Hot water exchangers - Import export

What you can expect from APROVIS exhaust gas heat exchangers: - Efficient hot water generation in combined heat and power plants - Heating of thermal oil as an energy source - Individual solutions and compact designs - All the main components for the exhaust gas section and gas treatment are combined under one roof: proprietary products developed in-house - Cost-saving and reliable operation of the systems - Maximum functionality, safety and service - Temperature ranges: up to 600°C on the exhaust gas side or up to more than 1,000°C in the high-temperature range - Maximum functionality, safety and service - Temperature ranges: up to 600°C on the exhaust gas side or up to more than 1,000°C in the high-temperature range - Certifications: PED 2014/68/EU, ASME Code, EAC - Can be used in all plants with exhaust gases from hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels - Geared to international standards and directives

The air handling unit (AHU) is a small piece of equipment for the simple treatment of air in small environments. It is usually composed of a single chilled water and hot water heat exchange coil, both for cooling and heating, or of a direct expansion coil in which the refrigerant gas circulates. Evaporation takes place in the coil itself within the rooms of use by an air filter and a low head suction/delivery fan. For this sector, our company deals with the production and sale of copper and iron pipes which can be semi-finished or assembled suitable for different purposes, including: Air exchange, Air purification, Humidity control

A flue gas heat exchanger is part of the standard equipment for energy-optimised and environmentally friendly boiler operation. — Effective heat recovery and reduction of flue gas losses — Maximum efficiency gain when using condensing technology — Fuel savings of up to 7%, or up to 15% when using condensing technology — Intelligent control for a long service life and high level of efficiency — Compactly integrated into the boiler or as a stand-alone version for simple retrofitting

The Gronemeyer continuously operating spiral system cools, ferments or freezes general cargo and bulk goods. The products are transported on a plastic mat conveyor chain. The chain is wound around one or two rotating towers in a spiral. The design of the machine permits the handling of unpackaged food. The products' discharge temperature can be changed by adjusting the throughput time and/or the temperature in the module. In addition to heat or cooling treatment, differences in height up to 5 m can be overcome at the same time. Technical data: —Chain width: up to 1,400 mm —Usable chain length: up to 1,000 m —Temperature range: +1°C to +85°C —Insulating hood with access doors and inspection windows according to customer request —Cooling unit with direct evaporation or flow-through cooler with coolant (e.g., Sole) —Heat exchanger with hot water or steam connection

The Gronemeyer Heliflex continuously operating cooler cools, ferments or tempers general cargo. The products are transported on a plastic Heliflex chain. The chain is wound around two rotating towers in a spiral. The products' discharge temperature can be changed by adjusting the throughput time and/or the temperature in the module. Technical data: —Chain width: up to 400 mm —Usable chain length: up to 1,000 m —Temperature range: +1°C to +85°C —Insulating hood with access doors and inspection windows according to customer request —Cooling unit with direct evaporation or flow-through cooler with coolant (e.g., Sole) —Heat exchanger with hot water or steam connection

The Gronemeyer mat table cools, ferments or freezes general cargo and bulk goods. The products are transported on a plastic mat conveyor chain. The design of the machine permits treating unpackaged food. The products' discharge temperature can be changed by adjusting the throughput time and/or the temperature in the module. The mat table is a cost-effective and space-saving solution for short throughput times. Technical data: —Chain width: up to 1,500 mm —Usable chain length: up to 10 m —Temperature range: +1°C to +85°C —Insulating hood with access doors and inspection windows according to customer request —Cooling unit with direct evaporation or flow-through cooler with coolant (e.g., Sole) —Heat exchanger with hot water or steam connection

The Advance EnergyManager is a tried and tested design with an internal heat exchanger and shunt pump arrangement resulting in delivery of hot water equivalent to the volume of the tank at 43ºC. It works on the thermal store principle of storing primary (central heating) water and delivering mains pressure hot water through a heat exchanger. The shunt pump is pre fitted and wired to activate when taps or showers are turned on. The EnergyManager comes as shown above with wiring centre for installers to complete the wiring for the rest of the system. Full instructions for wiring the total system are included. At 65ºC operation the EnergyManager is perfect for underfloor or low temperature radiator circuits and offers efficiencies due to the temperature being lower than most thermal stores. It delivers hot water equivalent to the capacity of the store.

Temperature exchange between a gas and a liquid In the case of air-water heat exchangers (also called gas-water heat exchangers), there is a temperature exchange between a gas (usually air) and a liquid. Finned heat exchangers can cover various areas of application: - heating and evaporating, - cooling and condensing as well as heat recovery. In this context, lamellar heat exchangers are also called air heaters or air coolers. Air-water heat exchangers are often also used as exhaust gas heat exchangers or flue gas heat exchangers in order to recover the energy from warm or hot exhaust gases. Lamella packs for a large exchange area In order to achieve the largest possible exchange surface between the air and the medium (liquid) within the heat exchanger, lamellas or lamella packs are attached to the pipe system.

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

Customized air-water heat exchangers for industrial use Three types of air-water heat exchangers Three different designs o air-water heat exchangers The Anthermo GmbH delivers three different designs of air-water heat exchangers: Finned tube heat exchangers Lamella heat exchangers Straight tube heat exchangers These heat exchangers are designed in a way, that inside the tube water or another liquid circulates. The air flows around outside the tubes or the fins/lamellas. The connection between the fins and the tube is used to enlarge the space for heat transfer between the liquid and the gas fluid. The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-water heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

The UT-H is suitable for processes in high temperature and pressure ranges. The boiler can also convert to climate-neutral fuels which makes it a future-proof solution. — High-pressure hot water boiler from 820 to 18,300 kW with very high efficiency levels — Versatile operation for the manufacturing industry and district heating grids with temperature levels up to 225 °C — Customer-specific design and future-proof technology — User-specific control which offers integration of other control systems and remote monitoring — Custom designs for heat recovery boilers — Proven and reliable construction Made in Germany

The various output sizes and temperature ranges up to 190 °C of the UT-M enable flexible operation for countless process heat and heating applications. — Efficient heat and process heat for low running costs and emissions — Compact design for easy positioning and quick heating — Flexible use for industrial, commercial and district heating applications with temperatures up to 190 °C — Project-specific control solutions and optional real-time monitoring — Complete system from a single source, low-emission or CO2-neutral customer-specific operation possible — Proven and maintenance-friendly construction for a long service life and reliability — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels

Two independent firing units and flue gas paths create a double control range for individual heat consumption. — Very high efficiency across all power ranges — Particularly suitable for highly fluctuating heat and process heat demand — Reliable solutions for heating plants and the manufacturing industry with temperature levels up to 225 °C — Heat supply for the future: Low-NOx or CO2-neutral operation possible — Complete system with intelligent control technology and protected remote connection — Proven and durable boiler technology Made in Germany

Rollbond exchanger evaporator for cooling or heating

GLASSLINED HOT WATER STORAGE / HEATER TANK WITH ONE COIL. PRODUCED UP TO 5000 LTRS CAPACITY

hot water storage tanks meet domestic hot water needs of conscious users of 2000s through their improved technology and perfect design. A product resulted from an experience of more then half century in industry and advanced technology... It satisfies comfort, safety and economy simultaneously. Offers the most perfect selection range for villas, apartments, hospitals, hotels and business places through 100-6.000 liter volume easy to use and installation.

vacum tubes manifold collector systems