Results for
KYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The ADI Digital Potentiometer AD5254BRUZ10 is a 10k ohm, 20-pin TSSOP device that provides a digitally controlled variable resistor. It is designed to operate over a temperature range of -40°C to 105°C and has a tolerance of ±30%. It is an I2C device and can be used to adjust the resistance of a circuit in a wide range of applications. Features: • 10k ohm resistance • 20-pin TSSOP package • Operating temperature range of -40°C to 105°C • ±30% tolerance • I2C interface Applications: The ADI Digital Potentiometer AD5254BRUZ10 can be used in a wide range of applications, including: • Adjusting the gain of amplifiers • Adjusting the brightness of LED displays • Adjusting the speed of motors • Adjusting the frequency of oscillators • Adjusting the sensitivity of sensors
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The ALLEGRO Power Distribution Switches, Load Drivers UDN2981A are 18-DIP package bipolar output type devices that offers 8 outputs which are configured on 1:1 ratio of the output to the input. This device does not require voltage supply Vcc or Vdd, making it a very efficient device. Its electrical parameters lie within the range of a 5 V to 50 V voltage load.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The Microchip Network Interface Card (NIC) ENC28J60T-I/SS is a 10 Mbps Ethernet controller with an integrated PHY and MAC. It is designed to provide a low-cost, low-power solution for connecting microcontrollers to Ethernet networks. The ENC28J60T-I/SS is available in a 28-pin SSOP package and is compatible with the industry-standard 10 Base-T protocol. It supports full-duplex and half-duplex operation and has a maximum current consumption of 160mA. The ENC28J60T-I/SS is suitable for a wide range of applications, including industrial automation, home automation, building automation, and medical device networking. It is also suitable for use in embedded systems, such as those used in consumer electronics, automotive, and IoT applications.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The DG409DYZ is an integrated circuit (IC) analog switch, multiplexer, and demultiplexer from Intersil. It is a two-channel device with a maximum on-resistance of 100 ohms and a maximum off-time of 120 ns. It is designed for surface mount technology (SMT) and has a maximum operating temperature of +85°C. The supply voltage range is 5V and the unit weight is 0.005069 oz. It is packaged in a tube. Features: • Maximum on-resistance of 100 ohms • Maximum off-time of 120 ns • Maximum operating temperature of +85°C • Supply voltage range of 5V • Unit weight of 0.005069 oz • Packaged in a tube • Maximum on-time of 180 ns Applications: The DG409DYZ IC is suitable for a variety of applications, including signal routing, signal switching, and signal multiplexing. It can be used in a variety of consumer electronics, automotive, and industrial applications.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
Photoelectric Counter Various Kinds Of Readers Position Detection
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The Freescale / NXP MC9S08SH8CSC is an 8-bit microcontroller with 8KB of Flash memory. It is designed for use in a wide range of applications, from automotive to consumer electronics. The MCU is capable of operating at speeds up to 40MHz and is housed in an 8-SOIC package. It is also rated for operation over a temperature range of -40°C to 85°C (TA). The MC9S08SH8CSC features a wide range of peripherals, including a 10-bit ADC, SPI, I2C, UART, and a variety of timers. It also has a low-power sleep mode, allowing it to conserve power when not in use. The MCU is also compatible with a variety of development tools, including CodeWarrior and IAR Embedded Workbench. The Freescale / NXP MC9S08SH8CSC is an ideal choice for applications requiring a low-power, high-performance 8-bit microcontroller. It is well-suited for a variety of applications
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The 74HC175PW,118 NXP Semiconductors Integrated Circuits (ICs) Flip-Flop is a D-Type flip-flop with a voltage-supply of 2 V ~ 6 V and an operating-temperature of -40°C ~ 125°C (TA). It has a single element and a current-output-high-low of 5.2mA, 5.2mA. It is packaged in a Tape & Reel (TR) Alternate Packaging and has a frequency-clock of 89MHz. It has a surface mount mounting-type and a max-propagation-delay-v-max-cl of 30ns @ 6V, 50pFFeatures: • Voltage-supply of 2 V ~ 6 V • Operating-temperature of -40°C ~ 125°C (TA) • Single element • Current-output-high-low of 5.2mA, 5.2mA • Packaged in a Tape & Reel (TR) Alternate Packaging • Frequency-clock of 89MHz • Surface mount mounting-type • Max-propagation-delay-v-max-cl of 30ns @ 6V, 50pF Applications: • Automotive • Industrial • Consumer • Medical • Telecommunications
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The ON Semiconductor MC74VHC1G08DFT2G is a single 2-input AND gate in a SC-70 package. It is a high-speed CMOS logic device that operates from a single 5.5 V supply. The device features low power consumption and high noise immunity. Features: • Low power consumption • High noise immunity • Single 5.5 V supply • High-speed CMOS logic • Surface mount • Operating temperature range: -55°C to 125°C • Package: SC-70 • Alternate Packaging: Digi-ReelR • Input leakage current: 1μA Applications: The MC74VHC1G08DFT2G is suitable for a wide range of applications, including logic gates, logic buffers, and logic inverters. It is also suitable for use in automotive, industrial, and consumer applications.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable. Features • Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver • RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths • RGMII with 3.3V/2.5V/1.8V tolerant I/Os • Auto-negotiation to automatically select the highest link up speed (10/100/1000Mbps) and duplex (half/full) • On-chip termination resistors for the differential pairs • On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core • Jumbo frame support up to 16KB • 125MHz reference clock output
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The AP2139AK-3.3TRG1 is a positive fixed linear voltage regulator with a single regulator and a voltage output of 3.3V. It has a maximum input voltage of 6.6V and a typical voltage dropout of 0.4V at 250mA. It is packaged in a SC-74A, SOT-753 and has an operating temperature range of -40°C to 85°C. Features: • Positive fixed linear voltage regulator • Single regulator • Voltage output of 3.3V • Maximum input voltage of 6.6V • Typical voltage dropout of 0.4V at 250mA • Packaged in a SC-74A, SOT-753 • Operating temperature range of -40°C to 85°C Applications: • Power supplies • Battery-powered devices • Automotive electronics • Industrial electronics • Telecommunications equipment
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The AD813ARZ-14 is a high-speed, low-power video amplifier module from Analog Devices Inc. It is designed for use in video applications such as video switching, video distribution, video signal processing, and video signal conditioning. It features a wide bandwidth of 100 MHz, a low current supply of 4.5 mA, and a slew rate of 250V/µs. It is available in a 14-SOIC package and operates over a temperature range of -40°C to 85°C.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The LT3751EFE#PBF from Analog Devices / Linear Technology is a specialized power management IC designed for use in battery charging applications. This IC is capable of controlling and charging up to 20 cells in series, making it ideal for use in high-capacity battery packs. It features a wide input voltage range of 4.5V to 40V, allowing it to be used in a variety of applications. The LT3751EFE#PBF also features a wide operating temperature range of -40°C to +125°C, making it suitable for use in extreme environments. Additionally, it has a low quiescent current of only 1.5mA, making it highly efficient. The LT3751EFE#PBF is housed in a 20-pin TSSOP package, making it easy to integrate into existing designs. With its wide input voltage range, wide operating temperature range, and low quiescent current, the LT3751EFE#PBF is an ideal choice for battery charging applications.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The LX7175CLD is a synchronous buck switching regulator from Microsemi. It is a 3.5A adjustable regulator with a 10-pin DFN package. It is designed to provide a high efficiency, low noise, and low output voltage ripple solution for a wide range of applications. • 3.5A adjustable output current • 10-pin DFN package • Synchronous buck switching regulator • High efficiency • Low noise • Low output voltage ripple • Wide input voltage range (4.5V to 28V) • Output voltage range (0.8V to 5.5V) • Programmable switching frequency (200kHz to 2.2MHz) • Programmable soft-start • Over-temperature protection • Over-current protection • Short-circuit protection Applications: The LX7175CLD is suitable for a wide range of applications, including: • Automotive • Industrial • Computing • Networking • Telecom • Portable electronics • Battery-powered systems
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The LTC2440CGN#PBF is a high-performance, low-power, 16-bit, sigma-delta analog-to-digital converter (ADC) with an SPI interface. It is designed to provide accurate, low-noise conversion of differential analog signals in a wide range of applications. The LTC2440CGN#PBF features a wide input range of 0°C to 70°C, a low power consumption of only 1.2 mW, and a fast conversion rate of up to 1.5 MSPS. It also offers a wide range of features, including a programmable gain amplifier, a programmable digital filter, and a programmable reference voltage. The LTC2440CGN#PBF is ideal for applications such as medical imaging, industrial process control, and automotive systems. It is available in a 16-SSOP package and is RoHS compliant.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The Microchip Linear Voltage Regulators MCP1812AT-033/OT are designed to provide a reliable and efficient power supply solution for a variety of applications. This device is a 0.6V @ 300mA over current positive SC-74A SOT-753 voltage regulator. It features a low dropout voltage, low quiescent current, and high power supply rejection ratio. The device also has a wide input voltage range of 2.7V to 6.5V and a wide output voltage range of 0.6V to 5.5V. It is also capable of providing up to 300mA of output current. The device is also designed to be highly efficient, with a typical efficiency of up to 95%. The device is also designed to be highly reliable, with a maximum junction temperature of 150°C. The device is also RoHS compliant and is available in a variety of packages. The Microchip Linear Voltage Regulators MCP1812AT-033/OT are an ideal solution for providing a reliable and efficient power supply solution for a variety of applications.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The MC68HC711E9CFN2 is a 8-bit microcontroller from Freescale Semiconductor. It is based on the HC11 architecture and is designed for embedded applications. It has an operating temperature range of -40°C to 85°C (TA) and features 12KB of OTP (12K x 8) memory. It has a maximum clock frequency of 2MHz and is packaged in a 52-PLCC (19.1x19.1) package. Features: • 8-bit microcontroller based on the HC11 architecture • Operating temperature range of -40°C to 85°C (TA) • 12KB of OTP (12K x 8) memory • Maximum clock frequency of 2MHz • Packaged in a 52-PLCC (19.1x19.1) packag Applications: • Automotive• Industrial • Consumer • Medical • Aerospace • Military
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The XCR3128XL-10VQ100C is a Complex Programmable Logic Device (CPLD) from Xilinx. It is a 9.1ns surface mount device with a temperature range of 0°C to 70°C (TA). It is in-system programmable with a minimum of 1K program/erase cycles. It is packaged in a 100-VQFP (14x14) CoolRunner XPLA3 tray.Features: • 9.1ns access time • 0°C to 70°C (TA) temperature range • In-system programmable with a minimum of 1K program/erase cycles • 100-VQFP (14x14) CoolRunner XPLA3 tray Applications: The XCR3128XL-10VQ100C CPLD is suitable for a wide range of applications, including: • Automotive • Industrial• Medical • Networking • Telecommunications • Consumer electronics • Aerospace and defense
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
Atmel ATXMEGA128A4U-MHR is an 8-bit microcontroller with 128KB of Flash memory and 44-pin QFN package. It is based on the AVR XMEGA architecture and is designed for applications requiring high performance, low power consumption, and advanced peripherals. Features: • 128KB of Flash memory • 44-pin QFN package • Up to 32MHz clock frequency • Up to 32-bit wide data bus • Up to 16-bit wide instruction bus • Up to 8-channel DMA controller • Up to 8-channel Event System • Up to 8-channel Analog Comparator • Up to 8-channel 10-bit ADC • Up to 4-channel 10-bit DAC • Up to 4-channel USART • Up to 4-channel SPI • Up to 4-channel I2C • Up to 4-channel Timer/Counter • Up to 4-channel PWM • Up to 4-channel RTC • Up to 4-channel Watchdog Timer • Up to 4-channel Event System • Up to 4-channel Real-Time Clock • Up to 4-channel Programmable Logic Unit • Up to 4-channel Programmable Gain Amplifier • Up to 4-channel Programmable Voltage Reference
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
AT27LV256A-90JU-T from Microchip Technology / Atmel is a 256Kb (32K x 8) EPROM technology based memory IC with Parallel interface. Power supply voltage range is 3V ~ 3.6V and 4.5V ~ 5.5V and the access time is 90ns. The device is available in Cut Tape (CT) packaging and is specified for operating temperature from -40°C ~ 85°C (TC). Features: • Memory Capacity: 256Kb (32K x 8) • Memory Format: EPROM • Memory Interface: Parallel • Access Time: 90ns • Power Supply Voltage: 3V ~ 3.6V, 4.5V ~ 5.5V • Operating Temperature: -40°C ~ 85°C (TC) • Series: AT27LV256A • Technology: EPROM - OTP • Factory Pack Quantity: 750 • Packaging: Cut Tape (CT) Applications: AT27LV256A-90JU-T from Microchip Technology / Atmel is suitable to be used in embedded systems, consumer electronics, automotive, mission-critical sensors, IoT, and industrial equipment.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The MAX526DCWG is a digital-to-analog converter (DAC) from Maxim Integrated. This device is designed to provide high-precision, low-noise performance in a wide range of applications. It features a R-2R parallel architecture, a temperature range of 0°C to 70°C, and a fast settling time of 3μs (typical). The MAX526DCWG is available in a 24-pin SOIC W package, making it suitable for a variety of applications. The MAX526DCWG offers a wide range of features, including a low-noise, low-distortion output, a wide input voltage range, and a fast settling time. It also features a low-power shutdown mode, allowing it to be used in battery-powered applications. Additionally, the device is designed to be immune to clock jitter, making it suitable for use in high-speed systems. Overall, the MAX526DCWG is an ideal choice for applications requiring high-precision, low-noise performance.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
ATMEL Microcontrollers ATSAMD21G18A-AU is a low-power MCU based on the ARM Cortex M0+ Core. This MCU has 38 I/O pins and is housed inside a 48-TQFP package. It also has an internal oscillator and a 48 MHz speed processor. The microcontroller has Connectivity features such as I2C, LIN, SPI, and UART/USART. Furthermore, it has 14x12b A/D Data Converters and 1x10b D/A Data Converters. The Brown-out Detect/Reset, DMA, I2S, POR, PWM and WDT are the peripherals included in this microcontroller. Features: • Low-power MCU based on the ARM Cortex M0+ Core • 38 I/O pins and 48-TQFP package • Internal oscillator and 48 MHz speed processor • Connectivity features such as I2C, LIN, SPI, and UART/USART • 14x12b A/D Data Converters & 1x10b D/A Data Converters • Brown-out Detect/Reset, DMA, I2S, POR, PWM and WDT peripherals Applications: • Automotive control systems • Industrial control systems • Robotics • Home Automation Systems • Data Acquisition and Signal Processing • Medical Devices
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The MC33275DT-3.3RKG is an ON Semiconductor integrated circuit linear voltage regulator with a voltage output of 3.3V and a voltage dropout typical of 0.26V @ 300mA. It has a mounting style of SMD/SMT, a package case of TO-252-3, DPak (2 Leads + Tab), SC-63, and an operating temperature range of -40 C. It has one output, a voltage regulation accuracy of 1%, an output type of fixed, and an Ib input bias current of 1.5 mA. It is suitable for applications such as power supplies, battery chargers, and other power management applications.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The INA240A3DR is an instrumentation amplifier from Texas Instruments with an operating temperature of -40°C~125°C. It has a low current supply of 1.8mA and-3dB bandwidth of 400kHz. It includes an 8-SOIC, Tape & Reel (TR) Cut Tape (CT) Digi-Reel® package with a max spanning voltage supply of 5.5V and a current input bias of 90μA. It features a voltage input offset of 5μV, making it ideal for high accuracy applications. Features: • Low current supply: 1.8mA • -3dB bandwidth: 400kHz • Voltage input offset: 5μV • Operating temperature: -40°C~125°C • 8-SOIC, Tape & Reel (TR) Cut Tape (CT) Digi-Reel® package • Max spanning voltage supply: 5.5V • Current input bias: 90μAThis instrumentation amplifier from Texas Instruments is suitable for applications that require a high level of accuracy. It is mainly used in signal conditioning circuits in medical, industrial, and consumer product designs. These amplifiers are also suitable for sensing applications in high precision communication devices.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The MC14106B hex Schmitt Trigger is constructed with MOS P−channel and N−channel enhancement mode devices in a single monolithic structure. These devices find primary use where low power dissipation and/or high noise immunity is desired. The MC14106B may be used in place of the MC14069UB hex inverter for enhanced noise immunity or to “square up” slowly changing waveforms.This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high−impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS ≤(Vin or Vout) ≤ VDD.Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD). Unused outputs must be left open.
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
Cyclone III Device Family Overview Cyclone® III device family offers a unique combination of high functionality, low power and low cost. Based on Taiwan Semiconductor Manufacturing Company (TSMC) low-power (LP) process technology, silicon optimizations and software features to minimize power consumption, Cyclone III device family provides the ideal solution for your high-volume, low-power, and cost-sensitive applications. To address the unique design needs, Cyclone III device family offers the following two variants: ■ Cyclone III—lowest power, high functionality with the lowest cost ■ Cyclone III LS—lowest power FPGAs with security With densities ranging from about 5,000 to 200,000 logic elements (LEs) and 0.5 Megabits (Mb) to 8 Mb of memory for less than ¼ watt of static power consumption, Cyclone III device family makes it easier for you to meet your power budget. Cyclone III LS devices are the first to implement a suite of security features at the silicon, software
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
Linear Voltage Regulators
Request for a quoteKYNIX SEMICONDUCTOR HONG KONG LIMITED
Hong Kong
The ON Semiconductor NCP1607BDR2G is a high-performance power factor correction (PFC) controller designed to provide superior performance in a wide range of applications. This device features a critical conduction mode (CRM) operation with a low start-up current of 23.5μA. It is housed in an 8-SOIC package and is rated for operation over a temperature range of -40°C to 125°C. The NCP1607BDR2G is designed to operate with a supply voltage range of 9.5V to 20V. The NCP1607BDR2G features a wide range of protection features, including over-voltage protection, over-current protection, and over-temperature protection. It also features a programmable soft-start and a programmable frequency foldback. The device is designed to provide high efficiency and low EMI, making it ideal for use in a variety of applications. The NCP1607BDR2G is an ideal solution for applications requiring high efficiency and low EMI
Request for a quoteResults for
Electric components - Import exportNumber of results
200 ProductsCountries
Company type