Hot roller - Import export

Cold and hot drawing rolling mills, ring, roller, roller, disk or forming roller ring etc., called profile, wire, cable, electrode, iron, copper etc. The processing, manufacturing or, if desired, the correction of the rolling mills used in the drawing of materials such as profile, wire, cable, electrode, iron, copper etc. By performing highly precise cnc machining, both the quality of the product to be obtained is increased and the optimum benefit is provided to the customer by extending the life of the rolling mills used. By correcting the rolling mill tool, the customer's remanufacturing costs are reduced and the service life of the rolling mill tools is increased. Now these roller rings are processed and manufactured in the same quality in Turkey.

Heat-sealing roller FP802/803 with constant heat which allows the sealing of bags and heat-sealable materials. This roller allows you to make seals with different shapes (square, circular, etc.) according to your needs. Once the roller has been switched on, the operator must wait for the roller to warm up for about 10 minutes. The temperature is adjustable via a potentiometer and reaches a maximum of 200 ° C. There is no graduated scale. The temperature must therefore be set following practical tests on the material. The use is manual. The pressure, the sealing time and the temperature must be managed by the operator. The sealing result depends exclusively on its ability and therefore the result can vary between seals. The coating of the anti-adhesive Teflon roller allows to seal bags in polypropylene, polyethylene and laminated materials. It is supplied complete with a mat in silicone material which, positioned under the product to be sealed, is the ideal match for sealing.

We manufacture rough or fully machined pot roller for hot dip zinc and stablibilizing roller in stainless steel

Spiked rollers for hot perforation can be made of different materials depending on the working temperature. Please contact us for your application!

Fluoroplastic roll covers eliminate sticky build-up problems with metal and rubber rollers used in hot or cold applications. We offer heat shrinkable FEP and PFA roll covers in 0.5mm thickness, and standard and custom sizes. Our non-stick roller coatings are available for self-application using a simple hot air gun. Alternatively, we can fit the roll covers in our works or at your premises. For more information, visit the adtech.co.uk website or contact us: t: +44 (0)1285 762000 e: sales@adtech.co.uk

- Standard perforation devices as module system at reasonable prices with manual or automatic roller adjustment - Perforating devices adapted to your machine and its special conditions - Perforation systems with driven rollers - Hot perforating systems for foils and nonwovens.

For the bonding of thermoplastic textiles, the Triad Wedge Welding System is ideal for your in house fabrication needs to produce tents, tarps, awnings, flags, banners, liners, covers, curtains, bags, tubes, etc. The Triad can weld PVC, PE, PP, Urethane and many other weldable, flexible membranes. It can also weld supported and non supported material in thickness of 5 to 100 oz. and is designed to be portable, versatile and user friendly. HOW DOES IT WORK? The welding of various thermoplastics occurs by a combination of wedge temperature, material speed passing over the wedge, and pressure of the pinch rollers. The material is placed between the pinch rollers and the hot wedge is inserted. Contact is made between the top and bottom of the material and a melting of the coating occurs with a certain speed of the material crossing the hot wedge surface. The pinch rollers then apply pressure to the melted coating to create the lasting bond.

For the bonding of thermoplastic textiles, the Triad Wedge Welding System is ideal for your in house fabrication needs to produce tents, tarps, awnings, flags, banners, liners, covers, curtains, bags, tubes, etc. The Triad can weld PVC, PE, PP, Urethane and many other weldable, flexible membranes. It can also weld supported and non supported material in thickness of 5 to 100 oz. and is designed to be portable, versatile and user friendly. HOW DOES IT WORK The welding of various thermoplastics occurs by a combination of wedge temperature, material speed passing over the wedge, and pressure of the pinch rollers. The material is placed between the pinch rollers and the hot wedge is inserted. Contact is made between the top and bottom of the material and a melting of the coating occurs with a certain speed of the material crossing the hot wedge surface. The pinch rollers then apply pressure to the melted coating to create the lasting bond.

By far the most glass we know is so-called float glass. It’s transparent, perfectly flat and available in various thicknesses, hardness’ and finishes. Colored glass is also available, this is obtained by the addition of metals. Figure glass gets a machined surface by allowing it to pass through specific rolls after the oven. After cooling the pattern remains visible. With wire glass, the metal grid is pressed into the hot glass by a roller. Opaline glass is clear glass with a thin layer of milk glass on it. Anti-reflective glass undergoes treatment during the casting process, which negates the reflective effect of the glass. Laser machine The best machine to process glass or mirrors is our BRM CO2-laser. Each type of material reacts differently to the impact of the laser beam, so there are hardly any regular guidelines for laser cutting or engraving with a laser machine, but the settings

For the bonding of thermoplastic textiles, the Triad Wedge Welding System is ideal for your in house fabrication needs to produce tents, tarps, awnings, flags, banners, liners, covers, curtains, bags, tubes, etc. The Triad can weld PVC, PE, PP, Urethane and many other weldable, flexible membranes. It can also weld supported and non supported material in thickness of 5 to 100 oz. and is designed to be portable, versatile and user friendly. HOW DOES IT WORK? The welding of various thermoplastics occurs by a combination of wedge temperature, material speed passing over the wedge, and pressure of the pinch rollers. The material is placed between the pinch rollers and the hot wedge is inserted. Contact is made between the top and bottom of the material and a melting of the coating occurs with a certain speed of the material crossing the hot wedge surface. The pinch rollers then apply pressure to the melted coating to create the lasting bond.

The secondary heating system is an integral part of the ContiRoll® and one of the decisive factors for its optimal functioning. For a perfectly dimensioned secondary heating system signicantly contributes to its eciency. The oil is heated in the boiler house to the temperature required and delivered to the primary circuit. The secondary heating station maintains the temperature in the secondary circuit to the press at set temperature by mixing the oil returning from the press that has already cooled down with the hotter oil of the primary circuit. The thermal oil transfers its thermal energy via hot platens, roller rods, steel belts to the mat to be pressed. Features Advancing temperature of the primary circuit is 280 °C Quick-acting aps for immediate re protection Heating circuits for setting the temperature distribution required by the respective process over the entire press length

AHN's comprehensive Benchtop Equipment range includes a variety of centrifuges, such as small benchtop, universal, clinical, hematocrit, and refrigerated options, multiple vortex mixer options, rollers and rotators, and magnetic stirrers with and without heating. This range offers impressive user-friendly and safety features, making it easy and safe to use. Every instrument is extremely robust, designed for extended runs, and operates quietly. They also have a small footprint, taking up minimal benchtop space. Safety features include an electronic safety brake system to prevent the lid from opening during operation and suction pads for stable operation. The instruments are equipped with brushless DC motors that require no maintenance, making them ideal for extended runs. The equipment is designed with the user experience in focus, featuring large displays and intuitive interfaces for increased comfort. The equipment comes with a two-year warranty.