Hot plates - Import export

Hot Plate for built-in. For flush fitting. Design: CNS 18/10. With loosely attached thermostat, with built-in casing. Continuously adjustable temperature control from 30-100°C. Thickness of plate 2 mm, setback 15 mm all around.

Design: Casing chrome nickel steel 18/10. Continuously adjustable temperature control from 30 – 90 °C by loosely attached ther mostat, with casing. 2 x GN 1/1 and 3 x GN 1/1 seperately adjustable.

Basically the TOOLMASTER versions vary by their tool design, their size of useable surface and the degree of automation. All versions are suitable for high temperatures and optionally equipped with fire protection engineering, which quickly separates the tool in case of energy drop or timeout. KLN also manufactures special machines adapted to your individual requirements. TOOLMASTER "Basic" as well as type HE 50/30 are standard machines. The versions "Advance", "Semi-Automatic" and "Automatic" are made with tools in sandwich design. This makes possible the handling of upper tool, hot plate element and lower tool as a compact unit. They are designed particularly for quick and frequent production changes. The HE/SA has a horizontal concept with servo-drive technology for quick and precise movements. The TOOLMASTER CC has been developed for applications with two welding tasks in one cycle. Almost all machine versions can be provided with pneumatic or servo-motor drives.

Hot pressed aluminum nitride (AlN) is used in applications requiring high electrical resistivity in additional to exceptional thermal conductivity. The applications for hot pressed AlN typically involve rigorous or abrasive environments and high-temperature thermal cycling.

Design: CNS 18/10. Continuously adjustable digital temperature control from 30 - 150 °C.

For flush fitting. Design: CNS 18/10. With loosely attached thermostat, with built-in casing. Continuously adjustable digital temperature control from 30-150°C. Thickness of plate 2 mm, setback 15 mm all around.

Hot or cold combiplate, GN 1/1 - GN 3/1. For flush built-in, facing made of chrome nickel steel. Digitally adjustable from - 5°C to + 140°C. Ready to plug-in. Refrigerant R600a.

Advantages of Heating Plates with Square Cartridge Heaters: -> Simple plate manufacture due to rectangular groove geometry, no deep-hole boring -> Simple heater installation by bending and pressing along the plate surface -> Complex plate geometries with bores and openings -> Optimal heat transfer due to 75% surface contact -> No casting with heat conductive compound -> Uniform temperature profiles due to thermally optimized groove layouts/power distribution and utilization of insulation plates -> high process temperatures (up to 450°C in aluminium, up to 700°C in stainless steel) Example "Heated Stamp": D=100 mm out of tempered tool steel up to max. 700°C continuous temperature. Fitted with 2 Square Cartridge Heaters 1500 W/ 230 V, 4,5 x 4,5 mm x 600 mm, with 50 mm unheated at the termination end. Annealed and formable with a nickel sheath, resistant up to 850°C surface temperature. Connection by fibreglass insulated pure nickel high-temperature leads (max. 500°C)

Stainless steel, with folding door/s, 1 adjustable intermediate shelf. Digital adjustable from 30 – 85 °C.

Design: Chrome nickel steel 18/10. Continuously adjustable temperature control from 30 – 100 °C by loosely attached thermostat, with control lamp and casing. E.-Connection: 230 V – 0,5 to 2,0 kW, ready to plug in. Thickness of plate 2 mm, setback 15 mm all around, mounting height: 115 mm. Cut-out dimensions: Length minus 25 mm, Depth minus 25 mm.

Design: Chrome nickel steel 18/10. With on-off switch and control lamp. E-Connection: 26046: 230 V – 0,6 kW. Thermostat fixed at max. 80 °C. 26053: 230 V – 0,5 kW. Continuously adjustable temperature control by thermostat.

DD11 - DD13, pickled - greased, EN 10029 S235JRG2, pickled - greased, EN 10025 S355MC, pickled - greased corrugated plates, S235 JRG2 bulb plates, S235 JRG2

INFRARED HEATING PANEL TIH 700 SFlexibly usable flat heating panel for wall drying, effective spot heating or as a decorative heating element We strongly recommend using the infrared heating panel TIH 700 S when conventional air heaters have reached their limits for process-related reasons, when rooms without a heating are to be equipped with an effective heat source without costly modifications, or when you want to provide additional cosy warmth in your own four walls in a targeted and cost-effective manner. For while classical heating devices work with convection heat, which means that they use the ambient air as heat transfer medium, heat it up and distribute it in the room, the heating panel TIH 700 S generates direct heat by means of infrared radiation without convective loss and thus works on the same principle as the sun. This functional principle provides manifold possibilities of use for the infrared heating panel TIH 700 S:

Efficient heating procedure with environmentally friendly IR-C radiationBranded heating panel of the size 605 x 505 mm with a power of 300 W The elegant infrared flat heating panel TIH 300 S generates a cosy and clean warmth – without noises, smells, condensate or the unpleasant circulation of dust. Like the sun the branded heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room.

The infrared heating panel TIH 900 S supplied in TÜV-tested quality comes with all the references to be expected of a branded heating panel. This includes i.a. the efficient heating procedure with environmentally sound IR-C radiation, where 100 % of the electrical energy input is converted into heat output. Moreover, the TIH 900 S generates a cosy and clean warmth – without noises, smells, condensate or the unpleasant circulation of dust. For like the sun the heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room.

INFRARED HEATING PANEL TIH 500 SFlexibly usable flat heating panel for wall drying, effective spot heating or as a decorative heating element We strongly recommend using the infrared heating panel TIH 500 S when conventional air heaters have reached their limits for process-related reasons, when rooms without a heating are to be equipped with an effective heat source without costly modifications, or when you want to provide additional cosy warmth in your own four walls in a targeted and cost-effective manner. For while classical heating devices work with convection heat, which means that they use the ambient air as heat transfer medium, heat it up and distribute it in the room, the heating panel TIH 500 S generates direct heat by means of infrared radiation without convective loss and thus works on the same principle as the sun. This functional principle provides manifold possibilities of use for the infrared heating panel TIH 500 S:

Unfailingly the flexible and effective infrared heating panel TIH 400 S impresses with cosy warmth in every conceivable application scenario. Whether it is intended to be used for additional selective heating in the living area, as sole heat source in rooms so far without a heating system such as the hobby room in the basement, or for commercial use, e.g. in the catering trade, at cool workplaces in the storage room or even in the area of construction drying and renovation. For its heating operation the versatile flat heating panel requires nothing more than a power outlet, it is perfectly easy to handle and supplies clean heat – without noises, smells, condensate or the unpleasant circulation of dust. For like the sun the TIH 400 S heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room

S235 JRG2 S355 J2G3 sheet plates S355MC

Square cartridge heaters are used where much power has to be installed near the surface of a tool, e.g. in cutting knives, sealing stations or hot plates. With a soft, malleable condition in stainless steel or nickel sheath square cartridge heaters can easily be pressed into common milled rectangular grooves. Apart from the advantageous heat transfer over ¾ of the sheath, it is not necessary to cement or cast in the heater which is imperative for round cartridge heaters. Unlike tubular heaters which are also available in square sections (see chapter Flexible Heating Pipes), the square cartridge heaters have the termination on one side and can be loaded with 16W/cm² (2.5W/in²) due to their special inside construction.

Design CNS 18/10. With IRK-halogen infrared-quarz radiator. Substructure: hot plate with retaining lip, thermostatically adjustable from 30-100°C. With hygienic protection made of acrylic glass.

GUTBROD combination coatings offer a wide range of applications for various industrial requirements and applications such as: - rolls - container - hot plates - painting hangers - mirror jaws - moulds - screws - knives - slide rails - conveyor units - industrial baking tins and trays - contact pressure, control and guide rollers - welding railss

Simple, professional, bench thermosealers, suitable for closing food trays. The FP-TM thermosealers are equipped with a hot plate that, manually lowered by the operator, allows the plastic film to be sealed onto the plastic trays, sealing and protecting the contents. The FP-TM thermosealers are equipped with a temperature selector that makes them easy to use on any type and thickness of film/trays. Depending on the machine and mold purchased, it is possible to heat up a trays or two trays simultaneously. For each type of tray you must use the relative mold.

Color: Silver Surface treatment: Hot Dip Galvanized/ Zinc Plated Application: Lifting Fittings

Color: Sliver Surface treatment: Hot Dip Galvanized/ Zinc Plated Application: Lifting Fittings

Ceramic Insulated (Band) Heaters are predestined for high-temperature applications beyond 450 °C, for example for pipe heating in process heat technology, especially when gases are involved. Ceramic insulated sectional surface heating elements are also brought into action where a heat storage capacity is needed, as in hot plates the case. With the heating surface of ceramic flat heaters being composed by small-limbed ceramic elements with aligned holes in the centre for the resistance coils to be fed through, ceramic sectional heating mats are also applicable for bent or cylindric surfaces. Like Micanite insulated flat heating elements also Ceramic insulated elements can receive a metal sheath. The latter provides additional protection against mechanical load and allows for attaching connection boxes. Another advantage is the easy installation by means of mounting holes in the metal cladding.

Our premiumgrade silicone trivets boasts a nonslip honeycomb design to give you better control over pots, pans, dishes, or handles and to make it easier to open jars, hold spoons, or protect surfaces. Our trivets for table and dining room use are made with a foodgrade safe, nontoxic, BPAfree, heat resistant silicone mats that can be use as pot mats, pot pads, hot pads, dish mat and hot pot holders. They have slipresistant surface and surface protection. They are heat resistant up to 255°C, so you can put down messy serving spoons, water pitchers, or hot plates or pots without causing damage.

Our premiumgrade silicone trivets boasts a nonslip honeycomb design to give you better control over pots, pans, dishes, or handles and to make it easier to open jars, hold spoons, or protect surfaces. Our trivets for table and dining room use are made with a foodgrade safe, nontoxic, BPAfree, heat resistant silicone mats that can be use as pot mats, pot pads, hot pads, dish mat and hot pot holders. They have slipresistant surface and surface protection. They are heat resistant up to 255°C, so you can put down messy serving spoons, water pitchers, or hot plates or pots without causing damage.

Cooking is your passion and sometimes you lack additional space to prepare meals? Or maybe you travel often and want to be able to cook wherever you are? The Zepter compact induction cooker is the solution for you. It is versatile (8 temperature levels from 60 ° C to 240 ° C and 8 heating power levels from 100 W to 2000 W) and convenient to use - a touch screen with a clear display helps in this. The timer and Hot Plate indicator make cooking even easier. Made of high-quality Schott Ceran glass, the surface is easy to clean. The device is also equipped with a parental lock. Presentation ADVANTAGES OF THE PRODUCT LIGHT, PORTABLE, SAFE, DECORATIVE: COMPLETE YOUR DINING TABLE WITH THIS USEFUL APPLIANCE. It keeps the food warm and looks good on the table. Dazzle your guests with the most modern technology! Rapid heating The heat is generated directly inside the pot. The induction method is fast and efficient.

Laboratory board for Arduino applications Epoxy glass hard fabric FR4 1.50 mm Two-sided 35 µm Cu Plated-through (PTH) Hot tinned (HAL lead free) Hole matrix field in 2.54er raster Bored Ø 1.10 mm Soldering islands 2.20 x 2.20 mm 4 Potential paths Placement print for the following components: 8-bit AVR micro controller ATmega328P Serial connection USB connection Size 100.00 x 160.00 mm