Results for
Hong Kong
The Texas Instruments LM2675M-5.0/NOPB is a DC switching regulator that provides a regulated output voltage of 5V with a maximum output current of 1A. It is a step-down regulator that operates at a switching frequency of 260kHz and is housed in an 8-pin surface mount SOIC package.
Request for a quoteHong Kong
The LM5017SD/NOPB is a synchronous buck regulator from Texas Instruments. It is a high-efficiency, low-noise, adjustable switching regulator that can deliver up to 0.6A of output current. It is designed to operate from a wide input voltage range of 4.5V to 36V and can be used to generate output voltages as low as 0.8V. The LM5017SD/NOPB is housed in an 8-pin WSON package and is ideal for applications such as point-of-load regulation, battery charging, and LED lighting.
Request for a quoteHong Kong
The Texas Instruments DC Switching Regulators TPS62150RGTR are step-down regulators with a synchronous rectifier and a switching frequency of 2.5 MHz. They have an input voltage range of 3 V to 17 V and an output voltage range of 0.6 V to 5.5 V with a maximum output current of 1.5 A. The unit weight is 0.001623 oz and the supplier device package is 16-QFN (3x3). The operating temperature range is -40°C to 85°C (TA)
Request for a quoteHong Kong
The LX7175CLD is a synchronous buck switching regulator from Microsemi. It is a 3.5A adjustable regulator with a 10-pin DFN package. It is designed to provide a high efficiency, low noise, and low output voltage ripple solution for a wide range of applications. • 3.5A adjustable output current • 10-pin DFN package • Synchronous buck switching regulator • High efficiency • Low noise • Low output voltage ripple • Wide input voltage range (4.5V to 28V) • Output voltage range (0.8V to 5.5V) • Programmable switching frequency (200kHz to 2.2MHz) • Programmable soft-start • Over-temperature protection • Over-current protection • Short-circuit protection Applications: The LX7175CLD is suitable for a wide range of applications, including: • Automotive • Industrial • Computing • Networking • Telecom • Portable electronics • Battery-powered systems
Request for a quoteHong Kong
The ADG333ABRSZ is an analog switch, multiplexer, and demultiplexer. It is designed to switch analog signals between two or more sources. It can be used to switch between multiple analog signals, multiplex multiple analog signals, or demultiplex multiple analog signals. It is suitable for applications such as signal routing, signal conditioning, and signal switching. It is also suitable for use in audio, video, and data processing applications. It features low power consumption, low on-resistance, and fast switching times. It is available in a 20-pin SSOP package.
Request for a quoteHong Kong
Description: The TC7662BEOA713 is a DC switching regulator IC from Microchip. It is a high-efficiency, low-noise, low-dropout, and low-cost switching regulator. It is designed to provide a regulated output voltage from an unregulated input voltage. Features: • High efficiency: up to 95% • Low noise: <50mV RMS • Low dropout voltage: <200mV • Low cost • Wide input voltage range: 2.7V to 5.5V • Output voltage range: 0.8V to 5V • Output current: up to 20mA • 8-pin SOIC package Applications: The TC7662BEOA713 is suitable for a wide range of applications, including: • Battery-powered systems • Automotive systems • Portable electronics • Industrial systems • Medical systems • Telecommunications systems
Request for a quoteHong Kong
The ADG408BRUZ-REEL7 is an analog switch, multiplexer, and demultiplexer from Analog Devices. It is a single 8-channel device that can be used to switch, multiplex, or demultiplex signals. It is housed in a TSSOP-16 package and has a resistance of 100 Ohms. Features: • Low On-Resistance: 100 Ohms • Low Off-Leakage Current: 0.1nA • Low On-Capacitance: 0.5pF • Low Off-Capacitance: 0.2pF • Low Crosstalk: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB
Request for a quoteHong Kong
The DG409DYZ is an integrated circuit (IC) analog switch, multiplexer, and demultiplexer from Intersil. It is a two-channel device with a maximum on-resistance of 100 ohms and a maximum off-time of 120 ns. It is designed for surface mount technology (SMT) and has a maximum operating temperature of +85°C. The supply voltage range is 5V and the unit weight is 0.005069 oz. It is packaged in a tube. Features: • Maximum on-resistance of 100 ohms • Maximum off-time of 120 ns • Maximum operating temperature of +85°C • Supply voltage range of 5V • Unit weight of 0.005069 oz • Packaged in a tube • Maximum on-time of 180 ns Applications: The DG409DYZ IC is suitable for a variety of applications, including signal routing, signal switching, and signal multiplexing. It can be used in a variety of consumer electronics, automotive, and industrial applications.
Request for a quoteHong Kong
The ADG1206YRUZ is an integrated circuit (IC) analog switch, multiplexer, and demultiplexer from Analog Devices. It is part of the ADG1206 series and is housed in a TSSOP-28 package.
Request for a quoteHong Kong
The LTC3862IGN#TRPBF is a linear DC-DC switching controller from Analog Devices. It is designed to provide a high-efficiency, low-noise, and low-EMI solution for a wide range of DC-DC conversion applications. It features a wide input voltage range of 4.5V to 28V, a wide output voltage range of 0.8V to 40V, and a maximum output current of 6A. The device also features a high-frequency switching frequency of 75kHz to 500kHz, a duty cycle of up to 0.96, and a synchronous rectifier for improved efficiency. The LTC3862IGN#TRPBF is available in a 24-SSOP package and is supplied in tape and reel (TR) alternate packaging. It is suitable for use in a variety of applications, including automotive, industrial, and consumer electronics
Request for a quoteHong Kong
Description: The LMR36520ADDAR is a SIMPLE SWITCHER® DC DC switching controller from Texas Instruments. It is designed to provide a regulated output voltage of 1V with a maximum current output of 2A. It has a wide input voltage range of 4.2V to 28V and is capable of synchronous rectification
Request for a quoteHong Kong
The MAX1630A–MAX1635A are buck-topology, step down, switch-mode, power-supply controllers that gener ate logic-supply voltages in battery-powered systems. These high-performance, dual-/triple-output devices include on-board power-up sequencing, power-good signaling with delay, digital soft-start, secondary winding control, low-dropout circuitry, internal frequency-compensation networks, and automatic bootstrapping
Request for a quoteHong Kong
The AD536A is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components.
Request for a quoteHong Kong
Buck Switching Regulator IC Positive Adjustable 2.51V 1 Output 2A 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Hong Kong
The Cirrus Logic CS42L52-CNZ is a low-power, stereo audio codec with integrated headphone amplifier. It is designed to provide high-quality audio performance in a wide range of consumer and professional audio applications. The CS42L52-CNZ features a 24-bit serial interface, a wide operating temperature range of -40°C to 85°C, and a 40-QFN exposed pad (6x6) package. It operates from a single 1.65 V to 2.63 V supply voltage.
Request for a quoteHong Kong
Linear Voltage Regulator IC Positive Fixed 1 Output 3.3V 150mA 6-SON (2x2) Digi-Key LDO Regulator Pos 3.3V 0.15A 6-Pin WSON EP T/R Arrow LDO Voltage Regulators 150mA 30V Ultra-Low IQ Wide Inpt LDO Reg
Request for a quoteHong Kong
The Atmel ATmega48/88/168 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega48/88/168 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed
Request for a quoteHong Kong
Description:The AP1533SG-13 is a DC switching regulator based on a buck topology with a maximum operating temperature of +85°C. It has a voltage output of up to 23V, a minimum supply voltage of 4V, and a switching frequency of 300kHz. It is part of the AP1533 series and has an operating temperature range of -25°C to +85°C (TA)
Request for a quoteHong Kong
The TPS 534 thermopile sensor in TO 5 type housing employs a chip of 1.2 x 1.2 mm2 absorber size and a 30 kV thermistor as temperature reference. The round window opening is equipped with a 5.5 µm longpass (standard) infrared filter. The sensor shows a flat sensitivity characteristics over the wavelength.
Request for a quoteHong Kong
The VNQ5050KTR-E is a high side power distribution switch and load driver integrated circuit (IC) from STMicroelectronics. It has an operating temperature range of -40°C to 150°C (TJ) and is packaged in a 24-SOP (0.295", 7.50mm Width) Exposed Pad SMD/SMT package. It has a minimum supply voltage of 4.5V and a non-inverting configuration. The turn-on delay time is 15000 ns and the ratio of output to input is 1:1. It is available in Digi-ReelR Alternate Packaging.
Request for a quoteHong Kong
The IPS511G IR Integrated Circuits (ICs) Power Distribution Switches, Load Drivers are designed to provide a high side switch with a 1:1 ratio of output to input. The device features a non-inverting input type, a voltage load of 5.5 V ~ 35 V, a TO-220AB (5-LEAD) supplier device package, an operating temperature of -40°C ~ 150°C (TJ), a Rds-On-Typ of 110 mOhm, a general purpose switch type, a TO-220-5 package case, and one output. Features: * Non-inverting input type * Voltage load of 5.5 V ~ 35 V * TO-220AB (5-LEAD) supplier device package * Operating temperature of -40°C ~ 150°C (TJ) * Rds-On-Typ of 110 mOhm * General purpose switch type * TO-220-5 package case * One output Applications: The IPS511G IR Integrated Circuits (ICs) Power Distribution Switches, Load Drivers are suitable for a variety of applications, including automotive, industrial, and consumer electronics. They can be used to control power distribution, switch loads, and drive motors.
Request for a quoteHong Kong
The MP5087GG-Z is a high-side load driver designed to provide high-efficiency, high-performance power distribution for general purpose switching applications. This device provides an output voltage range of 0.5 V to 5.5 V with a maximum current output of 7A, making it suitable for use in a wide variety of industries. It has an operating temperature range of -40°C to +125°C and a Rds-On-Typ of 10 mOhm. The switch type is general purpose with one output, packaged in a 12-QFN (2x2) and is powered by a voltage supply of 3 V to 5.5 V. Features: - High-efficiency, high-performance power distribution for general purpose switching - 0.5 V to 5.5 V output voltage range with 7A maximum current output - Operating temperature range of -40°C to +125°C - Rds-On-Typ of 10 mOhm - General purpose switch type with one output - 12-QFN (2x2) package - 3 V to 5.5 V voltage supply Applications: The MP5087GG-Z is suitable for a variety of industrial applications
Request for a quoteHong Kong
The TPS22965DSGR is a 6A load discharge, slew rate controlled N-Channel 8-WSON (2x2) general purpose power distribution switch with a wide operating temperature range of -40°C to 105°C (TA). It is designed to provide a low-cost, low-power solution for power distribution applications. The device features a low on-resistance of 0.3Ω and a low quiescent current of 0.2μA. The device also features a slew rate control function that allows for a smooth transition between on and off states. Features: • 6A load discharge • Slew rate controlled • Wide operating temperature range of -40°C to 105°C (TA) • Low on-resistance of 0.3Ω • Low quiescent current of 0.2μA • Slew rate control function for smooth transition between on and off states • N-Channel 8-WSON (2x2) general purpose • 2.5 V ~ 5.7 V operating voltage Applications: The TPS22965DSGR is suitable for a wide range of power distribution applications, including automotive, industrial, and consumer electronics.
Request for a quoteHong Kong
IC LOAD SWITCH SOT25 Digi-Key DIST Single 5.5V 3A 5-Pin SOT-25 T/R Arrow
Request for a quoteHong Kong
The Infineon Technologies BTS500851TMAATMA1 is a power switching IC designed to control current distribution in high-power applications. It has a small TO-220-7 package, supporting SMD/SMT mount methods. It also features an internal thermal shutdown circuit to protect against damage when exposed to high temperatures
Request for a quoteHong Kong
The TPS1H100AQPWPRQ1 is a high-side power distribution switch and load driver from Texas Instruments. It is designed to provide a high-side switch with a low on-resistance of 0.2Ω and a low quiescent current of 0.5mA. It is suitable for applications such as automotive, industrial, and consumer electronics
Request for a quoteResults for
Switch - Import exportNumber of results
33 ProductsCountries
Company type