High-resistance steels - Import export

Light-weight premixed structural concrete, standard UNI EN 206-1 with resistance class LC 20/22 type CLS 1.4; class LC 30/33 type CLS 1.6; class LC 40/44 type CLS 1.8 based on hydraulic binders and hollow spheres of glass, for indoor and outdoor use. To be applied by mechanical projection or by hand for lightened structural concretes in general. It does not corrode metals but protects them if wrapped completely. To be used for internal and external structural castings, for concrete in general with lightness and high resistance characteristics, for collaborative castings on slabs in Putrelle/Laterizio, laterocement, Wood. Type CLS 1.4 Available for quick drying type "R". FPC 0925 production process certificate.

Activated in a few seconds on site Very robust compact construction •Invertable fork with adjustable width Two Ø 200 mm wheels for easy transport on site • Base equipped with 2 stabilizing arms • Feet with adjustable height wheels Lifting cable anti-torsion in very high resistance steel Level for perfect control of the position of the feet Lifting winch with automatic brake • Steel pulleys on bearings

DryLin® R shafts and supported shafts - Technical data DryLin® R - AWMP Precision aluminum shaft, mm DryLin® R - AWMP DryLin® R - AWMU Supported aluminum shaft, mm DryLin® R - AWMU DryLin® R - SWM/EWM An steel or stainless steel precision shaft, mm DryLin® R - SWM/EWM DryLin® R - SWUM/EWUM Supported steel shaft orstainless steel shaft, mm DryLin® R - SWUM/EWUM DryLin® R - SWUMN/EWUMN Low supported steel shaft orstainless steel shaft, mm DryLin® R - SWUMN/EWUMN DryLin® R - EWUM Partially supported stainless steel shaft, mm DryLin® R - EWUM-Ø DryLin® R - CWM Carbon-fiber shaft, mm DryLin® R - CWM DryLin® R - AWMP Precision aluminum shaft, mm DryLin® R - AWMP DryLin® R - AWMU Supported aluminum shaft, mm DryLin® R - AWMU DryLin® R - SWM/EWM An steel or stainless steel precision shaft, mm DryLin® R - SWM/EWM DryLin® R - SWUM/EWUM Supported steel shaft orstainless steel shaft, mm DryLin® R - SWUM/EWUM DryLin® R - SWUMN/EWUMN Low supported steel shaft orstainless steel shaft, mm DryLin® R - SWUMN/EWUMN DryLin® R - EWUM Partially supported stainless steel shaft, mm DryLin® R - EWUM-Ø DryLin® R - CWM Carbon-fiber shaft, mm DryLin® R - CWM Aluminum Low weight Lower wear of the plain bearing Corrosion resistant Ideal in combination with liners made of iglidur® J/J 200 Delivered off the shelf Steel Low-priced standard High load capacity Application in dry area Hard chrome-plated also available Lower coefficient of friction against plastic bearing Stainless steel High corrosion-resistance High resistance to chemicals Ideal solution for the wet area V4A for extreme chemical intensive applications Female thread, axial male thread Pins Groove cut-in Spanner flat Female thread, radial Special machining All shafts can be individually machined. Please send us your drawing. We'll submit an offer to you in a short time. Shaft request

CNC machining high carbon Steel parts

Xian Huan-tai Technology and Development Corp., Ltd Specializes in manufacturing and exporting investment castings and sand casting. Our company founded in1995 Covering 30000 square meters, with the annual output capacity of 1200 tons. The company has production capabilities of tool making, investment casting with all silica sol process, machining and heat treatment. Huan-tai has become a leading metal parts manufacturer in south of China, Relying on the integrated superiority in advanced equipments and professional team. The company offers OEM service of investment castings& sand casting and other metal parts. The castings are exported to USA, Germany, France, Canada, Italy, Spain and many other countries. Customers at home and abroad are warmly welcome to hold business talks with us. APPLICATION FIELDS: Crusher equipment, Machinery parts and components, Mobile parts, Pipe couplings, Tools hardware, Kitchen hardware, Shower hardware，Lamps hardware, Marine hardware, Building hardware,

Xian Huan-tai Technology and Development Corp., Ltd Specializes in manufacturing and exporting investment castings and sand casting. Our company founded in1995 Covering 30000 square meters, with the annual output capacity of 1200 tons. The company has production capabilities of tool making, investment casting with all silica sol process, machining and heat treatment. Huan-tai has become a leading metal parts manufacturer in south of China, Relying on the integrated superiority in advanced equipments and professional team. The company offers OEM service of investment castings& sand casting and other metal parts. The castings are exported to USA, Germany, France, Canada, Italy, Spain and many other countries. Customers at home and abroad are warmly welcome to hold business talks with us. APPLICATION FIELDS: Crusher equipment, Machinery parts and components, Mobile parts, Pipe couplings, Tools hardware, Kitchen hardware, Shower hardware，Lamps hardware, Marine hardware, Building hardware,

Xian Huan-tai Technology and Development Corp., Ltd Specializes in manufacturing and exporting investment castings and sand casting. Our company founded in1995 Covering 30000 square meters, with the annual output capacity of 1200 tons. The company has production capabilities of tool making, investment casting with all silica sol process, machining and heat treatment. Huan-tai has become a leading metal parts manufacturer in south of China, Relying on the integrated superiority in advanced equipments and professional team. The company offers OEM service of investment castings& sand casting and other metal parts. The castings are exported to USA, Germany, France, Canada, Italy, Spain and many other countries. Customers at home and abroad are warmly welcome to hold business talks with us. APPLICATION FIELDS: Crusher equipment, Machinery parts and components, Mobile parts, Pipe couplings, Tools hardware, Kitchen hardware, Shower hardware，Lamps hardware, Marine hardware, Building hardware,

A dexterous high cut resistance glove, glass and steel fibre free. Ideal in dry or greasy conditions.

A dexterous high cut resistance glove, glass and steel fibre free. Ideal in dry or greasy conditions.

Keiper self-guiding PU track timing belts are made of abrasion-resistant polyurethane and high-strength steel cords or aramid cords and produced in open lengths. The V-guide is either integrated in the timing belt during production or welded into the belt later. These timing belts exhibit the same properties as standard timing belts. In addition, axial movements are prevented. Keiper self-guiding PU track timing belts are available as endlessly welded belts and cut goods, in almost any length and width. Properties and special features: Prevent axial movements V-profile guides can be combined with any tooth profile in all sizes Flanges are no longer required, the notched design of the V-profile guide gives rise to high flexibility Applications: Conveying and positioning applications with large center distances Applications, in which axial movement is a problem and flanges cannot be used.

Keiper PU molded timing belts (form belts), which are cast in special molds, are made of abrasion-resistant polyurethane and high-strength steel cords (or aramid cords). The cast PU timing belt is an exact replica of its mold. Consequently, high pitch accuracy along the entire length of the belt is realized. They are particularly well suited for smooth running and high speeds. By combining high-quality materials and this modern production method, the resulting timing belts exhibit supreme mechanical, chemical and physical properties. Mechanical properties: Low longitudinal tolerance Longitudinal stability, negligible elongation Form-fit, synchronous running Low noise High abrasion resistance Favorable performance-weight ratio Chemical properties: Good ageing resistance Operating temperature range from -30°C to +80°C Resistant to simple oils, greases and gasoline Applications All types of drives Office machines Textile machines Wood-processing machines

Keiper PU Flex timing belts are extruded of abrasion-resistant polyurethane and high-strength steel cords, aramid cords or high flexible steel cords and VA steel with endless winded cords. In these belts the cords are helically spooled. These timing belts can be used for all kinds of power transmission applications because of their high power transfer, and their high flexibility make them suitable for synchronous transport and positioning applications. By using standard polyurethane and such other belt materials as polyurethane that is cold resistant, heat resistant or suitable for contact with foodstuffs a wide spectrum of applications is possible.

Keiper open-ended PU timing belts are made of abrasion-resistant polyurethane and high-strength steel cords or aramid cords and are available in open lengths. These timing belts are very suitable for synchronous conveying and positioning applications because they have very high flexibility and can be made with many different tooth shapes and materials; when combined with different tension cords, innumerable applications are possible. Keiper open-ended PU timing belts can be produced endless welded and by the meter in almost all lengths and widths. Based on this combination of high-quality materials and production methods, these belts exhibit outstanding mechanical, chemical and physical properties. Endless welded timing belts are available in any length. Welded PU timing belts primarily are used in conveying technology.

Stainless steel with high resistance to wear and the action of Orings in VITON.

Stainless steel with high resistance to wear and the action of VITON Orings

Stainless steel with high resistance to wear and the action of chemical products, material nozzle protection.

Stainless steel with high resistance to wear and the action of chemical products, material nozzle protection

Magtrol Miniature Load Measuring Pins are used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s MB-02 Series Miniature Load Pins are rugged with high resistance stainless steel and tight construction, designed specifically for use in harsh industrial environment.

MAGTROL offers a wide range of Load-Force-Weight Transducers with optional integrated electronics or Load Monitoring Units (LMU) with B.I.T.E. functions creating an ideal measurement system which continuously checks for overloads and short circuits. Idealy for use on Safety Applications according to ECE-R10, ISO 13849-1 : CAT4 & PLe and IEC 62061 : SIL3 (LE 6XX SERIES); ISO 13849-1 : CAT2 & PLd and IEC 62061 : SIL2 (LE 4XX SERIES) Magtrol Load Measuring Pins are used to measure load and force, and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s LE Series Load Measuring Pins are rugged with high resistance stainless steel and tight construction. Available in several standard ranges from 2.5 kN to 1 250 kN. .... more information www.magtrol.com

LB Series Load Measuring Pins can be used alone or as part of a complete measurement system. Magtrol offers a wide range of Load-Force-Weight Transducers in various executions and accuracy classes and our Load Monitoring Units (LMUs) constitute an ideal safe measurement system which continuously checks for overloads and short circuits. MAGTROL Load Measuring Pins are used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s LB 2XX Series Load Pins are rugged with high resistance stainless steel and tight construction, designed specifically for use in harsh industrial environments. Available in several standard ranges from 2.5 kN to 1250 kN, these highly ergonomic pins can be used for either new or refitted installations and are adaptable to various conditions.

SS 305 is an austenitic Chromium-Nickel stainless steel with excellent corrosion resistance, and is suitable for very severe cold forming operations. A high nickel content reduces the work hardening rate so that it can be formed into electronic components and remain non-magnetic. The alloy is readily formable and work hardens slowly.It has good resistance to nitric and sulfuric acid solutions although it will not resist halogen acids. The alloy can be satisfactorily welded, brazed, and soldered. Available Sizes: SS 305 is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.050” (0.0127 mm to 1.27 mm) in widths up to 12.0” (304.8 mm). It is also available in foil as thin as 0.000200” (0.00508 mm) in widths of 4.0” (101.6 mm) maximum. The material conforms to ASTM A240, QQS-766, and UNS S30500.

17-4 PH®, a wrought compressed stainless steel powder, combines high strength and high hardness with excellent corrosion resistance, fracture toughness and heat treatment properties. When machined, 17-4 PH® produces long, gummy chips. While soft and ductile in an annealed condition, it is capable of high hardness properties with a single precipitation or aging treatment. Applications 17-4 PH® is ideal for manufacturing aircraft fittings, braces, chemical processing components, coupling, fasteners, gas turbines, gears, hydraulic actuators, jet engines, nuclear reactor parts, pump shafts, rocket and missile components, valve stems and wear rings. The physical properties of 17-4 PH® stainless steel make it weldable by common fusion and resistance techniques. Among members of the precipitation hardening class of stainless steels, 17-4 PH® has the best weldability.

Stainless steel powder 409L/409CB is a ferritic, weldable grade of stainless steel with key performance features, including high compressibility, enhanced green strength and good sinterability. This stabilized grade provides excellent corrosion resistance and has the capacity to provide high-caliber mechanical properties due to the high temperature sintering response. 409L/409CB’s versatility also results from Cb being less prone to oxidation than Ti. In addition, the oxide is unable to combine with carbon and the Cb forms a stable carbide which prevents coarsening of carbides and grains in the weld’s HAZ. 409L/409CB Stainless steel is a prime candidate for automotive exhaust system applications, among other uses. 409LNI Powder has added nickel for new automotive specifications. Ferritic stainless steel powdered metallurgy (P/M) technology is specified for longer-term performance and reliability. Good atmospheric and saline corrosion

VESTA oven – is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm.

VESTA oven is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm

VESTA oven – is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm.

VESTA oven is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm

The microstructures inside duplex stainless steels are approximately 50 per cent austenite and 50 per cent ferrite, and consequently duplex products share the physical properties of both ferritic and austenitic grades. Duplex stainless steels are resistant to the cracking caused by chloride stress corrosion in austenitic grades, and have improved resistance to localised corrosion. This family of stainless steels has roughly twice the yield strength of their counterpart austenitic grades . Higher hardness values provide better wear resistance for high precision tubes. Duplex stainless steel tubes have high hardness and wear resistance propertiesDuplex steels are easily welded and formed, similar to austenitic grades. Depending on chromium, nickel and molybdenum content, duplex stainless steels are divided into four main categories: lean duplex, duplex, super duplex and hyper duplex. Please note that we have a minimum order value of £10,000.

The project was inspired by dandelions which are present in nature. The idea of Dandelions is to capture floral delicacy using “heavy material” - metal. The delicate nature of Dandelions contrasts the monumental architecture of the city. Dandelions are made of high quality acid resistant stainless electropolished steel. It does not require special maintenance. It is totally water, storm and winter-proof.