Hot air - Import export

Heating of greenhouses and large areas with diesel or gas hot air generators The hot air generators for greenhouses of the AM series are equipment that works completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its operation can be diesel, methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - 90% combustion efficiency.

The HG 50 is a versatile high-speed banner finishing machine engineered for welding, cutting, and grommeting operations all within a single station. Designed for a one-person operation, it eliminates multiple processes and minimizes material handling. This integration results in a significant increase in usable floor space and streamlines operations, optimizing both efficiency and productivity for businesses.

Hot air blower with ergonomic handle and adjustable temperature. Suitable for shrinking, drying, heating, activating, welding and bending plastic materials for various applications indoors or out. The temperature is electronically adjustable from 20 to 650°C. CE certified. Equipped with a metal carrying case.

Specifications Power: 1200W Voltage: 220V 50/60HZ Temperature Range: 100℃-500℃ Air flow Range: 6-200 Maximum air flow: 200L/minute Dimensions(L*D*H): 188(L)*245(D) *135(H)mm Weight: 3.65kg Zero Cycle Count, so you have the maximum amount of cycles remaining. Lithium-Ion Polymer technological materials Strict QC test Less than 1% failure rate 12 Yes Garanti

Outdoor hot air generator for the heating of tents, covered swimming pools, etc. POOL MANN hot air generators are a perfect solution for the heating of closed premises where a heating system is required where the heat generating equipment must be located outside the room to be heated. Its operation can be diesel, methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - 90% combustion efficiency.

Industrial warm air heater with diesel or gas operation from 26 to 500 kW The MM hot air generators are indirect heating type equipment (the hot air does not mix with the combustion gases) and they work completely autonomously. They do not need additional elements for heat dissipation, a fact that reduces acquisition, installation and maintenance costs. Its operation is based on the heating of a certain air flow, through the combustion of diesel, natural gas or propane gas. Said flow is aspirated and driven by the fans that the equipment incorporates and that comply with the ERP 2020 regulations. The main advantages over other heating systems are: - Reduction of acquisition and installation costs - Very fast heating system - Air diffusion can be direct or a duct network can be applied - 90% combustion efficiency

Drying processes with hot air generators fully configurable in flow and air pressure AGM hot air generators are units that work completely autonomously, they do not need heat dissipative elements, which reduces acquisition and installation costs. They can run on diesel, natural gas or propane gas and their function is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated or dried. Its design allows the application of all types of low, medium or high pressure fans according to the needs of each installation. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating or drying system. - Air diffusion can be direct or a network of ducts can be applied. - 90% combustion efficiency. - Possibility of supply with low, medium or high pressure fans.

Industrial wall mount heater with diesel operation The GS wall-mounted industrial heaters are units that operate completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its diesel operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air in adjoining areas where the equipment has been installed. - Efficiency of combustion of 92%.

Domestic and commercial heating with hot air boilers with natural gas or propane operation Our hot air boilers are ideal for domestic and commercial heating of premises from 370m3 to 840m3. Our hot air boilers can work with natural gas or propane gas and have a sealed combustion system, that is, the air used for combustion is from the outside and in this way the air from the room to be heated or from the air is not used. living place. Our hot air boilers can diffuse the hot air directly or a network of ducts can be applied to distribute the hot air in the different rooms of the house.

Domestic heating with hot air boiler with diesel operation Hot air boilers with diesel operation are a fast and efficient system for heating domestic and commercial premises. The equipment has a soundproofed interior of the diesel burner so that its operation is as quiet as possible. It also incorporates a 3-speed fan to adjust the air flow according to the heating needs of the room to be heated. For its operation, a fuel tank, a smoke outlet and a single-phase connection socket are required. The diffusion of the hot air can be direct or with a network of ducts to direct the hot air to the different rooms to be heated.

Hot air heaters with gas operation from 23 to 34 kW The K gas hot air heaters are units that work completely autonomously, that is, they do not need heat dissipative elements, which reduces acquisition and installation costs. Its operation can be methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - Combustion efficiency greater than 90%.

Efficient use of waste heat (up to 1.000 °C) In many production processes waste heat occurs in form of hot air which is put out to the environment without any use. Very often these hot gases are contaminated air. On the other side clean (cold) air must be warmed up for the production process. In these cases cross flow heat exchanger can reduce the energy costs. The hot air stream will be conducted in the cross or counter flow method over the cold air inside the cross flow heat exchanger. Though both air streams are strictly separated because of the construction of the heat exchanger and they don´t get mixed (leakage less than 0,5 %). Only the energy of the hot waste stream is transferred to the cold clean stream.

Because the units carry the label made in Germany you can be sure that you are buying a top-quality, highly efficient and extremely reliable heating unit which will carry on heating in the most hostile of environments and harshest of conditions. Theres also an electronically-controlled multistage switch to regulate air flow and air temperature so that you can carry out blasting, coating and painting work in fact almost any surface work at all - at a constant temperature both indoors and out. Here the low-down on the TEH 200: Heating performance: 40 kW Air flow rate: 3,000 m³/h Input voltage: 400 V Power consumption max.: 61 A Fuse protection / plug: 63 A / CEE 63 A, 5-pin Mobility: wheelable/ fork lift / crane Sound level (distance 3 m): 75 dB (A) Air pressure: 600 Pa Temperature increase ΔT: 60 °C Length: 1,625 mm Width: 800 mm Height: 1,270 mm Weight: 230 kg

Air flow routing tubes are designed to channel different kinds of air to appropriate destinations. If you have a specialized vehicle and need superior flexibility in your air duct tubing, these products lead the industry. CARADUCT® flexible tubes are multi-layer, grooved tubes that are wound from a combination of aluminum and paper layers. They possess a particularly high crushing strength and have very good insulation properties. Through high flexibility and small bending radii, they offer good space usage, particularly when laying out in corners. Dükerrohr is a twin flexible tube distinguished by a particularly high insulation effectiveness to reduce temperature drops in the warm air ducting. Since it is installed outside of the vehicle, it carries additional protection against water and oil splashes.

age unknown hand operated padding turntable for coldglue incl. mobile frame hot air dryer Delivery time: Shortly Ref: MU230075A Please ask for price. We ship and install worldwide!

A snack that no guest will despise. Share a slightly less healthy (but no less delicious!) version of almonds. Roasted with hot air, it remains juicy, and the salt enhances its taste.

A snack that no guest will despise. Share a slightly less healthy (but no less delicious!) version of almonds. Roasted with hot air, it remains juicy, and the salt enhances its taste.

Adaptacks basic board Epoxy fibre-glass FR4 1.50 mm Double sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) Size 100 x 200 mm

A snack that no guest will despise. Share a slightly less healthy (but no less delicious!) version of almonds. Roasted with hot air, it remains juicy, and the salt enhances its taste. Buy now roasted salted almonds

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 10 self-adhesive SO8-Adapters Pre-scratched rated break point for the separation of individual modules from the board Size 19.00 x 67.25 mm

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 5 self-adhesive SM16-Adapters Pre-scratched rated break point for the separation of individual modules from the board Size 28.00 x 150.00 mm

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 5 self-adhesive SM14-Adapters Pre-scratched rated break point for the separation of individual modules from the board Size 36.50 x 113.30 mm

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 5 self-adhesive SM8-Adapters Pre-scratched rated break point for the separation of individual modules from the board Size 34.70 x 88.00 mm

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 12 self-adhesive strips with rectangle pads in parallel order Pre-scratched rated break point for the separation of individual modules from the board Size 90 x 100 mm

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 14 self-adhesive strips with quadro-pads Pre-scratched rated break point for the separation of individual modules from the board Size 90 x 100 mm

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 17 self-adhesive strips with potential strips Pre-scratched rated break point for the separation of individual modules from the board Size 90 x 100 mm

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 12 self-adhesive strips with square-pads in parallel order Pre-scratched rated break point for the separation of individual modules from the board Size 90 x 100 mm

SMD-Labcard Epoxy fibre-glass 1.50 mm Single-sided 35 µm Cu Hot air leveling (HAL-Leadfree) 27 x 27 soldering pads 1.00 x 1.00 mm Hole spacing 1,27 x 1,27 mm Hole diameter 0.45 mm Size 39.37 x 38.10 mm

SMD-Labcard Epoxy fibre-glass 1.50 mm Single-sided 35 µm Cu Hot air leveling (HAL-Leadfree) 75 x 75 soldering pads 1.00 x 1.00 mm Hole spacing 1,27 x 1,27 mm Hole diameter 0.45 mm Size 99.06 x 99.69 mm