Industrial chemical products - Import export

Series of Synterol rolling oils are various combinations of low viscosity deep refined oil fraction and aromatic hydrocarbons. Used on cold rolling mills as a base oil for aluminum foil and strip rolling. As a rule, they are used in mixtures with appropriate additives, for example, with range of Synterol series additives that allow to select the optimal composition of the rolling oil to achieve the required operational properties and quality of rolled surface.

Synlube DU is a HFDU type fire resistant hydraulic liquid based on synthetic esters with a range of highly effective additives. It is used in oil hydraulic systems in which the working liquid can be heated above 70 °C and oil ignition in an emergency is possible.

Syndis DB05 is a liquid film-forming agent for dusting suppression and fixing the dust to a surface in breezy and dry lands. The product is a water dispersion of co-polymers of vinyl acetate and functional additives. Syndis DB05 is applied in order to form protective films on earthboard surface, to reinforce and preserve tailing dump, to prevent ore from loss because of weathering and to prevent the dust from transferring into the environment. The agent is water mixable by using the pump circulation or any other suitable device.

Syndis PG01 is a mixed reagent based on high-active surfactants that contain no hydrophobic substances of the polysiloxanes and mineral oils type. Designed to activate the capillary flow of liquid in the production hydrate in alumina production. Helps to remove bound moisture. The dewatering agent Syndis PG01 can be dosed both into the pulp supply of the last stage hydrate washing and directly in the drum filters. The consumption of the dewatering agent is 10 - 20 g/m3 of the pulp supply. The dosage is selected individually based on the dosing point and the degree of dilution.

Syndis N series are scale inhibitors developed by our company for the production of alumina. They are used at the evaporation stage, effectively eliminate scaling of hydroalumosilicates, hydrogarnets, carbonates inside the space of the evaporator plants. Based on a mixture of effective inhibitors of salt crystal build-up.

(Caustic Soda Flakes 98%) : Aqueous solution of sodium hypochlorite in demineralized/decalcified water, obtained from the reaction between chlorine gas and an aqueous solution of sodium hydroxide, both substances obtained with mercury-free membrane technology. Properties and applications production of hard soap, cleaning agents, exfoliating masks cleaning and disinfection in animal husbandry and bee-keeping obtaining aluminum in the steel and metallurgy industries pharmaceutical and chemical industry paper production in the pulp and paper industry refining of crude oil and mineral oils in the petrochemical industry industrial cleaning pH regulation in water treatment processes raw material in the production of pigments and dyes for paints Other chemical specifications formula NaOH CAS number1310-73-2 WE number215-185-5 Molar mass40 g/mol ADR UN1823 physical properties pH12,4 Melting / freezing point- 9°C (roztwór 7,5 %) Relative density2,12-2,13 g/cm3 (> 98,5 %)

Flutainer® offer perfect conditions for the transport and storage of liquids and paste-like goods. Additionally, they save valuable storage space, because they can be stored space-saving before they are filled and after they have been discharged. This flexible bulk container can be built up by only one person in less than one minute. Rigid containers need the same space, no matter whether they are empty or filled. Flutainer® are different: Flutainer® are only built up when they are needed, for example for liquid sugar, to store auxiliary material for textiles or powder which is sensitive to pressure. Flutainer® are made up of a fabric container on the outside and a multiple PE-inner lining, a wooden pallet, four steel poles and a stacking frame. Fields of application: Glue Dispersions Auxiliary material for textiles Dyes Squash Tomato puree Honey or liquid sugar Dust or granules sensitive to pressure Main industries: Construction industry, chemicals, pharmaceuticals, terrestrial and garden products, drinks and instant beverages, wood products and synthetic material, cosmetics, food, disposal of waste, other pet supplies, cleaning agents, components for further processing and refinement

Flexible Intermediate Bulk Container (FIBC) of the product range Quintainer® offer and efficient way of utilization of room space and an excellent stability during transportation and storage of bulk goods. Forming diagonally and crossed placed cut-off walls increase the stability of Quintainer® considerably. The higher form stability in comparison to the conventional container for bulk goods ensures a better utilization of room space while transport and storage. Quintainer®-FIBC are available for various types of pallets. Fields of application: Packaging of fine-grained and flowable powder of the chemical industry and granules of the synthetic and food industry. Main industries: Products for the agriculture industry, construction industry, chemicals, pharmaceuticals, terrestrial and garden products, wood products and synthetic material, food, disposal of waste, cleaning agents

Pactainer ED® offers a safe protection against electrostatic hazards. They can be used for bulk goods which contain or are located in areas where electrostatic hazards are at present. For example for the chemical industry. The conductive fabric of a Pactainer ED® conducts the charge of the bulk products to the hoist in connection with the grounded straps and prevents reliable every kind of discharge which displays a risk of fire. A micro-perforation of all coated components of the inside and outside of the container which are connected with each other, guarantees that they are able to discharge the electrostatic energy. This process has already been patented. Pactainer ED® offers further safety: If there is not direct grounding of the lifting loops, the carriers of the charge will be handed over locally and defined to the hoist. This is realized by a Carona-Effect. The Surrounding area is not subject to static charging. Fields of application: Transport and storage container for products produced by the chemical as well as paint industry for bulk goods of every kind – which own low minimum ignition energy. Main industries: Products for the chemical and pharmaceutical industry, wood and synthetic products, food, detergents

Taylor made packaging, transport or storage containers for every kind of bulk goods and every transport route from a volume of 200 litres up to a volume of 3,000 litres, are provided by the use of Pactainer®. Concerning such Flexible Intermediate Container (FIBC) which are subject to constant innovations, EMPAC belongs to today’s trendsetter in this business. Pactainer® are according to the requirements of their field of application made of flat or circular woven fabric, provided with a PP-coating or with PE-inner lining and produced as a single-use, returnable container or with a permission for the transport of dangerous goods. They are produced with different forms of tops and bottoms and filling and discharge spouts. Our range of products contains 1-loop, 2-loop and 4-loop Pactainer®. For special fields of application, we can offer various custom-built models as well as automatic Big Bags. Fields of application: Chemical raw material and end products Special chemicals Granules Fertilizer Raw material for the food industry Beverage concentrate Stones and raw material and supplies for construction Flyash API pharmaceutical substances Main industries: Products for the agriculture industry, construction industry, chemicals, pharmaceuticals, terrestrial and garden products, drinks and instant beverages, wood products and synthetic material, cosmetics, food, disposal of waste, other pet supplies, cleaning agents, components for further processing and refinement

Chemical appearance: The appearance of Sodium metabisulfite is either in the form of white crystals or as a powdered solid with a slight odor of sulfur. Inhalation could lead to toxic results and can cause serious damages to skin and tissue. Sodium metabisulfite is clearly soluble in water and forms a clear and colorless solution. Chemical application and strengths: The primary applications of Sodium metabisulfite are evident in the mining industry. It is used for controlling the depression of pyrites and sphalerite minerals. MBS is ideal for pH control for the froth flotation process, where it could control pyrite depression. Sodium Metabisulfite is also helpful in preventing flotation of sphalerite through copper activation with the availability of Tennantite/Covellite in the ore. In the case of pyrite flotation, the maximum iron/pyrite depression with the use of Sodium Metabisulfite is possible somewhere around the pH of 6.

Chemical appearance: Sodium Isopropyl Xanthate (SIPX) is available in the solid powder form or in the shape of pellets. SIPX has the appearance of white to yellowish deliquescent solid in the powder form. The color of the SIPX pellets varies from yellow to green. In the solid powder form, SIPX emits a slightly pungent odour. In the pellet form, SIPX emits a sulphur like odour. Chemical application and strengths: The strength of SIPX for collection is slightly higher than that of ethyl xanthate. Therefore, it serves as the perfect tool for the flotation of nonferrous metallic sulfide minerals in the form of a collector. Xanthates have been known for being an integral part of sulfide mineral flotation. SIPX is actually a salt that contains a non-polar hydrocarbon group that helps in the hydrophobic nature of sulfide material, thereby pointing out from the mineral to the solution. The salt also contains a polar group that adsorbs onto the sulfide mineral surface.

Zinc Chloride 98% is a very useful chemical compound having the chemical formula ZnCl2. Chemical Appearance Zinc Chloride 98% has the appearance of a white or colorless crystalline solid. It is hygroscopic and very deliquescent. It is odourless. It is highly soluble in water. Chemical Applications and Strengths Zinc Chloride 98% is an extremely efficient chemical compound and therefore, has many industrial applications. Its main applications and strengths are: Zinc Chloride 98% is most popularly used in the battery industry. It is used as a metallurgical flux. It reacts with metal oxides and gives derivatives of the idealised formula MZnOCl2. This reaction uses zinc chloride solution as a flux for soldering. It is used in organic synthesis. It is a very useful Lewis acid in organic chemistry. It is used as a catalyser for catalysing the conversion of methanol to hexamethylbenzene.

Chemical appearance: Sodium Isopropyl Xanthate (SIPX) is available in the solid powder form or in the shape of pellets. SIPX has the appearance of white to yellowish deliquescent solid in the powder form. The color of the SIPX pellets varies from yellow to green. In the solid powder form, SIPX emits a slightly pungent odour. In the pellet form, SIPX emits a sulphur like odour. Chemical application and strengths: The strength of SIPX for collection is slightly higher than that of ethyl xanthate. Therefore, it serves as the perfect tool for the flotation of nonferrous metallic sulfide minerals in the form of a collector. Xanthates have been known for being an integral part of sulfide mineral flotation. SIPX is actually a salt that contains a non-polar hydrocarbon group that helps in the hydrophobic nature of sulfide material, thereby pointing out from the mineral to the solution. The salt also contains a polar group that adsorbs onto the sulfide mineral surface.

Chemical appearance: Sodium Isobutyl Xanthate (SIBX) is available in the form of pale-yellow crystals or powdered form in the pure state. It is also available in the form of a solution. In the solid form, SIBX absorbs moisture from the air, and so, it is known as a hygroscopic substance. SIBX emits the odor of carbon disulfide that is somewhat the same as that of decaying cabbage. In some cases, SIBX can emit a very faint unpleasant, or sulfurousodor. SIBX is readily soluble in water and could form insoluble compounds with different metallic ions. The uses of Sodium Isobutyl Xanthate (SIBX) as a collector are widely known. It is a credible flotation reagent for different nonferrous metallic sulfide ores. It is primarily implemented for the flotation of copper, lead, zinc sulfide ores as well as the sulfide ores of other precious metals.

Chemical appearance: Sodium ethyl xanthate or SEX is typically a yellowish powder or pellet that is soluble in water. It is a xanthate based on the C2 alkyl ethyl alcohol in the sodium salt form. Chemical application and strengths: Sodium ethyl xanthate or SEX is used in mining as a flotation agent. It is used as a collector and xanthate used especially in copper mines. It can be used for flotation of various minerals that are activated or hydrophobic and float easily such as lead, cobalt, zinc and nickel. It can form insoluble compounds with these metallic ions. Sodium ethyl xanthate is especially important in in froth flotation, where it is used to separate hydrophobic materials from hydrophilic. In mining this is an important operation to recover sulfide ores. For ores such as copper, this process lowers the costs of recovering low grade ores and can save mining companies processing costs.

Chemical Appearance Sodium Amyl Xanthate (SAX) is a sightly yellow or grey yellow powder or pellet. It is soluble in water and decomposes easily in the presence of acid and heat. It has a very pungent odour. Chemical Applications and Strengths Sodium Amyl Xanthate (SAX) is an extremely efficient chemical compound and therefore, has many industrial applications. It is most widely used as a very strong collector in the mining industry. Its main applications and strengths are: It is used as a collector in the mining industry. Collectors are chemicals that selectively attach to the surface of the mineral, making the mineral hydrophobic. Hydrophobicity is necessary for air bubble attachment in the precious metal extraction processes. Sodium Amyl Xanthate is the most powerful collector among the xanthates. It is extensively used in the flotation process of sulfide ores.

Potassium Butyl Xanthate is a reagent that plays a pivotal role in modern mining and metallurgy. Flotation Process Facilitator: Potassium Butyl Xanthate is an indispensable ally in the flotation process, a cornerstone of mineral extraction. Flotation involves separating desired minerals from their ores. Selective Adhesion: When introduced to a slurry of finely ground ore and water, Potassium Butyl Xanthate selectively adheres to sulfide minerals present in the mixture. These minerals, often hosting valuable elements like copper or lead, exhibit a unique affinity for the xanthate. Bubble Attachment: Air bubbles are introduced into the slurry. The hydrophobic mineral surfaces coated with Potassium Butyl Xanthate collectors readily attach to the bubbles, effectively making them float to the surface. Rising to the Top: The mineral-laden bubbles rise to the surface of the flotation cell, forming a froth layer.

Chemical appearance: Potassium Amyl Xanthate (PAX) is available in the form of yellowish or pale-grey crystals or in the form of free-flowing powder in the purest state. PAX is also available in the form of a solution. PAX is highly water-soluble and emits a slightly unpleasant odor that is similar to that of carbon disulfide or that of decaying cabbage. Another property of PAX is the absorption of moisture from air i.e., hygroscopic nature. Chemical application and strengths: The properties of PAX as a Xanthate make it the ideal collector for various nonferrous metallic ores. Potassium Amyl Xanthate is the perfect choice for flotation processes of nonferrous metallic ores as a strong yet non-selective collector. PAX works effectively as a flotation reagent in the flotation of oxide minerals such as oxidized sulfide

Thiourea 99% is a very useful organic sulphur containing compound having the chemical formula N2H4CS. It refers to a broad class of compounds related to thioamides. Chemical Appearance Thiourea 99% has the appearance of a white solid. It is most often seen as a white powder. It is soluble in water. It has a bitter taste Chemical Applications and Strengths Thiourea 99% is an extremely efficient chemical compound and therefore, has many industrial applications. Its main applications and strengths are: Thiourea 99% is most popularly used as a thiox precursor. It is used as a precursor to Thiourea dioxide and this is a widely used reducing agent in textile processing. It is used as a flotation reagent for metal minerals. It is used as a corrosion inhibitor for metals. Thiourea is commonly used as a fertiliser. It has many desirable properties as a fertiliser specifically under the conditions of environmental stress.

Chemical appearance Sodium Thioglycolate or Sodium Mercaptoacetate has a light yellowish and sometimes dark color. It comes in a liquid form with a strong pungent odour and has a pH level between 7 to 11. Chemical application and strength Sodium Thioglycolate or Sodium Mercaptoacetate is a mining separator which is used mainly in the separation process of copper and molybdenum copper sulfide. It also acts as a galena inhibitor. It is also known as a powerful and effective depressant agent for copper sulfide which has gone through the separation process during considerable environment conditions. Great results are seen when this is used as a depressant instead of using sodium cyanide or sodium sulfide. Has the ability to enhance the recovery rate of various precious materials and metals during flotation. Should be kept in an environment free of water and moisture. Should also kept far away from fire or high temperatures. It is composed of carboxylic acid and thiol (mercaptan)

Chemical appearance Sodium Thioglycolate or Sodium Mercaptoacetate has a light yellowish and sometimes dark color. It comes in a liquid form with a strong pungent odour and has a pH level between 7 to 11. Chemical application and strength Sodium Thioglycolate or Sodium Mercaptoacetate is a mining separator which is used mainly in the separation process of copper and molybdenum copper sulfide. It also acts as a galena inhibitor. It is also known as a powerful and effective depressant agent for copper sulfide which has gone through the separation process during considerable environment conditions. Great results are seen when this is used as a depressant instead of using sodium cyanide or sodium sulfide. Has the ability to enhance the recovery rate of various precious materials and metals during flotation. Should be kept in an environment free of water and moisture. Should also kept far away from fire or high temperatures.

Chemical appearance Sodium Thioglycolate or Sodium Mercaptoacetate has a light yellowish and sometimes dark color. It comes in a liquid form with a strong pungent odour and has a pH level between 7 to 11. Chemical application and strength Sodium Thioglycolate or Sodium Mercaptoacetate is a mining separator which is used mainly in the separation process of copper and molybdenum copper sulfide. It also acts as a galena inhibitor. It is also known as a powerful and effective depressant agent for copper sulfide which has gone through the separation process during considerable environment conditions. Great results are seen when this is used as a depressant instead of using sodium cyanide or sodium sulfide. Has the ability to enhance the recovery rate of various precious materials and metals during flotation. Should be kept in an environment free of water and moisture. Should also kept far away from fire or high temperatures.

The CDA K-Net stands out as a semi-automatic filling machine designed for dosing and filling various liquid types, including fluids, viscous, and pasty substances, with an optional screwing system. Adaptable to different pumping systems, the K-Net finds compatibility with products spanning diverse sectors: Food processing (honey, oil, mustard, fruit juice, etc.), Paints and varnishes, Cosmetics (cream, ointment, body oil, etc.), Chemical industry (detergent, solvent, household products, etc.). Utilizing either an electromagnetic or mass flow meter based on the product type, the K-Net achieves an optimal production rate suitable for small and medium-scale operations, reaching up to 600 vials/hour, contingent on the product and container specifications.

Hydrochloric acid 31% is a colorless transparent liquid Also known as muriatic acid or spirits of salt It is an aqueous solution of hydrogen chloride with the chemical formula HCl(aq) Physical specifications: HCl is a strong and highly corrosive acid Yellowish liquid with a distinctive pungent odor, soluble in water and dissolves in alcohols but insoluble in hydrocarbons. Stability and reactions: Stable and incompatible with metals, organic materials, alkalis, explosives, epoxies Properties and applications Boiling point / range 50°C Relative density >1123 kg/m3 @20°C food & pharmaceuticals industry chloroalkalies production processes water treatment processes for drinking water and industrial water production of industrial& household chemicals mining industry production of biofuels, oils and lubricants, galvanising and zinc plating textile industry and tanning CAS number 7647-01-0 WE number 231-595-7 Molar mass 36,45 g/mol Customs tariff code 28061000 ADR UN1789

Klineks air conditioner and serpentine cleaner rips of all the oil, dirt, carbon and residues accumulated on cooling systems, air conditioners, honeycombs and apparatus on air conditioners, heating systems and aluminum metals. It creates a hygenic effect. Cleaning air conditioner is a recommendation for asthma and bronchitis patients. This product cleans and removes bacteria formed in filters and air conditioners over time.

Klineks would produced within average 14 days after determiting the customer needs and demands. Hydrophobic agents vary proportionally according to the need.

There are 2 types for application. If the production would sprayed and wiped, it sould be used 1/7 dilution ratio. If the production would be dipped, it should be used 1/15 dilution ratio. After applied the produc, needs to wait to dry. Then the surface could be painted. It can be used for all industry sector. It is sold in as 1 lt, 5lt, and 20 lt. Do not contact with hands.

It uses iron phosphate to clean on metal surfaces. It could be produced differents amounts according to demand of customer.