manual variable focus integrated head optics Through-the-lens sighting, with optional laser, LED or video aiming function Compact, rugged housings with IP65 (NEMA-4) rating Ethernet, Profinet and EtherNet/IP options Programmable relay output for control Simultaneous analog and digital outputsThe Fluke Process Instruments Endurance® series has been designed to meet the requirements of modern industry that allows you to integrate with all major control systems quickly, easily and seamlessly. The series are available in single color, two color and fiber optic Endurance models. The innovative Endurance® Series of low-temperature and high-temperature two color pyrometers meets all requirements of modern industry: it is flexible and easy-to-install; durable to withstand

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

QSun-C Ceiling Mounted Infrared Heater is adapted for installation to the "ARMSTRONG" type suspended ceiling grid or can be mounted at any height above the floor level using the included mounts. QSun-C saves your room space and electricity costs by delivering sun-like warmth directly to the people without heating the surrounding air, and not disturbing dust. Only 15 mm thick ceiling heating panels look elegant and aesthetically pleasing, seamlessly blending into any interior. Effective heating area - 8-12 m².

QSun-M1 (800W) is good for 5-12m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-M2 (1600W) is good for 8-15m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-A2 (1600W) is good for 8-15m2 depending on the insulation level. Equipped with a remote control. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-M3 (2400W) is the most powerful heater in ceramic M-series, it can cover up to 10-20m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

Ceramic Force EIP-2 (380V) infrared heaters for industrial use are designed for indoor and outdoor heating applications to deliver maximum performance and cover large spaces. They do an excellent job at factories, warehouses, workshops, stadiums, big garages and pavilions. 3 models are available with wattages: 5850, 7200 and 9000W. This power is enough to cover 40-100m2 depending on thermal insulation and surrounding temperature. Parabolic arrangement of infrared emitter rows allows you to create a heating zone with a volumetric 55-95 degrees angle. Thus, minimizing energy losses from heat dissipation outside the zone of directed infrared rays. EIP Heating panels can be mounted on a wall or a ceiling. Radiating surface angle can be set from 0 to 60 degrees. Each electric heater has a thermal sensor connected to a three-phase electric power thermostat, which controls the heating process according to the preset temperature.

For infrared heating in production processes that require a specific shape, Victory can produce contoured infrared lamps. They can be made to any shape and are available in a variety of finishes. Contact us to discuss your specification. Applications include Joining and welding plastic parts, Drawing glass or plastic fibres, Heat shrinking, Adhesive curing and Butt welding.

EUROLINIA offers custom designed control systems from small single heater controls to large multi-zone systems for reliable, economical, and efficient heater performance to ensure precise process temperature control. Some clients, in order to cut costs, underestimate the importance of using appropriate control systems and, as a result, cannot get effective uniform heating and desired quality of the final product. When we develop a control unit for our infrared heating system – we guarantee that the final product will meet all requirements and expectations.

-IP67 Certified Waterproof Heater -High-intensity infrared technology -1.2 µm short wavelength -2100C filament temperature -230 VAC operating voltage -3000 Watt power consumption -800mm overall height -2 mm aluminum body structure -IP67 Certified - Mounting structure compatible with wall, hanger and foot apparatus -Ease of assembly and disassembly -Does not require maintenance-repair -Maximum heat transfer with the help of parabolic structure and reflector -Black anodized finish

EUROLINIA infrared industrial tunnel ovens are designed to rapidly and uniformly heat the surface of cables, wires, polymer pipes and tubes, dry fiber optics and etc. in batch or continuous conveyor production using targeted high-intensity infrared radiation. High efficiency is achieved by concentrating high-intensity infrared radiation and by using a circular reflector that efficiently distributes radiant energy inside the heating chamber. Additional efficiency is gained by installing three-level thermal protection. EUROLINIA tunnels have modular structure: one heating section is 2 meters long, you can connect up to 8 sections in one production line. Maxumum temperarature in the tunnel can reach up to 700C. Tunnels can have multiple separate heating zones and can be equiped with a conveyor. To ensure high-quality, high-precision surface heating, industrial tunnel ovens are also equipped with an automatic heating control system (APCS).

All EUROLINIA infrared panels are manufactured according to the client’s application and include high precision control systems to perfectly match the required production process. They feature extremely high reliability and durability, resistant to corrosion, high humidity, and condensation; dust, pollution, and most chemical compounds resistant. Infrared panel is usually divided into several operating zones. The heating intensity of each zone is automatically adjusted based on the data received from the thermal sensors located inside the ceramic emitters equipped with a thermocouple. This ensures compensation of heat losses at the edges of the product and helps to avoid overheating in the center. All infrared panels are assembled at our facility from scratch to the final product. We run multiple tests to make sure they are 100% in line with all the requirements and expectations. Our clients are welcome to attend such tests.

EUROLINIA Industrial Infrared Ovens are designed for high-precision surface heating of various materials and products by directional infrared heat. Precise temperature control, sperate heating zones, custom software for your application. Optionally ovens can be equipped with protective steel curtains for instant heating termination or inertia-free start/stop system. Maximum temperature of the infrared ceramic emitters is 750 °C. Maximum temperature inside the oven is 450°C. Maximum power density on the surface of the heated product up to 30 kW/m2. 380V.

Tests of Victory PET lamps against a major competitor show that they provide more heat energy per Watt, so will save money for the user. They also have longer life than many competitors, which reduces replacement cost. They are available in a clear finish for use with external reflectors, or with a reflector coating. This coating focuses infrared heat forward in the direction where it is required, reducing the loss of heat to the rear and improving efficiency.

Ceramic Force EIP-1 (380V) infrared heaters for industrial use are designed for indoor and outdoor heating applications to deliver maximum performance and cover large spaces. They do an excellent job at factories, warehouses, workshops, stadiums, big garages and pavilions. 3 models are available with wattages: 3900, 4800 and 6000W. This power is enough to cover 20-60m2 depending on thermal insulation and surrounding temperature. Parabolic arrangement of infrared emitter rows allows you to create a heating zone with a volumetric 55-95 degrees angle. Thus, minimizing energy losses from heat dissipation outside the zone of directed infrared rays. EIP Heating panels can be mounted on a wall or a ceiling. Radiating surface angle can be set from 0 to 60 degrees. Each electric heater has a thermal sensor connected to a three-phase electric power thermostat, which controls the heating process according to the preset temperature.

ELCON BH-1500 INFRARED HEATER -IP67 Certified Waterproof Heater -High-density Infrared Technology -1.2 µm short wavelength -2100C filament temperature -230 VAC operating voltage -1500 Watt power consumption -400 mm overall length -2 mm aluminum body structure - Mounting structure compatible with wall, hanger and foot apparatus -Ease of assembly and disassembly -Does not require maintenance-repair -Maximum heat transfer with the help of parabolic structure and reflector -Black anodized finish