Results for
KONCAR - ELECTRONICS AND INFORMATICS LTD.
Croatia
KONČAR’s control system KONreg SHP 100 is all-in-one solution for full automatization of sHPP. Control, turbine governing, voltage regulation, synchronization, autonomous supply, protection and connection to network are just part of KONreg SHP1000 possibilities. An intuitive user interface ensures ease of use, manipulation and control of all the functions required for the safe and optimal operation of sHPP.
Request for a quoteLBI FOUNDRIES
France
Main products: impeller (Francis, Pelton Kaplan), sealing, bearing, wearing ring, labyrinth ring… Alloys: - bronze and brass - low allied and pure copper - aluminium bronze - aluminium - stainless steel - Ni-based and special alloys
Request for a quoteH2 CORE SYSTEMS GMBH
Germany
The tank serves as a reservoir for demineralized water and supplies up to 11 AEM electrolysers. A conductivity sensor provides the supply of the electrolysers with <20µS. Capacity 38 L Max output water flow 3.8 l/min.
Request for a quoteH2 CORE SYSTEMS GMBH
Germany
Fuel cells can be integrated into our modular and scaleable H2 Core systems and complete them in case of the easy and reliably conversion of the produced hydrogen back into electricity. They are available in several power output levels.
Request for a quoteH2 CORE SYSTEMS GMBH
Germany
The Dryer is a hybrid temperature/pressure swing adsorption system which is easily to integrate in one of our H2 Core HydroCab or Cluster system. By using the dryer DRY 2.1, the hydrogen purity can even be increased to 99.999%.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
H2 CORE SYSTEMS GMBH
Germany
Enapter’s patented anion exchange membrane (AEM) electrolyser is a standardized, stackable and flexible system to produce onsite hydrogen. The modular design – paired with advanced software integration – allows set up in minutes and remote control and management. Stack this electrolyser to achieve the required hydrogen flowrate.,
Request for a quoteH2 CORE SYSTEMS GMBH
Germany
Enapter's AEM Multicore combines up to 420 modular AEM electrolysers and produces megawattscale green hydrogen.The production and supply of hydrogen is reliable, fast and costefficient.
Request for a quoteH2 CORE SYSTEMS GMBH
Germany
The HydroCluster is a plug and play solution for medium sized H2 demands. It is the solution to integrate Enapters and other 19” modules to a complete standalone system. Every Enapter Electrolyser is capable to produce up to 0.5 Nm³/h. The output volume of every electrolyser can be set between 60% and 100%. The HydroCluster combines up to 60 modules to a single plug and play system. Optional Dryer modules can increase the purity from 99.9% to 99.999%. The optional Water Purification System (WPS) can provide the needed water with the quality of < 20 µS/cm. For extreme temperature ranges heating and cooling systems can be added accordingly For detailed information and technical support. Contact us!
Request for a quoteH2 CORE SYSTEMS GMBH
Germany
The HydroCab PowerCore is the complete energy storage system combining benefits of hydrogen and battery systems. It is a short and longterm energy storage system. The modularity enables the design of the best system for your demands. The system is designed for an easy plug and play installation. The PowerCore can be delivered in a water cooled or air cooled version. Also ask us for outdoor or IP55 versions with an exhaust connection. Optional compressors and gas storage solutions complete the system. We also offer the installation and commissioning on site.
Request for a quoteH2 CORE SYSTEMS GMBH
Germany
The outdoor version of the H2 Core Hydro Cab is a plug and play solution for small and medium sized H2 demands. It is the solution to integrate Enapters and other 19” modules to a complete system. Every Enapter Electrolyser is capable to produce up to 0.5 Nm³/h. The output volume of every electrolyser can be set between 60% and 100%. The Hydrocab combines up to 4 modules to a single plug and play module. An optional Dryer module can increase the purity from 99.9% to 99.999%. The optional Water Purification System (WPS) can provide the needed water with the quality of < 20 µS/cm. A Water Tank Module can be installed and stores 38 l of deionized water. It is equipped with a pump which provides the needed supply pressure or the electrolyser modules. The WTM takes the space of one electrolyser and is needed when no direct water supply can be provided. Also it is recommended when more than one cabinet will be installed parallel.
Request for a quoteH2 CORE SYSTEMS GMBH
Germany
The H2 Core Indoor HydroCab is a plug and play solution for small and medium sized H2 demands. It is the solution to integrate Enapter and other 19” modules to a complete system. Every Enapter Electrolyser is capable to produce up to 0.5 Nm³/h of hydrogen. The output volume of every electrolyser can be set between 60% and 100%. The HydroCab combines up to 5 modules to a single plug and play module. An optional Dryer module can increase the purity from 99.9% to 99.999%. The optional Water Purification System (WPS) can provide the needed water with the quality of < 20 µS/cm. A Water Tank Module (WTM) can be installed and stores 38 l of deionized water. It is equipped with a pump which provides the needed supply pressure or the electrolyser modules. The WTM takes the space of one electrolyser and is needed when no direct water supply can be provided. Also it is recommended when more than one cabinet will be installed parallel.
Request for a quoteCTT TECHNOLOGY (UK) LIMITED
United Kingdom
Jazz2000Pro portable power station is a device designed to deliver superior power solutions, inherits the brand's consistent quality and craftsmanship. Known for its user-friendly interface and robust power output, this power station can easily meet diverse power needs, from laptops to CPAP machines. It is designed with all environmental conditions in mind, ensuring reliable power support for outdoor adventures, camping or emergencies. With a storage capacity of up to 1,920 watt-hours and an output capacity of 48 volts and 40 amps, the Jazz2000Pro guarantees long-term power needs. Its maximum output capacity is up to 2,000 watts, which is enough to support the operation of a variety of energy-intensive equipment. In addition, its lightweight design allows it to weigh only 20.5 kg, which is greatly easier to carry and deploy.
Request for a quoteResults for
Hydroelectric power stations - Import exportNumber of results
13 ProductsCountries
Company type