Hot water air heater - Import export

Electric heaters for any type of premises RP PROFESSIONAL electric heaters or heaters are robust and with the best components to obtain a fast, efficient and durable electric heating system. All models include, as standard, an ambient thermostat to start and stop the equipment once the desired temperature has been reached in the room and in this way optimize energy consumption. The 30 kW model can be applied to an external room thermostat with 10m of cable in case you want to control the room temperature at a point away from the equipment. Constructive details - Armored electrical resistance AISI 321 of high thermal exchange - Built-in room thermostat - Power selector - 1.5m electrical connection cable - Manual reset safety thermostat - Front protection grid - Channel up to 6m (except RP 33 M model) - Possibility of stacking several teams

Domestic heating with hot air boiler with diesel operation Hot air boilers with diesel operation are a fast and efficient system for heating domestic and commercial premises. The equipment has a soundproofed interior of the diesel burner so that its operation is as quiet as possible. It also incorporates a 3-speed fan to adjust the air flow according to the heating needs of the room to be heated. For its operation, a fuel tank, a smoke outlet and a single-phase connection socket are required. The diffusion of the hot air can be direct or with a network of ducts to direct the hot air to the different rooms to be heated.

Portable diesel heaters for heating closed spaces The portable diesel hot air heaters with smoke outlet, are ideal for heating indoor spaces. The equipment is totally portable and incorporates a fuel tank to obtain a correct autonomy of operation. The equipment incorporates a burner that provides a flame inside the combustion chamber that travels inside to obtain the greatest heat exchange. A fan providing air inside the equipment and when passing through the hot zones increases its temperature and is driven inside the room to be heated. These equipments have flue gas outlet and are suitable for any type of premises. The equipment can be controlled with an ambient thermostat that is responsible for starting or stopping the equipment depending on the desired temperature.

Hot air heaters with gas operation from 23 to 34 kW The K gas hot air heaters are units that work completely autonomously, that is, they do not need heat dissipative elements, which reduces acquisition and installation costs. Its operation can be methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - Combustion efficiency greater than 90%.

Our modules to increase the air temperature incorporate a combustion chamber and heat exchanger with high thermal performance, it has an insulated exterior paneling and a temperature control panel to order the start and stop of the burner and the fan. Our modules to increase the temperature are designed to be applied in drying process facilities where it is required to increase the temperature of the air driven by an external air fan. Depending on the air flow, the thermal increase can range from 20ºC to 60ºC. The air flow treated by the equipment can range from 2,150 m3/h to 18,000 m3/h depending on the selected model. The fuel used by the burner can be diesel, natural gas or propane gas.

Industrial warm air heater with diesel or gas operation from 26 to 500 kW The MM hot air generators are indirect heating type equipment (the hot air does not mix with the combustion gases) and they work completely autonomously. They do not need additional elements for heat dissipation, a fact that reduces acquisition, installation and maintenance costs. Its operation is based on the heating of a certain air flow, through the combustion of diesel, natural gas or propane gas. Said flow is aspirated and driven by the fans that the equipment incorporates and that comply with the ERP 2020 regulations. The main advantages over other heating systems are: - Reduction of acquisition and installation costs - Very fast heating system - Air diffusion can be direct or a duct network can be applied - 90% combustion efficiency

The ECO POL industrial wood stoves are designed for fast and efficient heating of all types of industrial, agricultural and livestock premises. The equipment incorporates a large combustion home where firewood or woody waste is introduced, once the combustion is carried out, the gases come into contact with a heat exchanger where heat transfer occurs with the air driven by a fan. The hot air is diffused in the room to be heated, obtaining a very fast and efficient heating system. With our industrial wood stoves, you will obtain a fast and efficient heating system, taking advantage of the woody waste produced in the manufacturing tasks (wooden pallets, wooden boxes, cardboard boxes, etc.). We have two models that provide a heat output of 50 and 100 kW that allow heating of 300 to 600 m2.

• OMNIA siltumsūkņu sērija atbilst apkures, dzesēšanas un karstā ūdens ražošanas prasībām maziem un vidējiem dzīvojamiem un komerciāliem uzņēmumiem. • Tas sastāv no dažādu tilpumu ārēja invertora bloka, kas savienots ar iekšēju hidraulisko bloku, kas tiek piedāvāts divās versijās ar vai bez trīspakāpju elektriskās integrācijas ar 3 kW (1,5 + 1,5), un abi šie modeļi parasti ir aprīkoti ar integrētu trīsceļu vārstu karstā ūdens ražošanai. ūdens caur ārēju katlu. • Sistēma ir ļoti universāla un var darboties ārējā gaisa temperatūrā līdz -20 °C un saražot karsto ūdeni līdz 60 °C, izmantojot elektrisko integrāciju. • Īpaši piemērots lietošanai radiācijās sistēmās, fankojās, radiatoros un karstā ūdens ražošanai (GBS) caur ārējo boileru (netiek piegādāts). • Sadalīts hologēna kontūrs, lai izvairītos no sasalšanas riska, īpaši cietajiem ārējiem lietojumiem. • Lietotāja interfeiss sastāv no tālvadības pulta (maksimums 50 m no iekšējā bloka), kas aprīkots ar lielu displeju un vienkārši iestatīša

hot water storage tanks meet domestic hot water needs of conscious users of 2000s through their improved technology and perfect design. A product resulted from an experience of more then half century in industry and advanced technology... It satisfies comfort, safety and economy simultaneously. Offers the most perfect selection range for villas, apartments, hospitals, hotels and business places through 100-6.000 liter volume easy to use and installation.

High efficiency, Homogeneously heat distribution in a short time, Ease to assemble and execute, Economic, Investment and operating costs are lower than, Long life, Electronic ignition system heating system with boiler and tubing system With the low or high step burning system, the desired temperature comfort can be provided easily according to the temperature of the air. Built-in remote control for convenient and easy operation. Technical Features Model Sirokko 20 Sirokko 30 Sirokko 40 Unit 1st-2nd Step 1st-2nd Step 1st-2nd Step Nominal Thermal Power (kW) 10,4 - 17,3 16,4 - 27,2 22,1 - 36,7 Natural gas Consumption (Nm3/sa) 1,1 - 1,81 1,7 - 2,84 2,3 - 3,83 Heating Area (m2) 60 - 120 80 - 150 150 - 225

Hermetic Natural Gas Stove It is compatible with all residences. (Domestic and Industrial) It provides the desired temperature comfort by automatically adjusting the low or high stage according to the ambient temperature. It warms up your spaces with its technology and adds harmony and elegance to your spaces with its eye-catching design. High efficiency, Ease to assemble and execute, Long life, Electronic ignition system, Homogeneously heat distribution in a short time, Economic, Investment and operating costs are lower than heating system with boiler and tubing system TECHNICAL FEATURES Unit Min. Max. Nominal Thermal Power (kW) 3 6 Natural Gas Consumption (Nm3/sa) 0,28 0,56 Area to Heat (m2) 25 60

Powrmatic CPx 360kW Gas Fired Cabinet. Upright. Horizontal and External Cabinet Heaters also available

GLASSLINED HOT WATER STORAGE / HEATER TANK WITH ONE COIL. PRODUCED UP TO 5000 LTRS CAPACITY

The HETAS listed SFUTS pre plumbed pre wired Universal Thermal Store has been designed to link a number of heat sources including gas or oil boilers, wood burners, and solar thermal or PV as well as electric and other inputs. Hot water is safely delivered at mains pressure through a large integral coil for fast bath filling and power showering without a pump. In summer the solar coil, if utilised, will provide most of your hot water needs. In the winter the wood burner, when lit, will handle most of the heating and hot water duties. Central heating is taken from the store which acts as a buffer for fast radiator or under floor heat up. The store is kept hot by the energy inputs controlled by thermostats. Because the unit is a sealed system it is fine for under floor systems. The primaries are 28mm and can be teed off for two separate circuits if required.

The Advance Solar EnergyManager is a tried and tested thermal store design with an internal heat exchanger and shunt pump arrangement resulting in delivery of hot water equivalent to the volume of the tank at 43ºC. The solar version has a dedicated solar coil which reduces energy bills and reliance on fossil fuel. The solar thermal panels will contribute to heating and hot water during periods of solar gain. The shunt pump is pre fitted and wired to activate when taps or showers are turned on. The EnergyManager comes as shown above with wiring centre for installers to complete the wiring for the rest of the system. Full instructions for wiring the total system are included. At 65ºC operation the EnergyManager is perfect for underfloor or low temperature radiator circuits and offers efficiencies due to the temperature being lower than most thermal stores. As a thermal store it can reduce boiler cycling and act as a buffer for heating.

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house. The indirect pattern cylinder (TSiC) without the integrated feed and expansion tank has to be fed with a remote F and E tank but can be sited anywhere in the property. They have two coils, the lower one for heat input from a boiler, the higher one for mains fed hot water services. They can be used with sealed system boilers and heating circuits on Y plan systems. These low maintenance pre plumbed units provide flow rates up to 30 litres per minute and if linked to the appropriate gas, oil, or LPG boiler are suitable for average to larger properties. The bottom coil must be pumped. The units look smart too, with a wipe-clean white appliance finish, and the insulation is 60mm foam injected for maximum efficiencies. Stainless steel construction offers a lightweight long life product. The stores are guaranteed for ten years, the parts for two.

A new cylinder style thermal store with a separate cold section - it can be installed without a discharge if preferred. The store is open vented at atmospheric pressure. The mains hot water delivery is suitable for one bath plus one shower on an overnight (off peak) charge. Perfect for modern apartments or the all electric home, this hot water thermal store system gives you the benefits of mains pressure hot water. Designed with modern lifestyles in mind, installation is simple, maintenance is low and the unit is compact. The unit is fitted with a hot water control pack and two 3kw immersion heaters. The ETS 160 should be connected to low tariff supply and used during appropriate periods for maximum efficiency. The thermal store is made from stainless steel for long life and has been upgraded to 60mm insulation thickness to exceed Part L of the Building Regulations. The store is guaranteed for 10 years. The fitted components are guaranteed for 2 years.

The Advance EnergyManager is a tried and tested design with an internal heat exchanger and shunt pump arrangement resulting in delivery of hot water equivalent to the volume of the tank at 43ºC. It works on the thermal store principle of storing primary (central heating) water and delivering mains pressure hot water through a heat exchanger. The shunt pump is pre fitted and wired to activate when taps or showers are turned on. The EnergyManager comes as shown above with wiring centre for installers to complete the wiring for the rest of the system. Full instructions for wiring the total system are included. At 65ºC operation the EnergyManager is perfect for underfloor or low temperature radiator circuits and offers efficiencies due to the temperature being lower than most thermal stores. It delivers hot water equivalent to the capacity of the store.

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house. They work on the thermal store principle of storing central heating water and providing mains fed hot water via a powerful coil for power showering and quick bath filling. The coil is not pumped. The thermal store acts as a buffer for fast radiator heat up and boiler efficiency. The direct pattern cylinder (TSDC) without the integrated feed and expansion tank has to be fed with a remote F and E tank sited above the highest point of the radiator circuit. You need two pumps - one for the boiler to keep the store hot - controlled by the thermostat on the store, and one for the heating circuit - controlled by the room thermostat and heating programmer. These low maintenance pre plumbed units provide flow rates up to 30 litres per minute and if linked to the appropriate gas, oil, solid fuel or biomass(except Heat Pumps) are suitable for average to larger properties

Incredible efficiency and savings. Installing a domestic hot water heat pump has the highest savings and fastest return than any energy upgrade available to home/building owners. For every 1kWh of energy consumed the heat pump can produce up to 5kWh of thermal energy. Our heat pumps typically pay for themselves within 3.5 years or even less if you receive government subsidies or a grant for the system. This outstanding financial performance is due to our unique heaterless design. Most heat pumps on the market rely on an additional electric heater to cope with daily demands, increasing their real power consumption. All our products have a unique heaterless design which produces the same hot water temperatures (up to 62˚C) but without a power consuming electric heater. This efficiency results in significant savings over time. Benefits: - Incredible efficiency and savings - Free ventilation & cooling - Optimized performance - Reliable and durable - Long lasting and easy to maintain

They are the most economical and correct solution hot air generators for large volume spaces where ambient air should be heated. High efficiency, Homogeneously heat distribution in a short time, Ease to assemble and execute, Economic, Long life, Investment and operating costs are lower than, Electronic ignition system heating system with boiler and tubing system Technical Features Model Sirokko 50 Sirokko 60 Sirokko 70 Nominal Thermal Power (kW) 47,5 57 66,5 Natural gas Consumption (Nm3/sa) 5 5 7,5 Heating Area (m2) 200-400 250-500 325-650