Highly resilient - Import export

surface protection for concrete, crack filling, hydrophobic impregnation

Fibre-reinforced compound sliding bearing in wound technology | Maintenance-free | Highly resilient COM-KU®/D-438 Wear rings are a self-lubricating and maintenance-free compound guide ring. It has good sliding properties and is suitable for high loads (also impact loads and with edge pressure). Good damping properties, very suitable for low sliding speeds, good chemical resistance, long service life. The use of this guide ring simplifies the design of the cylinder head. Easy mounting possible in closed and undercut installation spaces.

7 powerful machine types The slim design allows drilling with minimal clearance to buildings High corrosion protection, e.g. due to fully galvanised rod boxes The engine hood is made of weather-proof GRP The electronics are shock- and vibration-proof High quality manufacturing and certified supplier components (motors, pumps etc.) Highly resilient, fail-safe and service reduced High value stability Wide range of applications Compatible with tensile load measuring unit with bore data log according to the latest standards Additional safety: prototype testing by the trade organisation

7 powerful machine types The slim design allows drilling with minimal clearance to buildings High corrosion protection, e.g. due to fully galvanised rod boxes The engine hood is made of weather-proof GRP The electronics are shock- and vibration-proof High quality manufacturing and certified supplier components (motors, pumps etc.) Highly resilient, fail-safe and service reduced High value stability Wide range of applications Compatible with tensile load measuring unit with bore data log according to the latest standards Additional safety: prototype testing by the trade organisation

Lithium complex grease Description Castrol LMX Li complex grease is a multi-purpose grease based on a lithium complex soap , especially developed for highly stressed lubrication points . The high performance makes it possible to use Castrol LMX Li complex grease as a lifetime lubrication even for high-temperature, high-speed rolling and ball bearings. Advantages very good pressure absorption capacity high aging resistance excellent corrosion protection good water resistance highly thermally resilient wear-protecting suitable for lifetime lubrication Specifications MAN 284 Li-H 2 MB approval 265.1 NLGI 2

Removable 4-sided cover in NIKO fabric with Resistex Bioceramic, which, thanks to the action of bioceramics, returns body heat in the form of FIR rays that can penetrate into the skin’s layers and activate the microcirculatory system, boosting metabolism. Resistex® Bioceramic has a high level of thermal insulation, which makes it possible to maintain a constant body temperature also in extremely cold conditions. Highly breathable Super Fresh layer that ensures a fresh feeling together with complete ergonomic comfort. 3 supporting layers of HR Foam, open-cell water-based foam, a highly resilient and highly elastic material. This product is breathable, environmentally friendly and non-deformable. Soft hypoallergenic fibre for the upper part, breathable fabric on the lower part of the mattress that ensures air circulation.

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

You can rely on the cast steel chain C600 to deal with the toughest traction applications and move the heaviest loads. The chain’s simple yet robust cast steel design makes it an economical and highly resilient partner for the most rugged conditions and over long distances. Highlights • Breaking loads increased about 25% by using cast steel rather than cast iron chains • Alternative galvanized, zinc plated version for corrosion protection • Threaded pins in connecting link for easy closing and unclosing of chain • Both versions also available in plastic

AGVs are designed to transport heavy loads on a continuous basis. The specific structural and mechanical demands are extremely high. However, we fulfill them in a reliable way with our NGV planetary gearboxes. Because the gearboxes impress with their compact design, efficiency and durability. And we have specifically optimized them for use in AGVs.

BCF-yarns also have a higher resistance to pull then staple fibers. Moreover, BCF-yarns have a higher luster than staple. Due to this, manufacturers will often use BCF in low-weight carpets, as the increased light reflection helps the product to appear bulkier. NYOBE STAYS WITH PA6 YARNS, SINCE 1976 Nylon revolutionized the carpeting industry as the first synthetic fiber – early adopted by Mr. R. De Clerck – and quickly became the new benchmark. There are many features of nylon that other fibers are not able to offer: • highly durable • strong • stands up very well to abrasion • highly resilient • very good texture retention to maintain its original appearance • Premium hand & foot feeling and soft • pilling resistant • brilliant colors and maintaining its colors • excellently printable and dyeable

With HPD you have the option of either hosting our software solutions yourself or taking advantage of our continuous investment in highly resilient hosted managed services data centres.