Industrial vibration control - Import export

The Structural Health Sensors combine a 2-axis accelerometer with a temperature sensor. Their enhanced internal surge protection and electromagnetic interference immunity make them particularly suitable for the permanent monitoring of outdoor tall structures. The Structural Health Sensors can perform measurements in extreme conditions ranging from -40°C to +85°C. They are of course dust and watertight to IP66. We have a proven track record of several thousands of such sensors operating reliably around the world.TYPICAL USE Permanent outdoor monitoring of tall structures FEATURES Acceleration measurements along 2 axes Temperature measurement of the surface the sensor is attached to Signals transmission through 4-20mA current loops Embedded Lightning Protection Operation down to -40°C MODELS Standard High Resolution

Based on a individual needs assessment we tailor-make briquetting solutions including peripheral devices.

The Recovib.Tiny is a 3-axis shock & vibration data logger. It is extremely practical for a vibration diagnosis, offering up to 6 hours of measurement. Its wireless technology and intuitive operation provides substantial time savings in the performance of your measurements. It is the only type of vibration and shock recorder that allows several sensors to be used simultaneously in a synchronized manner enabling the performance of modal analyses and operational deflection shape analyses on large structures such as bridges or Walkways. It is able to record 1024 acceleration values (shocks and vibrations) per channel per second. The RECOVIB Tiny is the smallest, lightest and the most robust recorder on the market that is able to perform recordings in extreme conditions ranging from -10°C to +50°C. It is also dust and watertight to IP65.

Low deflection in all axial directions Elements from 0.50m | 0.75m | 1.00m | 1.50m | 2.00m | 3.00m | Special lengths available. Inclination continuously adjustable up to +30° and -15° at the element joint. Quick assembly of the elements thanks to the patented tube-screw connection system

Brackets & adapters for compressed air external vibrators There is a mounting option for almost every formwork system. If not, we will construct a mount.

RuMoo compressed air vibrator RM - the external vibrator that can be controlled on the device The RüMoo compressed air vibrator is a new development. Air pressure and air volume, i.e. the speed and thus the vibration behavior, can be regulated on the housing of the RüMoo compressed air vibrator. This means that fine adjustments can be made in a way that was previously not possibleA wide variety of rotor weights can also be installed in the RüMoo type RM compressed air vibrator. As a result, the centrifugal force can be increased by a factor of approx. 1.8 in the same housing, for example, by changing the rotor weight. A cost-effective alternative to performance variability is therefore given. The rapid start-up of the RüMoo add-on vibrator runs through the natural frequency of the respective component in a matter of seconds, a component is dynamically stressed as little as possible. With the RüMoo type RM60, concrete compaction depths of up to 80 cm and more

By assembling small MSB elements of 0.5m, 0.75m, 1.0m or 1.5 meters, it is possible to approach given radii - polygonally, both "positively" and "negatively". This is achieved by tightening or over-pressing the element clamps. Special elements with a rolled radius are also possible.

Suitable for the conversion kit for shaft-driven vibrating screeds. Own vibrating beam system - must fit - compatible with almost all SVM, SVE, Vario and Variant systems. Following the modular philosophy, the aluminum A-points are screwed onto the carrier plate and then attached to the T-profiles. The patented electrified upper belt, also suitable for Mooser MSB planks, serves as a carrier system. Elements of 50cm, 75cm, 1m, 2m and 3m can be delivered. It is therefore also possible to configure a complete screed with end pieces, vibrators, winches, etc.

All standard angle lengths from 0.50m to 3.0m can be used. Thanks to the kit system, the MSB small can be shortened or lengthened at any time by unscrewing or screwing on. The working width of the planks is approx. 5m. By clamping or overpressing the element clamps, radii can be approximated polygonally. Special elements with a rolled radius are also possible. The low overall height and the low weight enable use in places that are difficult to access, such as tunnel cross passage floors, tunnel intermediate ceilings or tunnel shoulders. Another area of ​​application are bridge construction sites (cap concrete/steel composite).

Due to the modular system, all attachments except for the three -point belts can be exchanged between the large and medium vibrating screeds. The MSB Medium has a maximum height of 35.5 cm thanks to the "Medium" three-point harness. The end pieces have been reduced in height but can be adapted with an attachment frame. The MSB Medium can be used up to lengths of 15 meters and more. In the case of short lengths, operation with a handle is possible. From approx. 4 - 4.5 meters we recommend using manual winches.

A programmable logic controller (PLC) is a general-purpose control device that automatically controls machinery, facilities and assembly lines by user defined programs. It also has a variety of communication functions for sequence, motion and process control.

Inverter Drives, PLCs, HMIs, MCG, Relays, Timers, Switches & Isolators, Transformers, Power Supplies, DIN Terminals and Terminals