Voltage - Import export

The NCP565D2T12G is a 1.2V, 1.5A linear voltage regulator from ON Semiconductor. It is a low-dropout (LDO) regulator with a wide input voltage range of 2.7V to 18V. It features a low quiescent current of only 10μA and a fast transient response. The device is available in a D2PAK package and is ideal for applications requiring low power consumption and high accuracy.

The LE50CD linear voltage regulator from STMicroelectronics is a positive fixed voltage regulator with a single regulator, an output voltage of 5V, and a typical voltage dropout of 0.2V@100mA. It is designed for surface-mount applications and comes in an 8-SOIC package with a width of 0.154" (3.90mm). The current output is rated for a minimum of 150mA, and it is capable of operating in temperatures from -40°C to 125°C.

The MIC2954 is a “bulletproof” efficient voltage regulator with very low dropout voltage (typically 40mV @ light loads and 375mV @ 250mA), and low quiescent current (120µA typical). The quiescent current of the MIC2954 increases only slightly in dropout, thus prolonging battery life. Key MIC2954 features include protection against reversed battery, fold-back current limiting, and automotive load dump protection (60V positive transient). Features • High-accuracy 5V, guaranteed 250mA output • Low quiescent current • Low dropout voltage • Extremely tight load and line regulation • Very low temperature coefficient • Current and thermal limiting • Input can withstand –20V reverse battery and+60V positive transients • Error flag warns of low output voltage • Logic-controlled electronic shutdown • Output programmable from 1.24V to 29V (MIC2954-07/08) • Available in TO-220, TO-92, and surface-mount SOT- 223 and SOIC-8 packages

The FXMA2102UMX is an 8-channel, ultra-low power, voltage translator/buffer/repeater/isolator from ON Semiconductor. It is designed to provide a low-power, low-voltage solution for translating and buffering signals between two different voltage domains. It is ideal for applications such as automotive, industrial, and consumer electronics. Features: • 8-channel, ultra-low power, voltage translator/buffer/repeater/isolator • Low-power, low-voltage solution for translating and buffering signals between two different voltage domains • Supports up to 8V input voltage range • Low-power operation: <1µA typical • High-speed operation: up to 10MHz • High-impedance output: >1MΩ • High-impedance input: >1MΩ • High-voltage isolation: >2.5kV • ESD protection: >8kV Applications: • Automotive • Industrial • Consumer electronics • Battery-powered systems • Portable devices • Wearable devices • Medical devices

The LM393DR2G is an 8-pin SOIC general purpose comparator with a maximum operating temperature of +70°C. It has a quiescent current of 2.5mA and an input bias current of 250nA. Features:-General purpose comparator -8-pin SOIC package -Maximum operating temperature of +70°C -Quiescent current of 2.5mA -Input bias current of 250nA -Packaged in Digi-ReelR Alternate Packaging Applications: The LM393DR2G is suitable for a wide range of applications, including voltage monitoring, temperature sensing, and signal conditioning. It can also be used in motor control, power supplies, and other industrial applications.

The NC7SZ08 is a single 2-Input AND Gate from Fairchild’s Ultra High Speed Series of TinyLogic™. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.8V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage

The TPS70950DRVR is a 150mA linear voltage regulator from Texas Instruments. It is designed to provide a regulated output voltage from an input voltage of up to 6.5V. It has a wide operating temperature range of -40°C to 125°C and is available in a 6-SON (2x2) package.

IC LOAD SWITCH SOT25 Digi-Key DIST Single 5.5V 3A 5-Pin SOT-25 T/R Arrow

Two circuit configurations • Excellent parametric tracking • Ultra precision ration matching • Products with lead-free terminations meet EU RoHS and China RoHS requirements

The MC33275DT-3.3RKG is an ON Semiconductor integrated circuit linear voltage regulator with a voltage output of 3.3V and a voltage dropout typical of 0.26V @ 300mA. It has a mounting style of SMD/SMT, a package case of TO-252-3, DPak (2 Leads + Tab), SC-63, and an operating temperature range of -40 C. It has one output, a voltage regulation accuracy of 1%, an output type of fixed, and an Ib input bias current of 1.5 mA. It is suitable for applications such as power supplies, battery chargers, and other power management applications.

The TPS 534 thermopile sensor in TO 5 type housing employs a chip of 1.2 x 1.2 mm2 absorber size and a 30 kV thermistor as temperature reference. The round window opening is equipped with a 5.5 µm longpass (standard) infrared filter. The sensor shows a flat sensitivity characteristics over the wavelength.

The AT32UC3A3/A4 is a complete System-On-Chip microcontroller based on the AVR32 UC RISC processor running at frequencies up to 66MHz. AVR32 UC is a high-performance 32-bit RISC microprocessor core, designed for cost-sensitive embedded applications, with particular emphasis on low power consumption, high code density and high performance.

The NCP583SQ30T1G is a 3V linear voltage regulator from ON Semiconductor. It is a low-dropout (LDO) regulator with a maximum output current of 150mA. It is housed in a SC82AB package and features a low quiescent current of only 1.2mA. The NCP583SQ30T1G is designed to provide a stable output voltage with low noise and low power consumption

The Texas Instruments DC Switching Regulators TPS62150RGTR are step-down regulators with a synchronous rectifier and a switching frequency of 2.5 MHz. They have an input voltage range of 3 V to 17 V and an output voltage range of 0.6 V to 5.5 V with a maximum output current of 1.5 A. The unit weight is 0.001623 oz and the supplier device package is 16-QFN (3x3). The operating temperature range is -40°C to 85°C (TA)

The TPS78318DDCT is a low-dropout (LDO) linear voltage regulator from Texas Instruments. It is designed to provide a regulated output voltage of 1.8V with a maximum output current of 150mA. The device features a low quiescent current of only 1.2mA and a low dropout voltage of only 0.2V. It also features a wide input voltage range of 2.7V to 5.5V and a fast transient response

The TI Instrumentation Amplifier OPA170AIDBVR is a single-channel, low-power, low-noise amplifier with a high common-mode rejection ratio (CMRR) of 90 dB. It has a maximum supply voltage of 36 V and a minimum supply voltage of 2.7 V. The input bias current is 15 pA and the input offset voltage is 1.8 mV. It is packaged in a reel and has a unit weight of 0.001058 oz

The LTC1594LCS#PBF is a microPOWER™ MUX-S/H-ADC from Linear Technology Integrated Circuits (ICs) Analog to Digital Converters (ADC). It has an operating temperature range of 0°C to 70°C and a data interface of SPI. It has an external reference type, a SAR architecture, a 5V voltage supply digital, 4 inputs, a single ended input type, and a 12-bit resolution.

The SN74AVC16T245DGVR is a voltage translator and level shifter from Texas Instruments. It is a bidirectional device with two circuits, each with eight channels. It is designed to translate between two different voltage levels, allowing for communication between two different voltage domains. It is capable of data rates up to 380 Mbps and operates over a temperature range of -40°C to 85°C. The device is packaged in a 48-TVSOP package and is designed for surface mount applications. It is suitable for use in a variety of applications, including automotive, industrial, and consumer electronics.

Description: The LM1117MPX-3.3/NOPB TI Integrated Circuits (ICs) Linear Voltage Regulators are designed to provide a regulated output voltage of 3.3V with an accuracy of +/- 1%. The voltage dropout is typically 1.2V @ 800mA and the regulator topology is positive fixed. The device package is SOT-223-4 and the number of regulators is 1. The line regulation is 1 mV and the series is LM1117-3.3. The voltage input is up to 15V and the mounting type is surface mount. The number of outputs is 1

The LT®1964 is a micropower low noise, low dropout negative regulator. The device is capable of supplying 200mA of output current with a dropout voltage of 340mV. Low quiescent current (30μA operating and 3μA shutdown) makes the LT1964 an excellent choice for battery-powered applications. Quiescent current is well controlled in dropout.

Linear Voltage Regulator IC Positive Fixed 1 Output 3.3V 150mA 6-SON (2x2) Digi-Key LDO Regulator Pos 3.3V 0.15A 6-Pin WSON EP T/R Arrow LDO Voltage Regulators 150mA 30V Ultra-Low IQ Wide Inpt LDO Reg

The AZ1117IH-3.3TRG1 is a low dropout (LDO) linear voltage regulator with an output current of 1.35 A, a power supply ripple rejection (PSRR) of 70 dB, and an input voltage of up to 15V. It has a positive fixed regulator topology and a voltage regulation accuracy of 1%. The current limit is 1A and the output current is 800mA. The output voltage is 3.3V and the packaging is Digi-ReelR Alternate Packaging. This linear voltage regulator is suitable for a wide range of applications, including power supplies, battery chargers, and portable electronics. It is also suitable for automotive applications, such as power management systems, and industrial applications, such as motor control systems.

The AP2139AK-3.3TRG1 is a positive fixed linear voltage regulator with a single regulator and a voltage output of 3.3V. It has a maximum input voltage of 6.6V and a typical voltage dropout of 0.4V at 250mA. It is packaged in a SC-74A, SOT-753 and has an operating temperature range of -40°C to 85°C. Features: • Positive fixed linear voltage regulator • Single regulator • Voltage output of 3.3V • Maximum input voltage of 6.6V • Typical voltage dropout of 0.4V at 250mA • Packaged in a SC-74A, SOT-753 • Operating temperature range of -40°C to 85°C Applications: • Power supplies • Battery-powered devices • Automotive electronics • Industrial electronics • Telecommunications equipment

The Microchip Linear Voltage Regulators MCP1812AT-033/OT are designed to provide a reliable and efficient power supply solution for a variety of applications. This device is a 0.6V @ 300mA over current positive SC-74A SOT-753 voltage regulator. It features a low dropout voltage, low quiescent current, and high power supply rejection ratio. The device also has a wide input voltage range of 2.7V to 6.5V and a wide output voltage range of 0.6V to 5.5V. It is also capable of providing up to 300mA of output current. The device is also designed to be highly efficient, with a typical efficiency of up to 95%. The device is also designed to be highly reliable, with a maximum junction temperature of 150°C. The device is also RoHS compliant and is available in a variety of packages. The Microchip Linear Voltage Regulators MCP1812AT-033/OT are an ideal solution for providing a reliable and efficient power supply solution for a variety of applications.

The TI Linear Voltage Regulators TLV70433DBVT are low dropout (LDO) regulators that provide a regulated output voltage of 3.3V with an input voltage range of up to 24V. The device features a 150mA output current, 2% voltage regulation accuracy, and an operating temperature range of -40°C to 125°C. The device is available in a SOT-23-5, SC-74A, and SOT-753 package. The TLV70433DBVT is suitable for a wide range of applications, including automotive, industrial, and consumer electronics. It can be used in applications such as power management, voltage regulation, and battery charging.

The MCP1702T-3302E/CB is a low quiescent current low dropout (LDO) voltage regulator in 3 pin SOT-23A package. This regulator is an ideal choice for two to six primary cell battery powered applications, 9V alkaline and one or two cell Li-Ion powered applications. Output voltage tolerance of MCP1702 is typically ±0.4% at +25°C and ±3% maximum over operating junction temperature range of -40°C to +125°C. Line regulation is ±0.1% typical at 25°C. When only 1F of output capacitance is used, the LDO output is steady. Electrolytic capacitors made of ceramic, tantalum, or aluminum can be utilized for input and output. Overcurrent and overtemperature protection provides a reliable solution for every application. Short circuit protection. Fixed output voltage is 3.3V

Linear Voltage Regulators

he MSP430F5510IRGZT TEXAS INSTRUMENTS Integrated Circuits (ICs) Microcontrollers is a series 5 processor with a voltage supply of 1.8 V ~ 3.6 V. It features an 8x10b A/D data converter, FLASH program memory, 31 I/O input/output, Brown-out Detect/Reset, DMA, POR, PWM, WDT, SRAM data RAM type, I2C, IrDA, LIN, SCI, SPI, UART/USART, USB connectivity, and an operating supply voltage of 1.8 V to 3.6 V. Features of the MSP430F5510IRGZT TEXAS INSTRUMENTS Integrated Circuits (ICs) Microcontrollers include a series 5 processor, 8x10b A/D data converter, FLASH program memory, 31 I/O input/output, Brown-out Detect/Reset, DMA, POR, PWM, WDT, SRAM data RAM type, I2C, IrDA, LIN, SCI, SPI, UART/USART, USB connectivity, and an operating supply voltage of 1.8 V to 3.6 V. Applications of the MSP430F5510IRGZT TEXAS INSTRUMENTS Integrated Circuits (ICs) Microcontrollers include industrial automation, medical devices, consumer electronics, and automotive applications.