Components - Import export

The UTC OPA2336 is a CMOS operational amplifier. It is operated on a 2.1V (Min.) single supply. A100kΩ load is driven by the rail-to-rail output and the accuracy of the output voltage is ensured at ± 3mV. The UTC OPA2336 is characterized by its low quiescent current (20μA/amplifier), low offset voltage (125μV max), low input bias current (1pA), and high open-loop gain (115dB).

Following the immensely successful first-generation Cyclone® device family, Altera® Cyclone II FPGAs extend the low-cost FPGA density range to 68,416 logic elements (LEs) and provide up to 622 usable I/O pins and up to 1.1 Mbits of embedded memory. Cyclone II FPGAs are manufactured on 300-mm wafers using TSMCs 90-nm low-k dielectric process to ensure rapid availability and low cost.

The Allegro A2982SLWTR-T is a power distribution switch and load driver designed to provide a high-current, low-voltage, low-side switch for a wide range of applications. It is a bipolar 20-SOIC W package with a 500mA current rating and a temperature range of -20°C to 85°C (TA)

The LM5017SD/NOPB is a synchronous buck regulator from Texas Instruments. It is a high-efficiency, low-noise, adjustable switching regulator that can deliver up to 0.6A of output current. It is designed to operate from a wide input voltage range of 4.5V to 36V and can be used to generate output voltages as low as 0.8V. The LM5017SD/NOPB is housed in an 8-pin WSON package and is ideal for applications such as point-of-load regulation, battery charging, and LED lighting.

The LTC6090CS8E#TRPBF is a general purpose instrumentation amplifier from Linear Technology. It is a single-channel, rail-to-rail amplifier with a wide common-mode input voltage range. It features low offset voltage, low noise, and high common-mode rejection ratio (CMRR). The amplifier is housed in an 8-pin SOIC-EP package and is ideal for applications such as signal conditioning, data acquisition, and medical instrumentation

The Infineon BTN8982TAAUMA1 is a full and half-bridge driver IC designed for motor control applications. It is a high-performance, low-cost, and low-power solution for driving brushless DC (BLDC) motors. The device features a wide operating voltage range of 4.5V to 36V, a wide operating temperature range of -40°C to +125°C, and a low quiescent current of only 1.5mA. The device also features a wide range of protection features, including over-temperature protection, over-current protection, and short-circuit protection

The Atmel ATmega48/88/168 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega48/88/168 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed

Linear Voltage Regulator IC Positive Fixed 1 Output 3.3V 150mA 6-SON (2x2) Digi-Key LDO Regulator Pos 3.3V 0.15A 6-Pin WSON EP T/R Arrow LDO Voltage Regulators 150mA 30V Ultra-Low IQ Wide Inpt LDO Reg

The VNQ5050KTR-E is a high side power distribution switch and load driver integrated circuit (IC) from STMicroelectronics. It has an operating temperature range of -40°C to 150°C (TJ) and is packaged in a 24-SOP (0.295", 7.50mm Width) Exposed Pad SMD/SMT package. It has a minimum supply voltage of 4.5V and a non-inverting configuration. The turn-on delay time is 15000 ns and the ratio of output to input is 1:1. It is available in Digi-ReelR Alternate Packaging.

The ALTERA EP3C10E144I7N FPGA is a powerful and reliable Field Programmable Gate Array (FPGA) designed for a wide range of applications. This FPGA features 94 I/O pins, a 144-LQFP Exposed Pad, and a Cyclone® III 423936 Bits. It is designed to operate in temperatures ranging from -40°C to 100°C (TJ). The EP3C10E144I7N is powered by a voltage range of 1.15 V to 1.25 V. The EP3C10E144I7N is a surface mount FPGA that is ideal for applications that require high performance and reliability. It is designed to provide a low-cost solution for applications that require a high level of integration and flexibility. The EP3C10E144I7N is also designed to be easy to use and configure, making it an ideal choice for a wide range of applications.

The Cirrus Logic CS42L52-CNZ is a low-power, stereo audio codec with integrated headphone amplifier. It is designed to provide high-quality audio performance in a wide range of consumer and professional audio applications. The CS42L52-CNZ features a 24-bit serial interface, a wide operating temperature range of -40°C to 85°C, and a 40-QFN exposed pad (6x6) package. It operates from a single 1.65 V to 2.63 V supply voltage.

The TXB0104QRUTRQ1 voltage translator and level shifter from Texas Instruments is a four-channel, bidirectional, low-voltage translator capable of operating from 1.2 V to 3.6 V or 1.65 V to 5.5 V with a maximum supply voltage of 5.5 V. It has an ultra-low quiescent current of 3.5 µA and an operating temperature range of -40°C to +125°C.

The SN74LVC1G04DBVR is a single inverter gate from Texas Instruments. It is a low-voltage CMOS device that is designed for 1.65-V to 5.5-V VCC operation. The device is housed in a SOT-23-5 package and is suitable for use in a wide range of applications. Features: • Low-voltage CMOS device • 1.65-V to 5.5-V VCC operation • SOT-23-5 package • High-impedance inputs • Low-power consumption • High-noise immunity • High-speed operation • High-output current capability • ESD protection • -40°C to 125°C operating temperature range Applications: The SN74LVC1G04DBVR is suitable for a wide range of applications, including: • Automotive • Industrial • Medical • Consumer • Portable • Computing • Networking • Telecommunications

The NCV8452STT1G Motor Driver and Controller is a single output device specifically designed for automotive and AEC-Q100 compliant applications. This NMOS technology device has a surface mount mounting style and is built with a small footprint. It is designed to work with a voltage load between 5 V ~ 34 V, and its output current is rated to be 1 A. Features: - AEC-Q100 compliant - NMOS technology device - Surface mount mounting style - Operating temperature range of - 40 C - Unit weight of 0.006632 oz - Output current of 1 A - Maximum Voltage Load of 5 V ~ 34 V Applications: The NCV8452STT1G Motor Driver and Controller is ideal for general purpose applications including automotive, as it has the rated temperature range and current. It is also designed to work with a wide voltage range of 5V-34V and is AEC-Q100 compliant.

This device is a dual center tap Schottky rectifier suited for switch mode power supply and high frequency DC to DC converters. Packaged in D2PAK, this device is especially intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. Features ■ Very small conduction losses ■ Negligible switching losses ■ Extremely fast switching ■ Low thermal resistance ■ Avalanche rated ■ AEC-Q101 qualified

The AD8223ARMZ-R7 Instrumentation Amplifier is a highly reliable, single-channel amplifier, designed to provide high-sensitivity signal conditioning, while maintaining low power requirements. It features a maximum supply voltage of 24 V, a maximum input resistance of 2 GOhms, a 25 nA input bias current, and a 0.5 mA operating supply current. The amplifier has a Common Mode Rejection Ratio (CMRR) of 90 dB for excellent noise immunity, as well as a Unit-Weight of 0.004938 oz. This low-power amplifier is perfect for a wide range of applications, such as charge measurement, bio-sensing, optical strain measurement, bridge-sensor amplification, and motion control current sensors. Its user-selectable gain and bandwidth can further tailor device performance for a variety of low-noise applications. In addition, the AD8223ARMZ-R7 is RoHS-compliant and is supplied in a Reel package.

The KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable. Features • Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet transceiver • RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths • RGMII with 3.3V/2.5V/1.8V tolerant I/Os • Auto-negotiation to automatically select the highest link up speed (10/100/1000Mbps) and duplex (half/full) • On-chip termination resistors for the differential pairs • On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core • Jumbo frame support up to 16KB • 125MHz reference clock output

The AP2139AK-3.3TRG1 is a positive fixed linear voltage regulator with a single regulator and a voltage output of 3.3V. It has a maximum input voltage of 6.6V and a typical voltage dropout of 0.4V at 250mA. It is packaged in a SC-74A, SOT-753 and has an operating temperature range of -40°C to 85°C. Features: • Positive fixed linear voltage regulator • Single regulator • Voltage output of 3.3V • Maximum input voltage of 6.6V • Typical voltage dropout of 0.4V at 250mA • Packaged in a SC-74A, SOT-753 • Operating temperature range of -40°C to 85°C Applications: • Power supplies • Battery-powered devices • Automotive electronics • Industrial electronics • Telecommunications equipment

The Qualcomm Interface AR8031-AL1B is a surface mount Ethernet transceiver designed for use in a wide range of applications. It is capable of operating over a temperature range of -40°C to 85°C and is powered by a 3.3V supply. The AR8031-AL1B is compliant with the IEEE 802.3 standard and supports 10/100/1000 Mbps data rates. Features: • Compliant with IEEE 802.3 standard • Supports 10/100/1000 Mbps data rates • Low power consumption • Surface mount design • Operating temperature range of -40°C to 85°C • Powered by a 3.3V supply Applications: The Qualcomm Interface AR8031-AL1B is suitable for a wide range of applications, including: • Industrial automation • Automotive • Networking • Telecommunications • Medical • Consumer electronics

The LX7175CLD is a synchronous buck switching regulator from Microsemi. It is a 3.5A adjustable regulator with a 10-pin DFN package. It is designed to provide a high efficiency, low noise, and low output voltage ripple solution for a wide range of applications. • 3.5A adjustable output current • 10-pin DFN package • Synchronous buck switching regulator • High efficiency • Low noise • Low output voltage ripple • Wide input voltage range (4.5V to 28V) • Output voltage range (0.8V to 5.5V) • Programmable switching frequency (200kHz to 2.2MHz) • Programmable soft-start • Over-temperature protection • Over-current protection • Short-circuit protection Applications: The LX7175CLD is suitable for a wide range of applications, including: • Automotive • Industrial • Computing • Networking • Telecom • Portable electronics • Battery-powered systems

The LTC2440CGN#PBF is a high-performance, low-power, 16-bit, sigma-delta analog-to-digital converter (ADC) with an SPI interface. It is designed to provide accurate, low-noise conversion of differential analog signals in a wide range of applications. The LTC2440CGN#PBF features a wide input range of 0°C to 70°C, a low power consumption of only 1.2 mW, and a fast conversion rate of up to 1.5 MSPS. It also offers a wide range of features, including a programmable gain amplifier, a programmable digital filter, and a programmable reference voltage. The LTC2440CGN#PBF is ideal for applications such as medical imaging, industrial process control, and automotive systems. It is available in a 16-SSOP package and is RoHS compliant.

The Microchip Linear Voltage Regulators MCP1812AT-033/OT are designed to provide a reliable and efficient power supply solution for a variety of applications. This device is a 0.6V @ 300mA over current positive SC-74A SOT-753 voltage regulator. It features a low dropout voltage, low quiescent current, and high power supply rejection ratio. The device also has a wide input voltage range of 2.7V to 6.5V and a wide output voltage range of 0.6V to 5.5V. It is also capable of providing up to 300mA of output current. The device is also designed to be highly efficient, with a typical efficiency of up to 95%. The device is also designed to be highly reliable, with a maximum junction temperature of 150°C. The device is also RoHS compliant and is available in a variety of packages. The Microchip Linear Voltage Regulators MCP1812AT-033/OT are an ideal solution for providing a reliable and efficient power supply solution for a variety of applications.

The TI INA3221AQRGVRQ1 is a current shunt monitor IC designed to measure current in a wide range of applications. It features a wide input voltage range of up to 16V, low quiescent current, and low power consumption. The device also features a programmable gain of up to 200V/V, allowing for accurate current measurements over a wide range of current levels.

The Lattice LCMXO3LF-6900C-6BG256C is a low-cost, low-power, high-performance Field Programmable Gate Array (FPGA) device. It is a member of the Lattice MachXO3LF family of FPGAs and is designed to provide a cost-effective solution for a wide range of applications

The XCR3128XL-10VQ100C is a Complex Programmable Logic Device (CPLD) from Xilinx. It is a 9.1ns surface mount device with a temperature range of 0°C to 70°C (TA). It is in-system programmable with a minimum of 1K program/erase cycles. It is packaged in a 100-VQFP (14x14) CoolRunner XPLA3 tray.Features: • 9.1ns access time • 0°C to 70°C (TA) temperature range • In-system programmable with a minimum of 1K program/erase cycles • 100-VQFP (14x14) CoolRunner XPLA3 tray Applications: The XCR3128XL-10VQ100C CPLD is suitable for a wide range of applications, including: • Automotive • Industrial• Medical • Networking • Telecommunications • Consumer electronics • Aerospace and defense

The TI Linear Voltage Regulators TLV70433DBVT are low dropout (LDO) regulators that provide a regulated output voltage of 3.3V with an input voltage range of up to 24V. The device features a 150mA output current, 2% voltage regulation accuracy, and an operating temperature range of -40°C to 125°C. The device is available in a SOT-23-5, SC-74A, and SOT-753 package. The TLV70433DBVT is suitable for a wide range of applications, including automotive, industrial, and consumer electronics. It can be used in applications such as power management, voltage regulation, and battery charging.

The TPS 534 thermopile sensor in TO 5 type housing employs a chip of 1.2 x 1.2 mm2 absorber size and a 30 kV thermistor as temperature reference. The round window opening is equipped with a 5.5 µm longpass (standard) infrared filter. The sensor shows a flat sensitivity characteristics over the wavelength.

Atmel ATXMEGA128A4U-MHR is an 8-bit microcontroller with 128KB of Flash memory and 44-pin QFN package. It is based on the AVR XMEGA architecture and is designed for applications requiring high performance, low power consumption, and advanced peripherals. Features: • 128KB of Flash memory • 44-pin QFN package • Up to 32MHz clock frequency • Up to 32-bit wide data bus • Up to 16-bit wide instruction bus • Up to 8-channel DMA controller • Up to 8-channel Event System • Up to 8-channel Analog Comparator • Up to 8-channel 10-bit ADC • Up to 4-channel 10-bit DAC • Up to 4-channel USART • Up to 4-channel SPI • Up to 4-channel I2C • Up to 4-channel Timer/Counter • Up to 4-channel PWM • Up to 4-channel RTC • Up to 4-channel Watchdog Timer • Up to 4-channel Event System • Up to 4-channel Real-Time Clock • Up to 4-channel Programmable Logic Unit • Up to 4-channel Programmable Gain Amplifier • Up to 4-channel Programmable Voltage Reference