Component - Import export

Following the immensely successful first-generation Cyclone® device family, Altera® Cyclone II FPGAs extend the low-cost FPGA density range to 68,416 logic elements (LEs) and provide up to 622 usable I/O pins and up to 1.1 Mbits of embedded memory. Cyclone II FPGAs are manufactured on 300-mm wafers using TSMCs 90-nm low-k dielectric process to ensure rapid availability and low cost.

The UTC OPA2336 is a CMOS operational amplifier. It is operated on a 2.1V (Min.) single supply. A100kΩ load is driven by the rail-to-rail output and the accuracy of the output voltage is ensured at ± 3mV. The UTC OPA2336 is characterized by its low quiescent current (20μA/amplifier), low offset voltage (125μV max), low input bias current (1pA), and high open-loop gain (115dB).

The LTC6090CS8E#TRPBF is a general purpose instrumentation amplifier from Linear Technology. It is a single-channel, rail-to-rail amplifier with a wide common-mode input voltage range. It features low offset voltage, low noise, and high common-mode rejection ratio (CMRR). The amplifier is housed in an 8-pin SOIC-EP package and is ideal for applications such as signal conditioning, data acquisition, and medical instrumentation

The Atmel ATmega48/88/168 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega48/88/168 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed

Linear Voltage Regulator IC Positive Fixed 1 Output 3.3V 150mA 6-SON (2x2) Digi-Key LDO Regulator Pos 3.3V 0.15A 6-Pin WSON EP T/R Arrow LDO Voltage Regulators 150mA 30V Ultra-Low IQ Wide Inpt LDO Reg

The ALTERA EP3C10E144I7N FPGA is a powerful and reliable Field Programmable Gate Array (FPGA) designed for a wide range of applications. This FPGA features 94 I/O pins, a 144-LQFP Exposed Pad, and a Cyclone® III 423936 Bits. It is designed to operate in temperatures ranging from -40°C to 100°C (TJ). The EP3C10E144I7N is powered by a voltage range of 1.15 V to 1.25 V. The EP3C10E144I7N is a surface mount FPGA that is ideal for applications that require high performance and reliability. It is designed to provide a low-cost solution for applications that require a high level of integration and flexibility. The EP3C10E144I7N is also designed to be easy to use and configure, making it an ideal choice for a wide range of applications.

The Cirrus Logic CS42L52-CNZ is a low-power, stereo audio codec with integrated headphone amplifier. It is designed to provide high-quality audio performance in a wide range of consumer and professional audio applications. The CS42L52-CNZ features a 24-bit serial interface, a wide operating temperature range of -40°C to 85°C, and a 40-QFN exposed pad (6x6) package. It operates from a single 1.65 V to 2.63 V supply voltage.

The TXB0104QRUTRQ1 voltage translator and level shifter from Texas Instruments is a four-channel, bidirectional, low-voltage translator capable of operating from 1.2 V to 3.6 V or 1.65 V to 5.5 V with a maximum supply voltage of 5.5 V. It has an ultra-low quiescent current of 3.5 µA and an operating temperature range of -40°C to +125°C.

Maxim Integrated Real Time Clocks DS1248Y-70+ is a 32-DIP module with a through-hole mounting style. Its key features include an operating temperature range of 0°C to 70°C, a parallel interface, and time/date formats like YY-MM-DD-dd and HH:MM:SS:hh (12/24 hr). This RTC is part of Maxim Integrated's DS1248 family of low-power real-time clocks that provide reliable and highly accurate time-keeping for improved data integrity and system reliability. It can be used in applications such as general and industrial measurements, RF communications, automotive, medical monitoring, and other embedded system time synchronization applications. Its compact form factor and low power consumption make it a great choice for your timekeeping needs. The DS1248Y-70+ is packaged in tubes for convenient handling and storage.

The AD9257 is an octal, 14-bit, 40 MSPS and 65 MSPS analogto-digital converter (ADC) with an on-chip sample-and-hold circuit designed for low cost, low power, small size, and ease of use. The product operates at a conversion rate of up to 65 MSPS and is optimized for outstanding dynamic performance and low power in applications where a small package size is critical.

This device is a dual center tap Schottky rectifier suited for switch mode power supply and high frequency DC to DC converters. Packaged in D2PAK, this device is especially intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. Features ■ Very small conduction losses ■ Negligible switching losses ■ Extremely fast switching ■ Low thermal resistance ■ Avalanche rated ■ AEC-Q101 qualified

The Infineon BTN8982TAAUMA1 is a full and half-bridge driver IC designed for motor control applications. It is a high-performance, low-cost, and low-power solution for driving brushless DC (BLDC) motors. The device features a wide operating voltage range of 4.5V to 36V, a wide operating temperature range of -40°C to +125°C, and a low quiescent current of only 1.5mA. The device also features a wide range of protection features, including over-temperature protection, over-current protection, and short-circuit protection

The MAXIM Interface - Drivers, Receivers, Transceivers MAX232CWE is a 16-SOIC package device that supports the RS232 protocol. It has two drivers and two receivers, and is packaged in a tube for easy installation. The device is designed for surface mount applications and has a 16-SOIC package case with a width of 0.295" (7.50mm). It operates on a voltage supply of 4.5 V to 5.5 V. This device is ideal for applications such as serial communication, data transfer, and other communication systems.

The Microchip Technology Inc. 24CXX, 24LCXX, 24AAXX and 24FCXX (24XX*) devices are a family of 128-bit through 512 Kbit Electrically Erased PROMs. The devices are organized in blocks of x8-bit memory with 2-wire serial interfaces. Low-voltage design permits operation down to 1.7V (for 24AAXX devices), with standby and active currents of only 1 μA and 1 mA, respectively. Devices 1 Kbit and larger have page write capability. Parts having functional address lines allow connection of up to 8 devices on the same bus. The 24XX family is available in the standard 8-pin PDIP, surface mount SOIC, TSSOP and MSOP pack ages. Most 128-bit through 16 Kbit devices are also available in the 5-lead SOT-23 package. DFN packages (2x3mm or 5x6mm) are also available. All packages are Pb-free (Matte Tin) finish. Features: • 128-bit through 512 Kbit devices • Single supply with operation down to 1.7V for 24AAXX devices • Low-power CMOS

ATMEL Microcontrollers ATSAMD21G18A-AU is a low-power MCU based on the ARM Cortex M0+ Core. This MCU has 38 I/O pins and is housed inside a 48-TQFP package. It also has an internal oscillator and a 48 MHz speed processor. The microcontroller has Connectivity features such as I2C, LIN, SPI, and UART/USART. Furthermore, it has 14x12b A/D Data Converters and 1x10b D/A Data Converters. The Brown-out Detect/Reset, DMA, I2S, POR, PWM and WDT are the peripherals included in this microcontroller. Features: • Low-power MCU based on the ARM Cortex M0+ Core • 38 I/O pins and 48-TQFP package • Internal oscillator and 48 MHz speed processor • Connectivity features such as I2C, LIN, SPI, and UART/USART • 14x12b A/D Data Converters & 1x10b D/A Data Converters • Brown-out Detect/Reset, DMA, I2S, POR, PWM and WDT peripherals Applications: • Automotive control systems • Industrial control systems • Robotics • Home Automation Systems • Data Acquisition and Signal Processing • Medical Devices

The TPS7A8500ARGRT is a linear voltage regulator IC from Texas Instruments. It is a positive adjustable/programmable regulator with one output and a maximum current of 4A. It is packaged in a 20-VQFN (3.5x3.5) package.

The LTC1594LCS#PBF is a microPOWER™ MUX-S/H-ADC from Linear Technology Integrated Circuits (ICs) Analog to Digital Converters (ADC). It has an operating temperature range of 0°C to 70°C and a data interface of SPI. It has an external reference type, a SAR architecture, a 5V voltage supply digital, 4 inputs, a single ended input type, and a 12-bit resolution.

The Qualcomm Interface AR8031-AL1B is a surface mount Ethernet transceiver designed for use in a wide range of applications. It is capable of operating over a temperature range of -40°C to 85°C and is powered by a 3.3V supply. The AR8031-AL1B is compliant with the IEEE 802.3 standard and supports 10/100/1000 Mbps data rates. Features: • Compliant with IEEE 802.3 standard • Supports 10/100/1000 Mbps data rates • Low power consumption • Surface mount design • Operating temperature range of -40°C to 85°C • Powered by a 3.3V supply Applications: The Qualcomm Interface AR8031-AL1B is suitable for a wide range of applications, including: • Industrial automation • Automotive • Networking • Telecommunications • Medical • Consumer electronics

The AD813ARZ-14 is a high-speed, low-power video amplifier module from Analog Devices Inc. It is designed for use in video applications such as video switching, video distribution, video signal processing, and video signal conditioning. It features a wide bandwidth of 100 MHz, a low current supply of 4.5 mA, and a slew rate of 250V/µs. It is available in a 14-SOIC package and operates over a temperature range of -40°C to 85°C.

The LT3751EFE#PBF from Analog Devices / Linear Technology is a specialized power management IC designed for use in battery charging applications. This IC is capable of controlling and charging up to 20 cells in series, making it ideal for use in high-capacity battery packs. It features a wide input voltage range of 4.5V to 40V, allowing it to be used in a variety of applications. The LT3751EFE#PBF also features a wide operating temperature range of -40°C to +125°C, making it suitable for use in extreme environments. Additionally, it has a low quiescent current of only 1.5mA, making it highly efficient. The LT3751EFE#PBF is housed in a 20-pin TSSOP package, making it easy to integrate into existing designs. With its wide input voltage range, wide operating temperature range, and low quiescent current, the LT3751EFE#PBF is an ideal choice for battery charging applications.

The LX7175CLD is a synchronous buck switching regulator from Microsemi. It is a 3.5A adjustable regulator with a 10-pin DFN package. It is designed to provide a high efficiency, low noise, and low output voltage ripple solution for a wide range of applications. • 3.5A adjustable output current • 10-pin DFN package • Synchronous buck switching regulator • High efficiency • Low noise • Low output voltage ripple • Wide input voltage range (4.5V to 28V) • Output voltage range (0.8V to 5.5V) • Programmable switching frequency (200kHz to 2.2MHz) • Programmable soft-start • Over-temperature protection • Over-current protection • Short-circuit protection Applications: The LX7175CLD is suitable for a wide range of applications, including: • Automotive • Industrial • Computing • Networking • Telecom • Portable electronics • Battery-powered systems

The LTC2440CGN#PBF is a high-performance, low-power, 16-bit, sigma-delta analog-to-digital converter (ADC) with an SPI interface. It is designed to provide accurate, low-noise conversion of differential analog signals in a wide range of applications. The LTC2440CGN#PBF features a wide input range of 0°C to 70°C, a low power consumption of only 1.2 mW, and a fast conversion rate of up to 1.5 MSPS. It also offers a wide range of features, including a programmable gain amplifier, a programmable digital filter, and a programmable reference voltage. The LTC2440CGN#PBF is ideal for applications such as medical imaging, industrial process control, and automotive systems. It is available in a 16-SSOP package and is RoHS compliant.

The Microchip Linear Voltage Regulators MCP1812AT-033/OT are designed to provide a reliable and efficient power supply solution for a variety of applications. This device is a 0.6V @ 300mA over current positive SC-74A SOT-753 voltage regulator. It features a low dropout voltage, low quiescent current, and high power supply rejection ratio. The device also has a wide input voltage range of 2.7V to 6.5V and a wide output voltage range of 0.6V to 5.5V. It is also capable of providing up to 300mA of output current. The device is also designed to be highly efficient, with a typical efficiency of up to 95%. The device is also designed to be highly reliable, with a maximum junction temperature of 150°C. The device is also RoHS compliant and is available in a variety of packages. The Microchip Linear Voltage Regulators MCP1812AT-033/OT are an ideal solution for providing a reliable and efficient power supply solution for a variety of applications.

The TI INA3221AQRGVRQ1 is a current shunt monitor IC designed to measure current in a wide range of applications. It features a wide input voltage range of up to 16V, low quiescent current, and low power consumption. The device also features a programmable gain of up to 200V/V, allowing for accurate current measurements over a wide range of current levels.

The Lattice LCMXO3LF-6900C-6BG256C is a low-cost, low-power, high-performance Field Programmable Gate Array (FPGA) device. It is a member of the Lattice MachXO3LF family of FPGAs and is designed to provide a cost-effective solution for a wide range of applications

The XCR3128XL-10VQ100C is a Complex Programmable Logic Device (CPLD) from Xilinx. It is a 9.1ns surface mount device with a temperature range of 0°C to 70°C (TA). It is in-system programmable with a minimum of 1K program/erase cycles. It is packaged in a 100-VQFP (14x14) CoolRunner XPLA3 tray.Features: • 9.1ns access time • 0°C to 70°C (TA) temperature range • In-system programmable with a minimum of 1K program/erase cycles • 100-VQFP (14x14) CoolRunner XPLA3 tray Applications: The XCR3128XL-10VQ100C CPLD is suitable for a wide range of applications, including: • Automotive • Industrial• Medical • Networking • Telecommunications • Consumer electronics • Aerospace and defense

The TI Linear Voltage Regulators TLV70433DBVT are low dropout (LDO) regulators that provide a regulated output voltage of 3.3V with an input voltage range of up to 24V. The device features a 150mA output current, 2% voltage regulation accuracy, and an operating temperature range of -40°C to 125°C. The device is available in a SOT-23-5, SC-74A, and SOT-753 package. The TLV70433DBVT is suitable for a wide range of applications, including automotive, industrial, and consumer electronics. It can be used in applications such as power management, voltage regulation, and battery charging.

Atmel ATXMEGA128A4U-MHR is an 8-bit microcontroller with 128KB of Flash memory and 44-pin QFN package. It is based on the AVR XMEGA architecture and is designed for applications requiring high performance, low power consumption, and advanced peripherals. Features: • 128KB of Flash memory • 44-pin QFN package • Up to 32MHz clock frequency • Up to 32-bit wide data bus • Up to 16-bit wide instruction bus • Up to 8-channel DMA controller • Up to 8-channel Event System • Up to 8-channel Analog Comparator • Up to 8-channel 10-bit ADC • Up to 4-channel 10-bit DAC • Up to 4-channel USART • Up to 4-channel SPI • Up to 4-channel I2C • Up to 4-channel Timer/Counter • Up to 4-channel PWM • Up to 4-channel RTC • Up to 4-channel Watchdog Timer • Up to 4-channel Event System • Up to 4-channel Real-Time Clock • Up to 4-channel Programmable Logic Unit • Up to 4-channel Programmable Gain Amplifier • Up to 4-channel Programmable Voltage Reference

The ON Semiconductor MC74VHC1G08DFT2G is a single 2-input AND gate in a SC-70 package. It is a high-speed CMOS logic device that operates from a single 5.5 V supply. The device features low power consumption and high noise immunity. Features: • Low power consumption • High noise immunity • Single 5.5 V supply • High-speed CMOS logic • Surface mount • Operating temperature range: -55°C to 125°C • Package: SC-70 • Alternate Packaging: Digi-ReelR • Input leakage current: 1μA Applications: The MC74VHC1G08DFT2G is suitable for a wide range of applications, including logic gates, logic buffers, and logic inverters. It is also suitable for use in automotive, industrial, and consumer applications.