Industrial component cleaning - Import export

Service Cleaning: Our customers count on our contract cleaning team for their daily cleaning needs -. With modern cleaning processes e.g. thermal with pyrolysis, aqueous with ultrasonic or mechanical with lapping blasting we can clean and improve your high quality tools. Whether extrusion or injection molding tools, extruder screws, hot runners, nozzles, filters, molds, screens, adhesive or coating devices - everything will be cleaned by us for you! Detailed advice and documented cleaning of samples ensure consistent results over a long period of time. Test us - In addition to comprehensive advice, we offer you the opportunity to carry out your own cleaning trials of workpieces up to a length of 3 m and / or 4 t in weight. Cleaning trials: Every customer can convince himself of our offer by a free sample cleaning. Whether cleaning, surface treatment or decoating - with us you as a customer can see the result even before the first order!

WIWOX® MT micro blasters are used for precise blasting with blasting nozzles from 0.4 – 1.8 mm. Surfaces can be smoothed, matted, deburred or cleaned. All mineral media, e.g. glass beads, broken glass, corundum, silicon carbide in the grain size range from 0 to 300 mμ serve as blasting media. The abrasive is used only once. The blasted surface is reproducible. Only a compressed air connection is required to operate the equipment. Micro-Tip fine blast units are suitable as portable free blast units or in combination with a blast cabinet. Micro-Tip fine blasting technology is available as a pressure or injector process. All units are equipped with foot pedal, pressure regulator, manometer and carbide nozzles.

WIWOX® PYRO paint stripping and decoating oven for particularly large and heavy batches. Particularly powerful furnace technology for the highest demands. With state-of-the-art IPC control and industrial burner technology. This furnace series enables clean, reproducible process parameters as well as state-of-the-art exhaust gas treatment.

Thermal cleaning in the WIWOX® IGS thermal system at up to 500° C removes all organic residues, even from fine bores. Depending on the melting and decomposition point of the residues, they are either melted or pyrolysed. The resulting exhaust air during the carbonization phase is burned in the afterburner chamber at over 850° C. Cleaning in the pyrolysis process requires subsequent post-cleaning. Inorganic components, oxidation residues, corrosion, etc. remain on the tool surface and must be removed. The ultrasonic process with acidic or alkaline cleaning media or the blasting process with organic and mineral abrasives are suitable for this purpose.

WIWOX® Spintec top loader spray chamber washing systems are the solution for fast parts cleaning in maintenance! The parts to be cleaned are placed in the washing basket of the system from above. During the washing process, cleaning fluid is sprayed onto the parts from below, above and from the sides. The basket rotates inside the machine, resulting in an even washing result. The detergent reservoir is located in the bottom of the machine and is also equipped with a heater.

WIWOX® VIVERK are single and multi-stage spray chamber cleaning systems for aqueous cleaning, pretreatment and degreasing of tools and parts. Loading takes place via an extendable platform, which can be loaded at an ergonomic working height. The workpieces are mechanically cleaned by means of pump pressure in the spray chamber process. The temperature-controlled washing liquid is sprayed onto the workpiece via a spray frame.The washing plant is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

Single and multi-stage spray chamber washing systems for industrial cleaning and degreasing of tools and parts. Loading takes place via an extendable loading platform at ergonomic working height. Before cleaning, the loading basket is loaded and moved into the rinsing chamber. The individual stainless steel washing nozzles can be easily maintained and adjusted according to the application. The motor-driven spraying rotor completely revolves around the loaded parts. The washing system is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

WIWOX® DP-EU pressure blasting cabinets clean and process tools and parts in just a few seconds. Fine blasting granulates are shot onto the surface by means of compressed air and remove dirt and corrosion. The blasting nozzle is manually guided during the processing of individual parts. Process automation is also possible. For this purpose, the workpiece or the blasting nozzle is moved by motor. The pressure blasting process is suitable for the removal of all solid, exposed residues and layers, especially on metallic surfaces of production tools and high-quality machine parts. Deburring and finishing of surfaces is also possible. In extensive tests with your tools you can convince yourself of the economic efficiency of our system. We will provide you with a test facility for this purpose after consultation.

WIWOX® DI-EU injector blasting cabinets are designed for use in production and maintenance. Ready for use equipped with integrated cartridge filter and abrasive recovery system. Economical operation with fine-grained abrasives with low air consumption of approx. 800 l/min. at 6 bar blasting pressure. The blasting media is continuously sucked out of the cabinet by a constant negative pressure and separated from dirt and dust in a downstream cyclone. A cyclone screen (possibly with ring magnet) collects coarse impurities. In this way, only clean abrasive remains in circulation. The used abrasive, dust and small impurities are led through the cartridge filter chamber to the dust collecting bucket.

WIWOX® DP-BB blast cabinets with combined blasting and blow-off function (Blast´n´blow®) and ex-protection accord. to 1999/92/EC for paint stripping and surface decoating in seconds. Fine organic blasting media get shot onto the workpiece by compressed air, whereby even stubborn thick layers are loosened in shortest time by the effect of the soft, but sharp-edged granulates. Even sensitive tool surfaces get not damaged. The blasting process is suitable for the removal of all solid, exposed residues, especially on metallic surfaces of production tools and high-quality machine parts. Blasting granulate and blasting pressure are adapted to the respective application. With the pressure blasting process you can clean extruder and injection moulding screws, blowing heads, moulds and profile tools much faster and more gently than with conventional cleaning methods. In extensive tests with your own workpieces you can convince yourself of the economic efficiency of our system.

WIWOX® 410 is a liquid, alkaline mould cleaning agent for the removal of burnt rubber and plastic residues from metallic surfaces. It is also used as a paint stripper. WIWOX® 410 is used undiluted for immersion cleaning of metal moulds. The construction material for the tank can be sheet steel or stainless steel. The tank size depends on the moulds to be cleaned. The pool can be heated from the outside or inside by a heating coil. The processing temperature is generally approx. 80° C. The processing time depends on the degree of soiling and the type of soiling between 10 – 30 minutes.

WIWOX® 340 is a weakly alkaline cleaning agent for grease, oil and oil carbon soiling. Very suitable for pre-cleaning or basic cleaning of soiled steel, cast iron and non-ferrous metal or plastic parts in an ultrasonic bath or in a spray cleaning system. After cleaning and without water rinsing, the parts are temporarily protected against corrosion. The final drying can be accelerated by blowing off with compressed air, a warm air flow or treatment in a drying cabinet. WIWOX® 340 can be used in a concentration of 5 – 7 %. Dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approx. 60° C. The bath should be kept at a constant temperature. In the field of precision mechanics, longer exposure times are possible depending on the degree of contamination.

WIWOX® 250 is a very alkaline cleaning concentrate for organic (oil, coal, grease etc.) and inorganic (magnesium, lime etc.) residues on tools and moulds. It can be rinsed off residue-free without a film on the surface. The concentration depends on the working conditions, the degreasing time, the degree of soiling, etc. (between 5 – 30 %). Regular replenishment by checking the bath can prolong its service life. In contrast to powder concentrates, lthe iquid formulation allows convenient use without danger of exothermic reaction in the plant.

The Solvent Sprayer is designed specifically for the spraying of solvents. Solvent resistant polyamide pump housing and resistant FKM seals. The graduations provide a clear visualization of the product level. The reinforced base ensures perfect stability. With multi directional and adjustable nozzle from mist to straight jet.

THE ADDITION OF ULTRASONICS TO THE MAJORITY OF CLEANING PROCESSES CAN REDUCE THE REQUIRED CLEANING TIME BY UP TO 80%. These hermetically sealed, modular stainless-steel submersible units are designed for use in new systems or retrofitted into existing systems to give you the benefits of ultrasonic capability. In order to obtain the best results, the number and location of transducers within the parts cleaning tank is determined based on the geometry of the parts cleaning tank and the type of contamination to be removed. The immersible transducers are designed for use in a heavy, industrial environment. The hermetically sealed welded housings are manufactured from 316 stainless steel and undergo a rigorous testing procedure prior to installation. The modular nature of the bolt-in units allows for flexibility with regard to the location of the submersible units and ease of access for service & maintenance … ** Click for more **

For precision component cleaning & degreasing applications. - For use with all aqueous detergents - All tanks manufactured in Staffordshire. - All stainless-steel construction – traceability certification available. - Pickled, passivated and electro-polished to extend operational life. - Heated tank utilising direct contact tube heaters for energy efficiency and longevity. - Thermostatically controlled. - Bolt-in removeable ultrasonic transducer plate. - Bolt-in ultrasonic transducers ensure minimal downtime and extend tank life. - Multi-frequency ultrasonic transducers. All ultrasonics use sweep frequency technology. - Separate ultrasonic generator. - Industrial standard – continually rated. - Insulated frame. - Basket and lid inclusive. - Table top or bench inset mounted. - Operates from standard mains voltage. - CE Certified – UL approval also available. - Etc. ** Click for more **

Single stage IPA solvent vapour component drying machine for critical applications – link to the Vapour Dryer whitepaper. - Does not require Zone 1 & 2 area – can operate in standard production environment. - Marangoni alternative - Water displacement technology. - PLC controlled for ease of use. - Vapour zone - Freeboard area - Ease of maintenance - Flexible process with ease of use via HMI - Retain your existing validated process - Fire protection and suppression systems. - Flammable vapour detection and handling facilities. - Solvent handling to facilitate the safe filling and draining of the process fluids. - Solvent re-processing system. - Internal automated product handling. - Exhausted environmental enclosure. - Primary cooling coils. Cooling water to be supplied by customer facilities or a local chiller can be supplied as optional. - Sealed sliding tank lid. - Manufactured entirely from stainless steel. - Etc. ** Click for more **

For precision component cleaning applications particularly, validated processes. - Designed to safely use all low-flashpoint solvent cleaning media including IPA, Cyclohexane & Acetone. - Does not require Class 1 Div 1 area – can operate in standard production environment. - All machines manufactured in UK. - All stainless-steel construction – traceability certification available. - Specialised fabrication available if required. - Pickled, passivated and electro polished to extend operational life. - Heated tanks have direct contact tube heaters for energy efficiency and longevity. - Drop-in ultrasonic transducers and heaters ensure minimal downtime and extend tank life. - Multi-frequency ultrasonic transducers. All ultrasonics used sweep frequency technology. - On board distillation ensures clean solvent continuously - Small footprint designed for clean room applications - Etc. ** Click for more **

Heat exchangers, tanks, containers, boilers, metal structures, pipelines, etc. are complex, so the most effective way to clean them is by using equipment with exceptional power. Our company has high-pressure cleaning equipment with working pressure of 1000 bar (193 l/min). These and similar technical parameters also apply to other industrial cleaning equipment operated by our company

The wet medium is sprayed through nozzles onto the surfaces of the parts. Particles are removed from the parts by kinetic energy, and then washed away. The cleaning result is primarily determined by the position and shape of the nozzles, the spray pressure and the volume of media applied to the parts. In industrial parts cleaning, the surfaces are then normally rinsed and dried.

Stainless Steel Body High Pressure Pump Test Report Printer PLC, Android Temp. Control Water Level Sensor Timer, Alarm Water Filters(10 and 100 micron) 100 Lt Tank Manual Door Hot Dryer CE Electric Panel All Apparatus included