Industrial cleaners - Import export

Strong alkaline degreaser with a formula specially developed to remove grease and dirt from any mechanical surface. mechanical parts and car engines. Removes oil residues, grease, fuel stains, old dirt deposits, dust and sludge. Does not attack rubbers, silicones, paint, varnishes or lacquers. It is not recommended to apply to aluminum components.

Cleaning of cooling devices, beverage and goods vending machines Cleaning of tiles, ceramics or natural stone Cleaning of construction machines and lorries, tarpaulins Cleaning of machine tools and workshop floors Advantages and benefits NSF A1 registered No classification marks according to (EG) No. 1272/2008 Free of organic solvents and phosphates Readily biodegradable Good separation behaviour Gentle to plastics, seals, rubber and sensitive metal surfaces Depending on the degree of soiling, can be diluted up to 1:10 Suitable for use with high-pressure cleaners MOSH/MOAH-free

Klineks formulation uses to clean for dirt, oil,dust and metal dust that occurs on heavy industry. It is used in the cleaning of automobile machinery mechanical spare parts in gear and chain cleaning. It is sold in as 10 kg and 20 kg. Also it has water repellent property and hydrophobic agents.

Usage Areas and Features: It is a very powerful degreaser. Does not contain flammable materials. It leaves absolutely no residue or sediments. It destroys the structure of the oil layers on the applied surface and absorbs it. The saturation rate is much higher than gasoline, diesel, thinner, etc., flammable and combustible materials. It does not have a corrosive effect on metals, does not rust and does not wear. It does not risk human health, does not harm nature, is biodegradable. Form of Use and Quantity: Applied by brush, dipping and wiping methods.

Detectaplast® hydro-alcoholic gel is a disinfectant hand gel. Barely a few seconds after application, this gel is instantly active and protects your hands. It is also a good alternative for hand washing when you cannot wash your hands with soap and water when your hands are not dirty. The use of this gel has the advantage of saving time and limiting skin irritation and dryness. Indeed, this hydro-alcoholic gel respects the skin of your hands. Hand cleaner for industry, laboratories, hospitals, the care sector, individuals, etc … USE : Moisten dry hands with 3 to 4 ml of this hydro-alcoholic gel and allow to penetrate for 30 sec. about. Then allow to air dry. Use several times a day as needed. To avoid overly dry hands, you can accompany this gel with our Rejuvenating Hand Cream.

Detectaplast® hydro-alcoholic gel is a disinfectant hand gel. Barely a few seconds after application, this gel is instantly active and protects your hands. It is also a good alternative for hand washing when you cannot wash your hands with soap and water when your hands are not dirty. The use of this gel has the advantage of saving time and limiting skin irritation and dryness. Indeed, this hydro-alcoholic gel respects the skin of your hands. Hand cleaner for industry, laboratories, hospitals, the care sector, individuals, etc … USE : Moisten dry hands with 3 to 4 ml of this hydro-alcoholic gel and allow to penetrate for 30 sec. about. Then allow to air dry. Use several times a day as needed. To avoid overly dry hands, you can accompany this gel with our Rejuvenating Hand Cream.

Barely a few seconds after application, this gel is instantly active and protects your hands. It is also a good alternative for hand washing when you cannot wash your hands with soap and water when your hands are not dirty. The use of this gel has the advantage of saving time and limiting skin irritation and dryness. Indeed, this hydro-alcoholic gel respects the skin of your hands. Hand cleaner for industry, laboratories, hospitals, the care sector, individuals, etc … USE : Moisten dry hands with 3 to 4 ml of this hydro-alcoholic gel and allow to penetrate for 30 sec. about. Then allow to air dry. Use several times a day as needed. To avoid overly dry hands, you can accompany this gel with our Rejuvenating Hand Cream.

Detectaplast® hydro-alcoholic gel is a disinfectant hand gel. Barely a few seconds after application, this gel is instantly active and protects your hands. It is also a good alternative for hand washing when you cannot wash your hands with soap and water when your hands are not dirty. The use of this gel has the advantage of saving time and limiting skin irritation and dryness. Indeed, this hydro-alcoholic gel respects the skin of your hands. Hand cleaner for industry, laboratories, hospitals, the care sector, individuals, etc … USE : Moisten dry hands with 3 to 4 ml of this hydro-alcoholic gel and allow to penetrate for 30 sec. about. Then allow to air dry. Use several times a day as needed. To avoid overly dry hands, you can accompany this gel with our Rejuvenating Hand Cream.

Suitable for a wide variety of applications from cooling circuits, dosing pumps, white goods, CIP systems for food industry, agricultural machines, industrial wet vacuum cleaners, to gear oil used in metalworking and mining, IST AG's new thermal OOL mass flow meter can be easily integrated into new or existing industrial systems. Its robust housing contains IST AG's well-established OOL technology that makes the corrosion resistant thermal mass flow ideal for flow monitoring of aqueous solutions, alcohols and oils, including aggressive liquids. Further features include: Calibration range: 1-200 kg/h Temperature compensated: from +5 °C to +50 °C Fluidic connection: tubing with 4 mm inner diameter Flow channel inner dimensions: 3.7 mm Single wetted material: stainless steel 1.4301 Response time t63: 0.5 seconds

The range of suitable accessories of well-known vacuum cleaner manufacturers is wide and constantly growing. Some examples are floor nozzles in various designs, exhaust air motor filters, telescopic tubes, bio waste bags, household filters, fragrances to absorb and much more.

You will find in our assortment: Various spare parts sets for vacuum robots also suitable for e.g. iRobot

You will find in our assortment: Exhaust air filters of different qualities e.g. M dust class, also in wet-proof, L dust class Micro-hygiene filter, one of our novelties in the assortment Micro-hygiene-filter + exhaust air filter in a set Motor protection filters in various diameters, thicknesses and designs for vacuum cleaners of well-known manufacturers

The synthesis dust filter bag has been a very high quality option for commercial cleaning for more than 10 years. The non-woven material is very robust, so that e.g. stones, light moisture and fine dust can be absorbed. In addition, dust retention values, separation efficiencies and durability have been improved. For these reasons, the Synthese dust filter bag is also increasingly used for light cleaning jobs. Synthese 3, 4 or 5 ply, filter bags with dirt flap, sliding closure or plastic connection, Synthese dust filter bags also in set with motor protection filter, household filter bags

WE CAN SUPPLY DYSON V12 DETECT SLIM CORDLESS VACUUM PLEASE DON'T HESITATE TO CONTACT US IN CASE OF ANY INTERESTED

You will find: Hard floor nozzle with swivel joint, two brush strips and two casters in different working widths and pipe diameters. Hard floor nozzle with horsehair with swivel joint, two brush strips and two rollers in different working widths and pipe diameters Wet floor nozzle with swivel joint, two rubber strips and two rollers with different working widths and pipe diameters

You will find: crevice nozzle in two lengths and pipe diameters Upholstery nozzle, with thread lifter in different pipe diameters Suction brush, with swivel joint in various pipe diameters Suction hose, complete with connections and hand tube Telescopic tube, various telescopic tubes in different tube diameters for vacuum cleaners of well-known manufacturers

You will find: Combination nozzle with tilt and turn joint and thread lifter in different working widths and pipe diameters. Combination nozzle with butt edge gentle on furniture with swivel joint and thread lifter, various pipe diameters Turbo nozzle with brush roller, tilt and turn joint and rollers with different tube diameters Nozzle flat design with tilt and turn joint and two thread lifters

You will find: Vacuum cleaner nozzle, div. vacuum cleaner nozzles in different working widths and suitable for different pipe diameters All-purpose nozzle GRD Professional for straight suction pipe with aluminum base body, castors height adjustable Wet floor nozzle GRD Professionell for straight suction pipe, aluminum base body, height-adjustable rollers Vacuum cleaner nozzles suitable for different pipe diameters

Cleaning of bearings and machine parts Removal of aged and gummy oil and grease residues Dissolving of silicone and adhesive residues Preparation of surfaces for bonding Advantages and benefits High cleaning action through optimally matched mixture of active substances Rapid, residue-free evaporation of the cleaner NSF K1 K3 registered Good compatibility to common plastics such as polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), polyethylene terephthalate (PET), polystyrene (PS), polyoxymethylene ((POM), polyvinyl chloride (PVC), polyethylene (PE), polytetrafluoroethylene (PTFE)

Cleaning of bearings and machine parts Removal of aged and gummy oil and grease residues Dissolving of silicone and adhesive residues Preparation of surfaces for bonding Advantages and benefits High cleaning action through optimally matched mixture of active substances Rapid, residue-free evaporation of the cleaner NSF K1 K3 registered Good compatibility to common plastics such as polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), polyethylene terephthalate (PET), polystyrene (PS), polyoxymethylene ((POM), polyvinyl chloride (PVC), polyethylene (PE), polytetrafluoroethylene (PTFE) OKS 2670 is suitable for use with the OKS Airspray system Also available as spray version OKS 2671

WIWOX® 340 is a weakly alkaline cleaning agent for grease, oil and oil carbon soiling. Very suitable for pre-cleaning or basic cleaning of soiled steel, cast iron and non-ferrous metal or plastic parts in an ultrasonic bath or in a spray cleaning system. After cleaning and without water rinsing, the parts are temporarily protected against corrosion. The final drying can be accelerated by blowing off with compressed air, a warm air flow or treatment in a drying cabinet. WIWOX® 340 can be used in a concentration of 5 – 7 %. Dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approx. 60° C. The bath should be kept at a constant temperature. In the field of precision mechanics, longer exposure times are possible depending on the degree of contamination.

New employees are first introduced to TIG welding in a basic training lasting several months. Only then are the first products manufactured for customers, whereby the following topics are handled in a multi-year development process, which includes the welding test for the tube welder CrNi relatively early: Material requisition Additional materials Gas protection Interpass temperature and welding temperature Maximum material temperature during welding Cleaning the weld seam Welding distortion Mechanical seam load

We provide you with many years of practical experience and innovative solutions from the initial idea through conception and planning to the development and production of your components. We focus on your individual requirements and ideas when it comes to different problems in component design: Welding distortion Processing of the component Weldability of the component Material selection Cost-effective implementation

Turning diameter over bed: 685 mm turning diameter over plan support: 510 mm Rotatable maximum diameter: 400 mm tip distance: 526 mm Traverse path: Z axis: 640 mm X axis: 240 mm Driven tools Polygon – recordings for fast conversion Tailstock

Traverse path: 800 x 900 x 600 A axle ± 140° C – axle 360° (endless) High precision machining centre in gantry construction All axles are double-equipped with motor and linear scales Zero point clamping system

Traverse path: 1250 x 1250 x 870 A axle ± 140° C – axle 360° (endless) High precision machining centre in gantry construction All axles are double-equipped with motor and linear scales Rotary axles are driven by torque motors Zero point clamping system

Machining is a generic term for various manufacturing processes such as milling or turning used to give workpieces a specific shape by removing excess material via mechanical influences. According to the wishes of our customers, we can realise high surface qualities with sealing surfaces as well as a dimensional accuracy of 10 μm. Machining can be used on a variety of different materials: Stainless steel Non-ferrous metals Nickel-based materials Titanium materials Plastics

The idea of the protective effect of argon was continued in our specially designed autoclave. In contrast to Wig – hand welding, there is 100% protection of the seam and root side. This leads to a weld seam not chemically affected by ambient gases.

Tungsten inert gas (TIG) welding offers many advantages over other fusion welding methods, such as the complete absence of spatter and low welding-fume emissions. Since TIG welding uses a non-consumable electrode, the process is ideal for welding so-called root passes or in forced positions due to the decoupling of current and welding consumables.